Design and Experiment of a Wheel Precision Seed-Metering Device with Cells for Corn

In this study, a wheel seed-metering device with cells for corn was built to enhance seed-metering performance and shorten the design cycle. The actual seed-metering process was analyzed and the three main factors influencing seed metering were obtained: rotational speed of the seed-metering device, hole diameter, and hole pitch. With the three factors as the test factors, and the QFI, MISS and MULT index as the test indexes, the multiple quadratic rotation orthogonal combination test was carried out. Using Design-Expert 8.0.6 to analyze the test data, the mathematical model between the test factors and the test index was obtained. The parameter optimization results indicate that optimal performance of the seed-metering device can be achieved under a rotational speed of 30.32 rpm, hole diameter of 13 mm, and hole pitch of 45 mm, qualification rate, miss-seeding rate, and reseeding rate were 94.99%, 1.93%, and 3.08%, respectively. Under the optimal parameter combination, the field test proved that the qualification rate, miss-seeding rate, and reseeding rate were 91.81%, 3.08%, and 5.11%, respectively. The test results were close to the optimization results, which could show the agronomic requirements of the precision sowing of maize

Design and Optimization of the Vertical Plate Metering Device for Alfalfa Seeds Precision Based on Engineering Discrete Element Method (EDEM)

The research is financed by China Agriculture Research System (CARS34) Abstract The vertical plate seed metering device enhancement and constraints mass flow rate when added to the device improve mass flow performance of alfalfa vertical plate device. Alfalfa forage crop is a potential feeding nutrient and the backbone of dairy production success in China. Engineering discrete element method EDEM was adopted for simulation computing and analysis of the seed-filling performance of the vertical plate metering device with three cell shapes under desired rotational speeds. The results showed significant differences at P< 0.05 of seed filing performance in relation to the rotational speed and cell shapes. Triangular cell shape had indicated the lower mass flow at 8x10-5 kg/s compared to the V-shape of 12x10-4 kg/s and U-shape of 8x10-3 kg/s, 20 to 30% reduction, respectively. The rotational velocity of the vertical plate exceeded 30rpm the cell units reach the optimum seed filling efficiency resulted in 30% decrease of the mass flow rate, the results indicated more seeds disturbance, reduces seed filling by enhancing seeds accessibility and falling, from cells. Furthermore, the T-shape had a lower seed filling and higher seeds releasing in comparison to the V-shape and U-shape cells. The lower seed filling found to be the higher filling efficiency while the higher seed filling leads to the lower filling efficiency. Keywords: Alfalfa seed model, cell, filling performance, mass flow, simulation EDE

Agricultural Structures and Mechanization

In our globalized world, the need to produce quality and safe food has increased exponentially in recent decades to meet the growing demands of the world population. This expectation is being met by acting at multiple levels, but mainly through the introduction of new technologies in the agricultural and agri-food sectors. In this context, agricultural, livestock, agro-industrial buildings, and agrarian infrastructure are being built on the basis of a sophisticated design that integrates environmental, landscape, and occupational safety, new construction materials, new facilities, and mechanization with state-of-the-art automatic systems, using calculation models and computer programs. It is necessary to promote research and dissemination of results in the field of mechanization and agricultural structures, specifically with regard to farm building and rural landscape, land and water use and environment, power and machinery, information systems and precision farming, processing and post-harvest technology and logistics, energy and non-food production technology, systems engineering and management, and fruit and vegetable cultivation systems. This Special Issue focuses on the role that mechanization and agricultural structures play in the production of high-quality food and continuously over time. For this reason, it publishes highly interdisciplinary quality studies from disparate research fields including agriculture, engineering design, calculation and modeling, landscaping, environmentalism, and even ergonomics and occupational risk prevention

Proceedings of the European Conference on Agricultural Engineering AgEng2021

This proceedings book results from the AgEng2021 Agricultural Engineering Conference under auspices of the European Society of Agricultural Engineers, held in an online format based on the University of Évora, Portugal, from 4 to 8 July 2021. This book contains the full papers of a selection of abstracts that were the base for the oral presentations and posters presented at the conference. Presentations were distributed in eleven thematic areas: Artificial Intelligence, data processing and management; Automation, robotics and sensor technology; Circular Economy; Education and Rural development; Energy and bioenergy; Integrated and sustainable Farming systems; New application technologies and mechanisation; Post-harvest technologies; Smart farming / Precision agriculture; Soil, land and water engineering; Sustainable production in Farm buildings

Modelling, Monitoring, Control and Optimization for Complex Industrial Processes

This reprint includes 22 research papers and an editorial, collected from the Special Issue "Modelling, Monitoring, Control and Optimization for Complex Industrial Processes", highlighting recent research advances and emerging research directions in complex industrial processes. This reprint aims to promote the research field and benefit the readers from both academic communities and industrial sectors

Towards COP27: The Water-Food-Energy Nexus in a Changing Climate in the Middle East and North Africa

Due to its low adaptability to climate change, the MENA region has become a "hot spot". Water scarcity, extreme heat, drought, and crop failure will worsen as the region becomes more urbanized and industrialized. Both water and food scarcity are made worse by civil wars, terrorism, and political and social unrest. It is unclear how climate change will affect the MENA water–food–energy nexus. All of these concerns need to be empirically evaluated and quantified for a full climate change assessment in the region. Policymakers in the MENA region need to be aware of this interconnection between population growth, rapid urbanization, food safety, climate change, and the global goal of lowering greenhouse gas emissions (as planned in COP27). Researchers from a wide range of disciplines have come together in this SI to investigate the connections between water, food, energy, and climate in the region. By assessing the impacts of climate change on hydrological processes, natural disasters, water supply, energy production and demand, and environmental impacts in the region, this SI will aid in implementation of sustainable solutions to these challenges across multiple spatial scales

ECOS 2012

The 8-volume set contains the Proceedings of the 25th ECOS 2012 International Conference, Perugia, Italy, June 26th to June 29th, 2012. ECOS is an acronym for Efficiency, Cost, Optimization and Simulation (of energy conversion systems and processes), summarizing the topics covered in ECOS: Thermodynamics, Heat and Mass Transfer, Exergy and Second Law Analysis, Process Integration and Heat Exchanger Networks, Fluid Dynamics and Power Plant Components, Fuel Cells, Simulation of Energy Conversion Systems, Renewable Energies, Thermo-Economic Analysis and Optimisation, Combustion, Chemical Reactors, Carbon Capture and Sequestration, Building/Urban/Complex Energy Systems, Water Desalination and Use of Water Resources, Energy Systems- Environmental and Sustainability Issues, System Operation/ Control/Diagnosis and Prognosis, Industrial Ecology

Atti del XXXV Convegno Nazionale di Idraulica e Costruzioni Idrauliche

La XXXV edizione del Convegno Nazionale di Idraulica e Costruzioni Idrauliche (IDRA16), co-organizzata dal Gruppo Italiano di Idraulica (GII) e dal Dipartimento di Ingegneria Civile, Chimica, Ambientale, e dei Materiali (DICAM) dell’Alma Mater Studiorum - Università di Bologna, si è svolta a Bologna dal 14 al 16 settembre 2016. Il Convegno Nazionale è tornato pertanto ad affacciarsi all’ombra del “Nettuno”, dopo l’edizione del 1982 (XVIII edizione). Il titolo della XXXV edizione, “Ambiente, Risorse, Energia: le sfide dell’Ingegneria delle acque in un mondo che cambia”, sottolinea l’importanza e la complessità delle tematiche che rivestono la sfera dello studio e del governo delle risorse idriche. Le sempre più profonde interconnessioni tra risorse idriche, sviluppo economico e benessere sociale, infatti, spronano sia l’Accademia che l’intera comunità tecnico-scientifica nazionale ed internazionale all’identificazione ed alla messa in atto di strategie di gestione innovative ed ottimali: sfide percepite quanto mai necessarie in un contesto ambientale in continua evoluzione, come quello in cui viviamo. La XXXV edizione del Convegno di Idraulica e Costruzioni Idrauliche, pertanto, si è posta come punto d’incontro della comunità tecnico-scientifica italiana per la discussione a tutto tondo di tali problematiche, offrendo un programma scientifico particolarmente ricco e articolato, che ha coperto tutti gli ambiti riconducibili all’Ingegneria delle Acque. L’apertura dei lavori del Convegno si è svolta nella storica cornice della Chiesa di Santa Cristina, uno dei luoghi più caratteristici e belli della città ed oggi luogo privilegiato per l’ascolto della musica classica, mentre le attività di presentazione e discussione scientifica si sono svolte principalmente presso la sede della Scuola di Ingegneria e Architettura dell’Università di Bologna sita in Via Terracini. Il presente volume digitale ad accesso libero (licenza Creative Commons 4.0) raccoglie le memorie brevi pervenute al Comitato Scientifico di IDRA16 ed accettate per la presentazione al convegno a valle di un processo di revisione tra pari. Il volume articola dette memorie in sette macro-tematiche, che costituiscono i capitoli del volume stesso: I. meccanica dei fluidi; II. ambiente marittimo e costiero; III. criteri, metodi e modelli per l’analisi dei processi idrologici e la gestione delle acque; IV. gestione e tutela dei corpi idrici e degli ecosistemi; V. valutazione e mitigazione del rischio idrologico e idraulico; VI. dinamiche acqua-società: sviluppo sostenibile e gestione del territorio; VII. monitoraggio, open-data e software libero. Ciascuna macro-tematica raggruppa più sessioni specialistiche autonome sviluppatesi in parallelo durante le giornate del Convegno, i cui titoli vengono richiamati all’interno del presente volume. La vastità e la diversità delle tematiche affrontate, che ben rappresentano la complessità delle numerose sfide dell’Ingegneria delle Acque, appaiono evidenti dalla consultazione dell’insieme di memorie brevi presentate. La convinta partecipazione della Comunità Scientifica Italiana è dimostrata dalle oltre 350 memorie brevi, distribuite in maniera pressoché uniforme tra le sette macro-tematiche di riferimento. Dette memorie sono sommari estesi di lunghezza variabile redatti in lingua italiana, o inglese. In particolare, la possibilità di stesura in inglese è stata concessa con l’auspicio di portare la visibilità del lavoro presentato ad un livello sovranazionale, grazie alla pubblicazione open access del volume degli Atti del Convegno. Il volume si divide in tre parti: la parte iniziale è dedicata alla presentazione del volume ed all’indice generale dei contributi divisi per macro-tematiche; la parte centrale raccoglie le memorie brevi; la terza parte riporta l’indice analitico degli Autori, che chiude il volume