Statistical static timing analysis of nonzero clock skew circuit

As microprocessor and ASIC manufacturers continue to push the limits of transistor sizing into the sub-100nm regime, variations in the manufacturing process lead to increased uncertainty about the exact geometry and performance of the resulting devices. Traditional corner-based Static Timing Analysis (STA) assumes worst-case values for process parameters such as transistor channel length and threshold voltage when verifying integrated circuit timing performance. This has become unrea-sonably pessimistic and causes over-design that degrades full-chip performance, wastes engineering effort, and erodes profits while providing negligible yield improvement. Recently, Statistical Static Timing Analysis (SSTA) methods, which model process variations statistically as probability distribution functions (PDFs) rather than deterministically, have emerged to more accurately portray integrated circuit performance. This analysis has been thoroughly performed on traditional zero clock skew circuits where the synchronizing clock signal is assumed to arrive in phase with respect to each register. However, designers will often schedule the clock skew to different registers in order to decrease the minimum clock period of the entire circuit. Clock skew scheduling (CSS) imparts very different timing constraints that are based, in part, on the topology of the circuit. In this thesis, SSTA is applied to nonzero clock skew circuits in order to determine the accuracy improvement relative to their zero skew counterparts, and also to assess how the results of skew scheduling might be impacted with more accurate statistical modeling. For 99.7% timing yield (3 variation), SSTA is observed to improve the accuracy, and therefore increase the timing margin, of nonzero clock skew circuits by up to 2.5x, and on average by 1.3x, the amount seen by zero skew circuits.M.S., Computer Engineering -- Drexel University, 200

Advanced Timing and Synchronization Methodologies for Digital VLSI Integrated Circuits

This dissertation addresses timing and synchronization methodologies that are critical to the design, analysis and optimization of high-performance, integrated digital VLSI systems. As process sizes shrink and design complexities increase, achieving timing closure for digital VLSI circuits becomes a significant bottleneck in the integrated circuit design flow. Circuit designers are motivated to investigate and employ alternative methods to satisfy the timing and physical design performance targets. Such novel methods for the timing and synchronization of complex circuitry are developed in this dissertation and analyzed for performance and applicability.Mainstream integrated circuit design flow is normally tuned for zero clock skew, edge-triggered circuit design. Non-zero clock skew or multi-phase clock synchronization is seldom used because the lack of design automation tools increases the length and cost of the design cycle. For similar reasons, level-sensitive registers have not become an industry standard despite their superior size, speed and power consumption characteristics compared to conventional edge-triggered flip-flops.In this dissertation, novel design and analysis techniques that fully automate the design and analysis of non-zero clock skew circuits are presented. Clock skew scheduling of both edge-triggered and level-sensitive circuits are investigated in order to exploit maximum circuit performances. The effects of multi-phase clocking on non-zero clock skew, level-sensitive circuits are investigated leading to advanced synchronization methodologies. Improvements in the scalability of the computational timing analysis process with clock skew scheduling are explored through partitioning and parallelization.The integration of the proposed design and analysis methods to the physical design flow of integrated circuits synchronized with a next-generation clocking technology-resonant rotary clocking technology-is also presented. Based on the design and analysis methods presented in this dissertation, a computer-aided design tool for the design of rotary clock synchronized integrated circuits is developed

High performance IC clock networks with grid and tree topologies

In this dissertation, an essential step in the integrated circuit (IC) physical design flow—the clock network design—is investigated. Clock network design entailsa series of computationally intensive, large-scale design and optimization tasks for the generation and distribution of the clock signal through different topologies. The lack or inefficacy of the automation for implementing high performance clock networks, especially for low-power, high speed and variation-aware implementations, is the main driver for this research. The synthesis and optimization methods for the two most commonly used clock topologies in IC design—the grid topology and the tree topology—are primarily investigated.The clock mesh network, which uses the grid topology, has very low skew variation at the cost of high power dissipation. Two novel clock mesh network designmethodologies are proposed in this dissertation in order to reduce the power dissipation. These are the first methods known in literature that combine clock meshsynthesis with incremental register placement and clock gating for power saving purposes. The application of the proposed automation methods on the emerging resonant rotary clocking technology, which also has the grid topology, is investigated in this dissertation as well.The clock tree topology has the advantage of lower power dissipation compared to other traditional clock topologies (e.g. clock mesh, clock spine, clock tree with cross links) at the cost of increased performance degradation due to on-chip variations. A novel clock tree buffer polarity assignment flow is proposed in this dissertation in order to reduce these effects of on-chip variations on the clock tree topology. The proposed polarity assignment flow is the first work that introduces post-silicon, dynamic reconfigurability for polarity assignment, enabling clock gating for low power operation of the variation-tolerant clock tree networks.Ph.D., Electrical Engineering -- Drexel University, 201

Delay insertion method in clock skew scheduling

www.library.drexel.edu The following item is made available as a courtesy to scholars by the author(s) and Drexel University Library and may contain materials and content, including computer code and tags, artwork, text, graphics, images, and illustrations (Material) which may be protected by copyright law. Unless otherwise noted, the Material is made available for non profit and educational purposes, such as research, teaching and private study. For these limited purposes, you may reproduce (print, download or make copies) the Material without prior permission. All copies must include any copyright notice originally included with the Material. You must seek permission from the authors or copyright owners for all uses that are not allowed by fair use and other provisions of the U.S. Copyright Law. The responsibility for making an independent legal assessment and securing any necessary permission rests with persons desiring to reproduce or use the Material