Prediction-Based Energy Saving Mechanism in 3GPP NB-IoT Networks

The current expansion of the Internet of things (IoT) demands improved communication platforms that support a wide area with low energy consumption. The 3rd Generation Partnership Project introduced narrowband IoT (NB-IoT) as IoT communication solutions. NB-IoT devices should be available for over 10 years without requiring a battery replacement. Thus, a low energy consumption is essential for the successful deployment of this technology. Given that a high amount of energy is consumed for radio transmission by the power amplifier, reducing the uplink transmission time is key to ensure a long lifespan of an IoT device. In this paper, we propose a prediction-based energy saving mechanism (PBESM) that is focused on enhanced uplink transmission. The mechanism consists of two parts: first, the network architecture that predicts the uplink packet occurrence through a deep packet inspection; second, an algorithm that predicts the processing delay and pre-assigns radio resources to enhance the scheduling request procedure. In this way, our mechanism reduces the number of random accesses and the energy consumed by radio transmission. Simulation results showed that the energy consumption using the proposed PBESM is reduced by up to 34% in comparison with that in the conventional NB-IoT method

Semi-persistent RRC protocol for machine-type communication devices in LTE networks

In this paper, we investigate the design of a radio resource control (RRC) protocol in the framework of long-term evolution (LTE) of the 3rd Generation Partnership Project regarding provision of low cost/complexity and low energy consumption machine-type communication (MTC), which is an enabling technology for the emerging paradigm of the Internet of Things. Due to the nature and envisaged battery-operated long-life operation of MTC devices without human intervention, energy efficiency becomes extremely important. This paper elaborates the state-of-the-art approaches toward addressing the challenge in relation to the low energy consumption operation of MTC devices, and proposes a novel RRC protocol design, namely, semi-persistent RRC state transition (SPRST), where the RRC state transition is no longer triggered by incoming traffic but depends on pre-determined parameters based on the traffic pattern obtained by exploiting the network memory. The proposed RRC protocol can easily co-exist with the legacy RRC protocol in the LTE. The design criterion of SPRST is derived and the signalling procedure is investigated accordingly. Based upon the simulation results, it is shown that the SPRST significantly reduces both the energy consumption and the signalling overhead while at the same time guarantees the quality of service requirements

Saving Energy in Mobile Devices for On-Demand Multimedia Streaming -- A Cross-Layer Approach

This paper proposes a novel energy-efficient multimedia delivery system called EStreamer. First, we study the relationship between buffer size at the client, burst-shaped TCP-based multimedia traffic, and energy consumption of wireless network interfaces in smartphones. Based on the study, we design and implement EStreamer for constant bit rate and rate-adaptive streaming. EStreamer can improve battery lifetime by 3x, 1.5x and 2x while streaming over Wi-Fi, 3G and 4G respectively.Comment: Accepted in ACM Transactions on Multimedia Computing, Communications and Applications (ACM TOMCCAP), November 201

Optimized LTE Data Transmission Procedures for IoT: Device Side Energy Consumption Analysis

The efficient deployment of Internet of Things (IoT) over cellular networks, such as Long Term Evolution (LTE) or the next generation 5G, entails several challenges. For massive IoT, reducing the energy consumption on the device side becomes essential. One of the main characteristics of massive IoT is small data transmissions. To improve the support of them, the 3GPP has included two novel optimizations in LTE: one of them based on the Control Plane (CP), and the other on the User Plane (UP). In this paper, we analyze the average energy consumption per data packet using these two optimizations compared to conventional LTE Service Request procedure. We propose an analytical model to calculate the energy consumption for each procedure based on a Markov chain. In the considered scenario, for large and small Inter-Arrival Times (IATs), the results of the three procedures are similar. While for medium IATs CP reduces the energy consumption per packet up to 87% due to its connection release optimization

Performance Evaluation of Power Efficient Mechanisms on Multimedia over LTE-A Networks

Power optimization is a critical challenge in multimedia services over cellular communication systems. Long Term Evolution-Advanced (LTE-A) has been developed for higher bandwidth access for accommodating today’s heavy data applications to provide better performance. Idle mode permits cellularstations to manipulate power and sources with the aid of limiting its activity for discrete periods and this eliminates the lively requirement for handover and other ordinary operations. Also, provides a periodical method for the cell station for pending downlink traffic directed to the cellularstation and as a result gets rid network handover traffic from basically inactive cellular stations. Discontinuous Reception (DRX) has been carried out to decrease the power intake of the consumer device, and transmission of big quantity of data. At data transfer, mobile device and the network phases negotiation occur. During other times, the device turns its receiver off and enters a low power state. Thereby similarly assisting numerous services and big quantities of information transmissions. This study prepossession of a massive quantity of data. Also proposes the two-power optimization modes idle mode and DRX mode parameters to achieve maximum possible power saving with the higher quality of multimedia services. Furthermore, the effectiveness of using DRX short cycles and DRX long cycles on multimedia services and the overall performance. Using OPNET Simulator 17.5, it concluded that DRX mechanism is preferred to operate compared with the Idle mechanism, also resulted that the DRX long cycles are a very good choice for all multimedia services and the overall network performance

On the effect of combining cooperative communication with sleep mode

Cooperation is crucial in (next-generation) wireless networks as it can greatly attribute to ensuring connectivity, reliability, performance, ... Relaying looks promising in a wide variety of network types (cellular, ad-hoc on-demand), each using a certain protocol. Energy efficiency constitutes another key aspect of such networks, as battery power is often limited, and is typically achieved by sleep mode operation. As the range of applications is very broad, rather than modelling one of the protocols in detail, we construct a high-level model capturing the two essential characteristics of cooperation and energy efficiency: relaying and sleep mode, and study their interaction. The used analytical approach allows for accurate performance evaluation and enables us to unveil less trivial trade-offs and to formulate rules-of-thumb applicable across all potential scenarios