Multilevel Converters: An Enabling Technology for High-Power Applications

| Multilevel converters are considered today as the state-of-the-art power-conversion systems for high-power and power-quality demanding applications. This paper presents a tutorial on this technology, covering the operating principle and the different power circuit topologies, modulation methods, technical issues and industry applications. Special attention is given to established technology already found in industry with more in-depth and self-contained information, while recent advances and state-of-the-art contributions are addressed with useful references. This paper serves as an introduction to the subject for the not-familiarized reader, as well as an update or reference for academics and practicing engineers working in the field of industrial and power electronics.Ministerio de Ciencia y Tecnología DPI2001-3089Ministerio de Eduación y Ciencia d TEC2006-0386

Advanced control of grid-connected multilevel power electronic rectifiers

Multilevel power electronic converters have been gaining attention due to their ability to supply high amounts of power and to handle high voltage levels. In this dissertation, grid connected AC-DC rectifier application is investigated with different topologies and control scheme. At first, neutral point clamped (NPC) rectifier is employed to transfer power from the grid to the load. The NPC rectifier has two capacitors in order to build multilevel output voltage. However, it causes voltage unbalancing problem. Therefore, the new method has been proposed to regulate each capacitor voltage at the same voltage level. Experimental results show that it is effective to balance capacitor voltages of the NPC and it can improve total harmonic distortion (THD) of the grid current as a result. Furthermore, 7 voltage levels can be achieved by using hybrid multilevel rectifier which consists of an NPC and cascaded H-bridges (CHB). Because the hybrid multilevel rectifier has total 8 capacitors which are completely discharged at first, large inrush currents from the grid might cause hazards. Therefore, the paper develops a pre-charge routine for building it up to steady state operation in which unity power factor control (PFC) and load voltage control are achieved. Finally, multiple reference frame theory (MRF) is used to improve THD of the grid currents when the hybrid multilevel rectifier is connected with distorted grid voltage source. After calculating 5th harmonic of the grid current in real time, the voltage reference for the hybrid multilevel rectifier will be compensated in a feedback loop. Experimental results show validity in improving THD of the grid currents. --Abstract, page iv

The Essential Role and the Continuous Evolution of Modulation Techniques for Voltage-Source Inverters in the Past, Present, and Future Power Electronics

The cost reduction of power-electronic devices, the increase in their reliability, efficiency, and power capability, and lower development times, together with more demanding application requirements, has driven the development of several new inverter topologies recently introduced in the industry, particularly medium-voltage converters. New more complex inverter topologies and new application fields come along with additional control challenges, such as voltage imbalances, power-quality issues, higher efficiency needs, and fault-tolerant operation, which necessarily requires the parallel development of modulation schemes. Therefore, recently, there have been significant advances in the field of modulation of dc/ac converters, which conceptually has been dominated during the last several decades almost exclusively by classic pulse-width modulation (PWM) methods. This paper aims to concentrate and discuss the latest developments on this exciting technology, to provide insight on where the state-of-the-art stands today, and analyze the trends and challenges driving its future

High-performance motor drives

This article reviews the present state and trends in the development of key parts of controlled induction motor drive systems: converter topologies, modulation methods, as well as control and estimation techniques. Two- and multilevel voltage-source converters, current-source converters, and direct converters are described. The main part of all the produced electric energy is used to feed electric motors, and the conversion of electrical power into mechanical power involves motors ranges from less than 1 W up to several dozen megawatts

Comparative Analysis of Multilevel Converters for Medium-Voltage Applications

The electric energy demand has been steadily growing during the last century, and all forecasts indicate that it will keep growing in the following years. Within this frame, and due to all the problems that this demand increase generate in the environment, it is necessary improving the current techniques of electric energy conversion and transmission in order to increase the whole system efficiency. On the other hand, it is also necessary increasing the renewable energy resources exploitation through more efficient generation systems. According to these lines, the power electronics systems that have been installed in the last decades allowed to obtain better efficiency from the renewable natural resources like the wind or the solar power. These systems have also notably improved the quality of the power supplied, reducing the losses through what are known as power quality applications. Power converters are currently essential in any power electronics system. Within them, the multilevel converters specially suppose a breakthrough compared with the classical two level converters, as they allow obtaining voltage and current signals with lower harmonic content, what means fewer losses in high power medium voltage applications. In this Thesis a comparative study of some multilevel converter topologies normally used in high power medium voltage applications is done. The objective is analyzing in detail each topology and comparing it with the rest following different criteria, with the aim to know the advantages and drawbacks of each one and to realize which one is more suitable for each application

THD Analysis of a Seven, Nine, and Eleven Level Cascaded H-Bridge Multilevel Inverter for Different Loads

A multilevel inverter is implemented for generating the required staircase AC voltage of output from various steps of voltages of DC sources. The multilevel inverter gives a better harmonic spectrum and a compatible quality of output. This article delves into an analytical analysis of the total harmonic distortion (THD) of different multilevel inverters which employ a multicarrier PWM technique. This technique is implemented for operating the switches at their respective angle of conduction. This paper deals with various cascaded H-Bridge multilevel inverters (CMI) with various loads that are modelled by implementing the MATLAB/Simulink platform. The output gives a better result of the proposed model in terms that it is helpful towards reducing the THD and the losses of switching

Multilevel high power converters for reversible power flow between utilities and power pool transmission corridor

Abstract: Multilevel converters have emerged as the state of the art high power conversion for applications in reversible power flow. Electric power could be tapped from or injected to the grid regardless of the discrepancies in voltage levels, frequency, phase number and different modes of operation of the grid and the system. This paper presents an overview of different topologies of multilevel converters and modulation strategies with a verification of back-to-back neutral point converter for bidirectional power flow applicatio

Addressing control and capacitor voltage regulation challenges in multilevel power electronic converters

Multilevel power electronic converters are the current industry solutions for applications that demand medium voltage, reasonable efficiency, and high power quality. The proper operation of these types of power converters requires special control, modulation methods, and capacitor voltage regulation techniques. Both developing capacitor voltage regulation methods and addressing their associated issues with such fall within the primary focus of this dissertation. In this dissertation an investigation was conducted on the capacitor voltage regulation constraints in cascaded H-bridge multilevel converters with a staircase output voltage waveform. In the proposed method, the harmonic elimination technique is used to determine the switching angles. A constraint was then derived to identify modulation those indices that lead to voltage regulation of the capacitor. This constraint can be used in optimization problems for harmonic minimization to guarantee capacitor voltage regulation in these types of converters. Furthermore, a capacitor voltage regulation method was developed using redundant state selection for a flying capacitor active rectifier. This method reduces the number of switching instances by using both online and offline state selection procedure. Additionally, a start-up procedure is proposed that pre-charges the all of capacitors in the rectifier to both avoid overstressing the switches and obtain a smoother start-up. Finally, a flexible capacitor voltage regulation method is proposed that provides the ability to control the voltage of the capacitors in both cascaded H-bridge and hybrid multilevel converters. In this method, the capacitor voltage in each individual H-bridge cell is independently regulated by controlling the active power of each cell

The Age of Multilevel Converters Arrives

This work is devoted to review and analyze the most relevant characteristics of multilevel converters, to motivate possible solutions, and to show that we are in a decisive instant in which energy companies have to bet on these converters as a good solution compared with classic two-level converters. This article presents a brief overview of the actual applications of multilevel converters and provides an introduction of the modeling techniques and the most common modulation strategies. It also addresses the operational and technological issues