Residential demand management using individualised demand aware price policies

This paper presents a novel approach to Demand Side Management (DSM), using an “individualised” price policy, where each end user receives a separate electricity pricing scheme designed to incentivise demand management in order to optimally manage flexible demands. These pricing schemes have the objective of reducing the peaks in overall system demand in such a way that the average electricity price each individual user receives is non-discriminatory. It is shown in the paper that this approach has a number of advantages and benefits compared to traditional DSM approaches. The “demand aware price policy” approach outlined in this paper exploits the knowledge, or demand-awareness, obtained from advanced metering infrastructure. The presented analysis includes a detailed case study of an existing European distribution network where DSM trial data was available from the residential end-users

Parallel statistical model checking for safety verification in smart grids

By using small computing devices deployed at user premises, Autonomous Demand Response (ADR) adapts users electricity consumption to given time-dependent electricity tariffs. This allows end-users to save on their electricity bill and Distribution System Operators to optimise (through suitable time-dependent tariffs) management of the electric grid by avoiding demand peaks. Unfortunately, even with ADR, users power consumption may deviate from the expected (minimum cost) one, e.g., because ADR devices fail to correctly forecast energy needs at user premises. As a result, the aggregated power demand may present undesirable peaks. In this paper we address such a problem by presenting methods and a software tool (APD-Analyser) implementing them, enabling Distribution System Operators to effectively verify that a given time-dependent electricity tariff achieves the desired goals even when end-users deviate from their expected behaviour. We show feasibility of the proposed approach through a realistic scenario from a medium voltage Danish distribution network

User flexibility aware price policy synthesis for smart grids

In order to optimally manage a modern electricity distribution network, peaks in residential users demand should be avoided, as this can reduce energy and network asset management costs. Furthermore, this must be done without compressing residential users demand. To this aim, in a demand response setting, residential users are given a price policy, which economically motivates them to shift their loads in order to achieve this goal. However, if the price policy for all users is similar, this demand response may result in simply shifting the demand peaks (peak rebound), leaving the problem unsolved. In this paper we propose a novel methodology which i) for each network substation s, automatically computes the desired power profile to be kept in order to optimally manage the network itself, ii) for each network substation s, automatically synthesizes individualized price policies for residential users connected to s, so that s is kept at the desired profile. Note that price policies individualization avoids the peak rebound problem, as different users have different low tariff areas. Furthermore, our methodology measures the flexibility of a residential user as the capacity needed by a home energy storage system (e.g., a battery) to always follow the given price policy, thus mitigating residential users discomfort. We show the feasibility of our approach on a realistic scenario taken from an existing medium voltage Danish distribution network

Optimal fault-tolerant placement of relay nodes in a mission critical wireless network

The operations of many critical infrastructures (e.g., airports) heavily depend on proper functioning of the radio communication network supporting operations. As a result, such a communication network is indeed a mission-critical communication network that needs adequate protection from external electromagnetic interferences. This is usually done through radiogoniometers. Basically, by using at least three suitably deployed radiogoniometers and a gateway gathering information from them, sources of electromagnetic emissions that are not supposed to be present in the monitored area can be localised. Typically, relay nodes are used to connect radiogoniometers to the gateway. As a result, some degree of fault-tolerance for the network of relay nodes is essential in order to offer a reliable monitoring. On the other hand, deployment of relay nodes is typically quite expensive. As a result, we have two conflicting requirements: minimise costs while guaranteeing a given fault-tolerance. In this paper address the problem of computing a deployment for relay nodes that minimises the relay node network cost while at the same time guaranteeing proper working of the network even when some of the relay nodes (up to a given maximum number) become faulty (fault-tolerance). We show that the above problem can be formulated as a Mixed Integer Linear Programming (MILP) as well as a Pseudo-Boolean Satisfiability (PB-SAT) optimisation problem and present experimental results com- paring the two approaches on realistic scenarios

On minimising the maximum expected verification time

Cyber Physical Systems (CPSs) consist of hardware and software components. To verify that the whole (i.e., software + hardware) system meets the given specifications, exhaustive simulation-based approaches (Hardware In the Loop Simulation, HILS) can be effectively used by first generating all relevant simulation scenarios (i.e., sequences of disturbances) and then actually simulating all of them (verification phase). When considering the whole verification activity, we see that the above mentioned verification phase is repeated until no error is found. Accordingly, in order to minimise the time taken by the whole verification activity, in each verification phase we should, ideally, start by simulating scenarios witnessing errors (counterexamples). Of course, to know beforehand the set of such scenarios is not feasible. In this paper we show how to select scenarios so as to minimise the Worst Case Expected Verification Tim

Hydrodynamics-Biology Coupling for Algae Culture and Biofuel Production

International audienceBiofuel production from microalgae represents an acute optimization problem for industry. There is a wide range of parameters that must be taken into account in the development of this technology. Here, mathematical modelling has a vital role to play. The potential of microalgae as a source of biofuel and as a technological solution for CO2 fixation is the subject of intense academic and industrial research. Large-scale production of microalgae has potential for biofuel applications owing to the high productivity that can be attained in high-rate raceway ponds. We show, through 3D numerical simulations, that our approach is capable of discriminating between situations where the paddle wheel is rapidly moving water or slowly agitating the process. Moreover, the simulated velocity fields can provide lagrangian trajectories of the algae. The resulting light pattern to which each cell is submitted when travelling from light (surface) to dark (bottom) can then be derived. It will then be reproduced in lab experiments to study photosynthesis under realistic light patterns

A Cross-Disciplinary Outlook of Directions and Challenges in Industrial Electronics

[EN] How to build a sustainable society in view of industrial electronics has been discussed from energy, information and communication technologies, cyber-physical systems (CPSs), and other viewpoints. This paper presents a cross-disciplinary view that integrates the fields of human factors, professional education, electronic systems on chip, resilience and security for industrial applications, technology ethics and society, and standards. After explaining the efforts and challenges in these fields, this paper shows a methodology for cross-disciplinary technology that integrates the technical committees in Cluster 4, Industrial Electronics Society. A project, which was launched in March 2022, implements a 'Proof of Concept' trial of the methodology.The work of Jinhua Sh was supported by JSPS Grant-in-Aid for Scientific Research B under Grant 22H03998 (Japan).She, J.; Guzman-Miranda, H.; Huang, V.; Chen, AC.; Karnouskos, S.; Dunai, L.; Ma, C.... (2022). A Cross-Disciplinary Outlook of Directions and Challenges in Industrial Electronics. IEEE Journal of Emerging and Selected Topics in Industrial Electronics (Online). 3:375-391. https://doi.org/10.1109/OJIES.2022.3174218375391