Applications of artificial intelligence in dentistry: A comprehensive review

This work was funded by the Spanish Ministry of Sciences, Innovation and Universities under Projects RTI2018-101674-B-I00 and PGC2018-101904-A-100, University of Granada project A.TEP. 280.UGR18, I+D+I Junta de Andalucia 2020 project P20-00200, and Fapergs/Capes do Brasil grant 19/25510000928-3. Funding for open-access charge: Universidad de Granada/CBUAObjective: To perform a comprehensive review of the use of artificial intelligence (AI) and machine learning (ML) in dentistry, providing the community with a broad insight on the different advances that these technologies and tools have produced, paying special attention to the area of esthetic dentistry and color research. Materials and methods: The comprehensive review was conducted in MEDLINE/ PubMed, Web of Science, and Scopus databases, for papers published in English language in the last 20 years. Results: Out of 3871 eligible papers, 120 were included for final appraisal. Study methodologies included deep learning (DL; n = 76), fuzzy logic (FL; n = 12), and other ML techniques (n = 32), which were mainly applied to disease identification, image segmentation, image correction, and biomimetic color analysis and modeling. Conclusions: The insight provided by the present work has reported outstanding results in the design of high-performance decision support systems for the aforementioned areas. The future of digital dentistry goes through the design of integrated approaches providing personalized treatments to patients. In addition, esthetic dentistry can benefit from those advances by developing models allowing a complete characterization of tooth color, enhancing the accuracy of dental restorations. Clinical significance: The use of AI and ML has an increasing impact on the dental profession and is complementing the development of digital technologies and tools, with a wide application in treatment planning and esthetic dentistry procedures.Spanish Ministry of Sciences, Innovation and Universities RTI2018-101674-B-I00 PGC2018-101904-A-100University of Granada project A.TEP. 280.UGR18Junta de Andalucia P20-00200Fapergs/Capes do Brasil grant 19/25510000928-3Universidad de Granada/CBU

Craniofacial Growth Series Volume 56

https://deepblue.lib.umich.edu/bitstream/2027.42/153991/1/56th volume CF growth series FINAL 02262020.pdfDescription of 56th volume CF growth series FINAL 02262020.pdf : Proceedings of the 46th Annual Moyers Symposium and 44th Moyers Presymposiu

Advanced Applications of Rapid Prototyping Technology in Modern Engineering

Rapid prototyping (RP) technology has been widely known and appreciated due to its flexible and customized manufacturing capabilities. The widely studied RP techniques include stereolithography apparatus (SLA), selective laser sintering (SLS), three-dimensional printing (3DP), fused deposition modeling (FDM), 3D plotting, solid ground curing (SGC), multiphase jet solidification (MJS), laminated object manufacturing (LOM). Different techniques are associated with different materials and/or processing principles and thus are devoted to specific applications. RP technology has no longer been only for prototype building rather has been extended for real industrial manufacturing solutions. Today, the RP technology has contributed to almost all engineering areas that include mechanical, materials, industrial, aerospace, electrical and most recently biomedical engineering. This book aims to present the advanced development of RP technologies in various engineering areas as the solutions to the real world engineering problems

Prediction of Robot Execution Failures Using Neural Networks

In recent years, the industrial robotic systems are designed with abilities to adapt and to learn in a structured or unstructured environment. They are able to predict and to react to the undesirable and uncontrollable disturbances which frequently interfere in mission accomplishment. In order to prevent system failure and/or unwanted robot behaviour, various techniques have been addressed. In this study, a novel approach based on the neural networks (NNs) is employed for prediction of robot execution failures. The training and testing dataset used in the experiment consists of forces and torques memorized immediately after the real robot failed in assignment execution. Two types of networks are utilized in order to find best prediction method - recurrent NNs and feedforward NNs. Moreover, we investigated 24 neural architectures implemented in Matlab software package. The experimental results confirm that this approach can be successfully applied to the failures prediction problem, and that the NNs outperform other artificial intelligence techniques in this domain. To further validate a novel method, real world experiments are conducted on a Khepera II mobile robot in an indoor structured environment. The obtained results for trajectory tracking problem proved usefulness and the applicability of the proposed solution

Neural Extended Kalman Filter for State Estimation of Automated Guided Vehicle in Manufacturing Environment

To navigate autonomously in a manufacturing environment Automated Guided Vehicle (AGV) needs the ability to infer its pose. This paper presents the implementation of the Extended Kalman Filter (EKF) coupled with a feedforward neural network for the Visual Simultaneous Localization and Mapping (VSLAM). The neural extended Kalman filter (NEKF) is applied on-line to model error between real and estimated robot motion. Implementation of the NEKF is achieved by using mobile robot, an experimental environment and a simple camera. By introducing neural network into the EKF estimation procedure, the quality of performance can be improved

Reinforcement Learning Approach for Autonomous UAV Navigation in 3D Space

In the last two decades, the rapid development of unmanned aerial vehicles (UAVs) resulted in their usage for a wide range of applications. Miniaturization and cost reduction of electrical components have led to their commercialization, and today they can be utilized for various tasks in an unknown environment. Finding the optimal path based on the start and target pose information is one of the most complex demands for any intelligent UAV system. As this problem requires a high level of adaptability and learning capability of the UAV, the framework based on reinforcement learning is proposed for the localization and navigation tasks. In this paper, Q-learning algorithm for the autonomous navigation of the UAV in 3D space is implemented. To test the proposed methodology for UAV intelligent control, the simulation is conducted in ROS-Gazebo environment. The obtained simulation results have shown that the UAV can reach the target pose autonomously in an efficient way

Reinforcement Learning Approach for Autonomous UAV Navigation in 3D Space

In the last two decades, the rapid development of unmanned aerial vehicles (UAVs) resulted in their usage for a wide range of applications. Miniaturization and cost reduction of electrical components have led to their commercialization, and today they can be utilized for various tasks in an unknown environment. Finding the optimal path based on the start and target pose information is one of the most complex demands for any intelligent UAV system. As this problem requires a high level of adaptability and learning capability of the UAV, the framework based on reinforcement learning is proposed for the localization and navigation tasks. In this paper, Q-learning algorithm for the autonomous navigation of the UAV in 3D space is implemented. To test the proposed methodology for UAV intelligent control, the simulation is conducted in ROS-Gazebo environment. The obtained simulation results have shown that the UAV can reach the target pose autonomously in an efficient way

Rethinking the risk matrix

So far risk has been mostly defined as the expected value of a loss, mathematically PL (being P the probability of an adverse event and L the loss incurred as a consequence of the adverse event). The so called risk matrix follows from such definition. This definition of risk is justified in a long term “managerial” perspective, in which it is conceivable to distribute the effects of an adverse event on a large number of subjects or a large number of recurrences. In other words, this definition is mostly justified on frequentist terms. Moreover, according to this definition, in two extreme situations (high-probability/low-consequence and low-probability/high-consequence), the estimated risk is low. This logic is against the principles of sustainability and continuous improvement, which should impose instead both a continuous search for lower probabilities of adverse events (higher and higher reliability) and a continuous search for lower impact of adverse events (in accordance with the fail-safe principle). In this work a different definition of risk is proposed, which stems from the idea of safeguard: (1Risk)=(1P)(1L). According to this definition, the risk levels can be considered low only when both the probability of the adverse event and the loss are small. Such perspective, in which the calculation of safeguard is privileged to the calculation of risk, would possibly avoid exposing the Society to catastrophic consequences, sometimes due to wrong or oversimplified use of probabilistic models. Therefore, it can be seen as the citizen’s perspective to the definition of risk

Aerospace Medicine and Biology: A continuing bibliography with indexes

This bibliography lists 319 reports, articles, and other documents introduced into the NASA scientific and technical information system in May 1986