Engineering estimates for supersonic flutter of curved shell segments

Engineering estimates for supersonic flutter of curved shell panel

The conformal mapping of the interior of the unit circle onto the interior of a class of smooth curves

Outer and inner curved plates and shell shapes optimized by conformal mappin

Water impact analysis of space shuttle solid rocket motor by the finite element method

Preliminary analysis showed that the doubly curved triangular shell elements were too stiff for these shell structures. The doubly curved quadrilateral shell elements were found to give much improved results. A total of six load cases were analyzed in this study. The load cases were either those resulting from a static test using reaction straps to simulate the drop conditions or under assumed hydrodynamic conditions resulting from a drop test. The latter hydrodynamic conditions were obtained through an emperical fit of available data. Results obtained from a linear analysis were found to be consistent with results obtained elsewhere with NASTRAN and BOSOR. The nonlinear analysis showed that the originally assumed loads would result in failure of the shell structures. The nonlinear analysis also showed that it was useful to apply internal pressure as a stabilizing influence on collapse. A final analysis with an updated estimate of load conditions resulted in linear behavior up to full load

Application of piezoelectric macro-fiber-composite actuators to the suppression of noise transmission through curved glass plates

This paper analyzes the possibility of increasing the acoustic transmission loss of sound transmitted through planar or curved glass shells using attached piezoelectric macro fiber composite (MFC) actuators shunted by active circuits with a negative capacitance. The key features that control the sound transmission through the curved glass shells are analyzed using an analytical approximative model. A detailed analysis of the particular arrangement of MFC actuators on the glass shell is performed using a finite element method (FEM) model. The FEM model takes into account the effect of a flexible frame that clamps the glass shell at its edges. A method is presented for the active control of the Young's modulus and the bending stiffness coefficient of the composite sandwich structure that consists of a glass plate and the attached piezoelectric MFC actuator. The predictions of the acoustic transmission loss frequency dependencies obtained by the FEM model are compared with experimental data. The results indicate that it is possible to increase the acoustic transmission loss by 20 and 25 dB at the frequencies of the first and second resonant modes of the planar and curved glass shells, respectively, using the effect of the shunt circuit with a negative capacitance.Comment: Final proof-edited versio

Vortices on a superconducting nanoshell: phase diagram and dynamics

In superconductors, the search for special vortex states such as giant vortices focuses on laterally confined or nanopatterned thin superconducting films, disks, rings, or polygons. We examine the possibility to realize giant vortex states and states with non-uniform vorticity on a superconducting spherical nanoshell, due to the interplay of the topology and the applied magnetic field. We derive the phase diagram and identify where, as a function of the applied magnetic field, the shell thickness and the shell radius, these different vortex phases occur. Moreover, the curved geometry allows these states (or a vortex lattice) to coexist with a Meissner state, on the same curved film. We have examined the dynamics of the decay of giant vortices or states with non-uniform vorticity into a vortex lattice, when the magnetic field is adapted so that a phase boundary is crossed.Comment: 21 pages, 9 figure

All-glass shell scale models made with an adjustable mould

Ever since Lucio Blandini developed a doubly curved synclastic shell with adhesively bonded glass components, the concept of building a self-supporting glass-only shell has almost become within reach. In the current contribution a small-scaled experimental concept is presented of a self-supporting anticlastic all-glass shell scale model, created by means of an adaptable mould. First, different manufacturing parameters of relatively small shells are investigated, such as mould type, glass supporting system and dimensions, oven temperature and shell curvature. Next, an adjustable mould for the bending of glass is developed, built and tested. With this mould it is possible to make glass panels synclastic and anticlastic in a great variety of forms. With this new moulding technique we were able to create different prototypes. They are forming the basis an intended larger shell, composed of smaller segments. The objective is to join the latter by using fusing techniques, which result is completely transparent monolithic all-glass shells. Therefore, additional experiments have been performed to explore different variants of glass fusion techniques to be applied for double curved glass shells

Magic structures of helical multi-shell zirconium nanowires

The structures of free-standing zirconium nanowires with 0.6$-$2.8 nm in diameter are systematically studied by using genetic algorithm simulations with a tight-binding many body potential. Several multi-shell growth sequences with cylindrical structures are obtained. These multi-shell structures are composed of coaxial atomic shells with the three- and four-strands helical, centered pentagonal and hexagonal, and parallel double-chain-core curved surface epitaxy. Under the same growth sequence, the numbers of atomic strands in inner- and outer-shell show even-odd coupling and usually differ by five. The size and structure dependence of angular correlation functions and vibrational properties of zirconium nanowire are also discussed.Comment: 14 pages, 4 figure