Multifunctional MIMO systems: A combined diversity and multiplexing design perspective

In this treatise we investigate the design alternatives of different multiple-input multiple-output schemes while considering the attainable diversity gains, multiplexing gains, and beamforming gains. Following a brief classification of different MIMO schemes, where the different MIMO schemes are categorized as diversity techniques, multiplexing schemes, multiple access arrangements, and beamforming techniques, we introduce the family of multifunctional MIMOs. These multifunctional MIMOs are capable of combining the benefits of several MIMO schemes and hence attaining improved performance in terms of both their bit error rate as well as throughput. The family of multifunctional MIMOs combines the benefits of both space-time coding and the Bell Labs layered space-time scheme as well as those of beamforming. We also introduce the idea of layered steered space-time spreading, which combines the benefits of space-time spreading, V-BLAST, and beamforming with those of the generalized multicarrier direct sequence code-division multiple access concept. Additionally, we compare the attainable diversity, multiplexing, and beamforming gains of the different MIMO schemes in order to document the advantages of multifunctional MIMOs over conventional MIMO schemes

Downlink Steered Space-Time Spreading Assisted Generalised Multicarrier DS-CDMA Using Sphere-Packing-Aided Multilevel Coding

This paper presents a novel generalised Multi-Carrier Direct Sequence Code Division Multiple Access (MC DS-CDMA) system invoking smart antennas for improving the achievable performance in the downlink, as well as employing multi-dimensional Sphere Packing (SP) modulation for increasing the achievable diversity product. In this contribution, the MC DS-CDMA transmitter considered employs multiple Antenna Arrays (AA) and each of the AAs consists of several antenna elements. Furthermore, the proposed system employs both time- and frequency- (TF) domain spreading for extending the achievable capacity, when combined with a novel user-grouping technique for reducing the effects of Multiuser Interference (MUI). Moreover, in order to further enhance the system’s performance, we invoke a MultiLevel Coding (MLC) scheme, whose component codes are determined using the so-called equivalent capacity based constituent-code rate-calculation procedure invoking a 4-dimensional bit-to-SP-symbol mapping scheme. Our results demonstrate an approximately 3.8 dB Eb/N0 gain over an identical throughput scheme dispensing with SP modulation at a BER of 10?5

Layered Steered Space–Time-Spreading-Aided Generalized MC DS-CDMA

Abstract—We present a novel trifunctional multiple-input– multiple-output (MIMO) scheme that intrinsically amalgamates space–time spreading (STS) to achieve a diversity gain and a Vertical Bell Labs layered space–time (V-BLAST) scheme to attain a multiplexing gain in the context of generalized multicarrier direct-sequence code-division multiple access (MC DS-CDMA), as well as beamforming. Furthermore, the proposed system employs both time- and frequency-domain spreading to increase the number of users, which is also combined with a user-grouping technique to reduce the effects of multiuser interference

Near-capacity MIMOs using iterative detection

In this thesis, Multiple-Input Multiple-Output (MIMO) techniques designed for transmission over narrowband Rayleigh fading channels are investigated. Specifically, in order to providea diversity gain while eliminating the complexity of MIMO channel estimation, a Differential Space-Time Spreading (DSTS) scheme is designed that employs non-coherent detection. Additionally, in order to maximise the coding advantage of DSTS, it is combined with Sphere Packing (SP) modulation. The related capacity analysis shows that the DSTS-SP scheme exhibits a higher capacity than its counterpart dispensing with SP. Furthermore, in order to attain additional performance gains, the DSTS system invokes iterative detection, where the outer code is constituted by a Recursive Systematic Convolutional (RSC) code, while the inner code is a SP demapper in one of the prototype systems investigated, while the other scheme employs a Unity Rate Code (URC) as its inner code in order to eliminate the error floor exhibited by the system dispensing with URC. EXIT charts are used to analyse the convergence behaviour of the iteratively detected schemes and a novel technique is proposed for computing the maximum achievable rate of the system based on EXIT charts. Explicitly, the four-antenna-aided DSTSSP system employing no URC precoding attains a coding gain of 12 dB at a BER of 10-5 and performs within 1.82 dB from the maximum achievable rate limit. By contrast, the URC aidedprecoded system operates within 0.92 dB from the same limit.On the other hand, in order to maximise the DSTS system’s throughput, an adaptive DSTSSP scheme is proposed that exploits the advantages of differential encoding, iterative decoding as well as SP modulation. The achievable integrity and bit rate enhancements of the system are determined by the following factors: the specific MIMO configuration used for transmitting data from the four antennas, the spreading factor used and the RSC encoder’s code rate.Additionally, multi-functional MIMO techniques are designed to provide diversity gains, multiplexing gains and beamforming gains by combining the benefits of space-time codes, VBLASTand beamforming. First, a system employing Nt=4 transmit Antenna Arrays (AA) with LAA number of elements per AA and Nr=4 receive antennas is proposed, which is referred to as a Layered Steered Space-Time Code (LSSTC). Three iteratively detected near-capacity LSSTC-SP receiver structures are proposed, which differ in the number of inner iterations employed between the inner decoder and the SP demapper as well as in the choice of the outer code, which is either an RSC code or an Irregular Convolutional Code (IrCC). The three systems are capable of operating within 0.9, 0.4 and 0.6 dB from the maximum achievable rate limit of the system. A comparison between the three iteratively-detected schemes reveals that a carefully designed two-stage iterative detection scheme is capable of operating sufficiently close to capacity at a lower complexity, when compared to a three-stage system employing a RSC or a two-stage system using an IrCC as an outer code. On the other hand, in order to allow the LSSTC scheme to employ less receive antennas than transmit antennas, while still accommodating multiple users, a Layered Steered Space-Time Spreading (LSSTS) scheme is proposed that combines the benefits of space-time spreading, V-BLAST, beamforming and generalised MC DS-CDMA. Furthermore, iteratively detected LSSTS schemes are presented and an LLR post-processing technique is proposed in order to improve the attainable performance of the iteratively detected LSSTS system.Finally, a distributed turbo coding scheme is proposed that combines the benefits of turbo coding and cooperative communication, where iterative detection is employed by exchanging extrinsic information between the decoders of different single-antenna-aided users. Specifically, the effect of the errors induced in the first phase of cooperation, where the two users exchange their data, on the performance of the uplink in studied, while considering different fading channel characteristics

Signal Processing in Arrayed MIMO Systems

Multiple-Input Multiple-Output (MIMO) systems, using antenna arrays at both receiver and transmitter, have shown great potential to provide high bandwidth utilization efficiency. Unlike other reported research on MIMO systems which often assumes independent antennas, in this thesis an arrayed MIMO system framework is proposed, which provides a richer description of the channel charac- teristics and additional degrees of freedom in designing communication systems. Firstly, the spatial correlated MIMO system is studied as an array-to-array system with each array (Tx or Rx) having predefined constrained aperture. The MIMO system is completely characterized by its transmit and receive array man- ifolds and a new spatial correlation model other than Kronecker-based model is proposed. As this model is based on array manifolds, it enables the study of the effect of array geometry on the capacity of correlated MIMO channels. Secondly, to generalize the proposed arrayed MIMO model to a frequency selective fading scenario, the framework of uplink MIMO DS-CDMA (Direct- Sequence Code Division Multiple Access) systems is developed. DOD estimation is developed based on transmit beamrotation. A subspace-based joint DOA/TOA estimation scheme as well as various spatial temporal reception algorithms is also proposed. Finally, the downlink MIMO-CDMA systems in multiple-access multipath fading channels are investigated. Linear precoder and decoder optimization problems are studied under different criterions. Optimization approaches with different power allocation schemes are investigated. Sub-optimization approaches with close-form solution and thus less computation complexity are also proposed

Space time transceiver design over multipath fading channels

Imperial Users onl

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

On the performance and capacity of space-time block coded multicarrier CDMA communication systems

Ph.DDOCTOR OF PHILOSOPH

Design of a simulation platform to test next generation of terrestrial DVB

Digital Terrestrial Television Broadcasting (DTTB) is a member of our daily life routine, and nonetheless, according to new users’ necessities in the fields of communications and leisure, new challenges are coming up. Moreover, the current Standard is not able to satisfy all the potential requirements. For that reason, first of all, a review of the current Standard has been performed within this work. Then, it has been identified the needing of developing a new version of the standard, ready to support enhanced services, as for example broadcasting transmissions to moving terminals or High Definition Television (HDTV) transmissions, among others. The main objective of this project is the design and development of a physical layer simulator of the whole DVB-T standard, including both the complete transmission and reception procedures. The simulator has been developed in Matlab. A detailed description of the simulator both from a functional and an architectural point of view is included. The simulator is the base for testing any possible modifications that may be included into the DVB-T2 future standard. In fact, several proposed enhancements have already been carried out and their performance has been evaluated. Specifically, the use of higher order modulation schemes, and the corresponding modifications in all the system blocks, have been included and evaluated. Furthermore, the simulator will allow testing other enhancements as the use of more efficient encoders and interleavers, MIMO technologies, and so on. A complete set of numerical results showing the performance of the different parts of the system, are presented in order to validate the correctness of the implementation and to evaluate both the current standard performance and the proposed enhancements. This work has been performed within the context of a project called FURIA, which is a strategic research project funded by the Spanish Ministry of Industry, Tourism and Commerce. A brief description of this project and its consortium has been also included herein, together with an introduction to the current situation of the DTTB in Spain (called TDT in Spanish)