Collaborative Spectrum Sensing from Sparse Observations in Cognitive Radio Networks

Spectrum sensing, which aims at detecting spectrum holes, is the precondition for the implementation of cognitive radio (CR). Collaborative spectrum sensing among the cognitive radio nodes is expected to improve the ability of checking complete spectrum usage. Due to hardware limitations, each cognitive radio node can only sense a relatively narrow band of radio spectrum. Consequently, the available channel sensing information is far from being sufficient for precisely recognizing the wide range of unoccupied channels. Aiming at breaking this bottleneck, we propose to apply matrix completion and joint sparsity recovery to reduce sensing and transmitting requirements and improve sensing results. Specifically, equipped with a frequency selective filter, each cognitive radio node senses linear combinations of multiple channel information and reports them to the fusion center, where occupied channels are then decoded from the reports by using novel matrix completion and joint sparsity recovery algorithms. As a result, the number of reports sent from the CRs to the fusion center is significantly reduced. We propose two decoding approaches, one based on matrix completion and the other based on joint sparsity recovery, both of which allow exact recovery from incomplete reports. The numerical results validate the effectiveness and robustness of our approaches. In particular, in small-scale networks, the matrix completion approach achieves exact channel detection with a number of samples no more than 50% of the number of channels in the network, while joint sparsity recovery achieves similar performance in large-scale networks.Comment: 12 pages, 11 figure

Adaptive quantization for spectrum exchange information in mobile cognitive radio networks

To reduce the detection failure of the exchanging signal power onto the OFDM subcarrier signal at uniform quantization, dynamic subcarrier mapping is applied. Moreover, to addressing low SNR’s wall-less than pre-determine threshold, non-uniform quantization or adaptive quantization for the signal quantization size parameter is proposed. μ-law is adopted for adaptive quantization subcarrier mapping which is deployed in mobility environment, such as Doppler Effect and Rayleigh Fading propagation. In this works, sensing node received signal power then sampled into a different polarity positive and negative in μ-law quantization and divided into several segmentation levels. Each segmentation levels are divided into several sub-segment has representing one tone signal subcarrier number OFDM which has the number of quantization level and the width power. The results show that by using both methods, a significant difference is obtained around 8 dB compared to those not using the adaptive method

Software Defined Radio Design for OFDM Based Spectrum Exchange Information Using Arduino UNO and X-Bee

A cost expenditure of software defined radio software has limiting the development of cognitive radio in third countries. Moreover, a complexity of signal processing library in a SDR platform has contributed to the hard implementation in real applications. In this works, the development of SDR platform with low cost expenditure is proposed. Arduino UNO and X Bee uses for the OFDM based spectrum exchange information. In a case of spectrum sensing scenario, the objective of the local spectrum sensing is to detect the PU’s signal detection. The performance of SN ability to sense the PU’s signal is crucial. It was shown that from the previous works as the detected power is quantized into information bit is simulated.  In  order  to  implemented  the  spectrum exchange  information during  sensing,  Arduino  UNO  and  X  Bee  is implemented to sense the presence of PU activity channels of wifi terminals based on the energy of the signals. The detected power (RSSI) of wifi terminals is exchanged into an OFDM subcarrier tone signal such as orthogonal sub-channel that being equally divided from the licensed band.   The results shows that using proposed software defined radio (SDR) based on Arduino and X Bee, the cognitive radio spectrum sensing is applied. The received power from the PU’s channels such as wifi networks can be detected as well. The system could received and exchanged into OFDM-based subcarrier information bits

Markov Decision Processes with Applications in Wireless Sensor Networks: A Survey

Wireless sensor networks (WSNs) consist of autonomous and resource-limited devices. The devices cooperate to monitor one or more physical phenomena within an area of interest. WSNs operate as stochastic systems because of randomness in the monitored environments. For long service time and low maintenance cost, WSNs require adaptive and robust methods to address data exchange, topology formulation, resource and power optimization, sensing coverage and object detection, and security challenges. In these problems, sensor nodes are to make optimized decisions from a set of accessible strategies to achieve design goals. This survey reviews numerous applications of the Markov decision process (MDP) framework, a powerful decision-making tool to develop adaptive algorithms and protocols for WSNs. Furthermore, various solution methods are discussed and compared to serve as a guide for using MDPs in WSNs

Spatial Diversity Impact in Mobile Quantisation Mapping for Cognitive Radio Networks

Mobile environment especially spatial diversity in spectrum exchange information in cognitive radio networks is an interesting topic for further investigation. Most of the cognitive radio researchers does not consider the spatial diversity of sensing nodes. However, the mobility of the SNs within PU’s coverage area is heavily influencing the detection performance on local observation of energy signals. The movement of the SNs creates spatial diversity in the observation of the PU’s signal. Due to the movement, spatial distance, velocity, Doppler Effect and geo-location information, the signals condition would fluctuate during the sensing process. Spatial diversity also reduces the average received signal strength and must be compensated by detection signal method which appropriate with the signal conditions.  Therefore, it is need to find a comprehensive solution to overcome the effects of spatial diversity. Moreover, this research could give a clearly analysis in spectrum exchange information regarding detection performance for cognitive radio networks. Finally, the cooperation overhead due to spatial diversity effects in master node station could reduce and increased the detection performance of PU’s spectrum hole channels

Spectrum Map and its Application in Cognitive Radio Networks

Recent measurements on radio spectrum usage have revealed the abundance of underutilized bands of spectrum that belong to licensed users. This necessitated the paradigm shift from static to dynamic spectrum access. Cognitive radio based secondary networks that utilize such unused spectrum holes in the licensed band, have been proposed as a possible solution to the spectrum crisis. The idea is to detect times when a particular licensed band is unused and use it for transmission without causing interference to the licensed user. We argue that prior knowledge about occupancy of such bands and the corresponding achievable performance metrics can potentially help secondary networks to devise effective strategies to improve utilization. In this work, we use Shepard\u27s method of interpolation to create a spectrum map that provides a spatial distribution of spectrum usage over a region of interest. It is achieved by intelligently fusing the spectrum usage reports shared by the secondary nodes at various locations. The obtained spectrum map is a continuous and differentiable 2-dimension distribution function in space. With the spectrum usage distribution known, we show how different radio spectrum and network performance metrics like channel capacity, secondary network throughput, spectral efficiency, and bit error rate can be estimated. We show the applicability of the spectrum map in solving the intra-cell channel allocation problem in centralized cognitive radio networks, such as IEEE 802.22. We propose a channel allocation scheme where the base station allocates interference free channels to the consumer premise equipments (CPE) using the spectrum map that it creates by fusing the spectrum usage information shared by some CPEs. The most suitable CPEs for information sharing are chosen on a dynamic basis using an iterative clustering algorithm. Next, we present a contention based media access control (MAC) protocol for distributed cognitive radio network. The unlicensed secondary users contend among themselves over a common control channel. Winners of the contention get to access the available channels ensuring high utilization and minimum collision with primary incumbent. Last, we propose a multi-channel, multi-hop routing protocol with secondary transmission power control. The spectrum map, created and maintained by a set of sensors, acts as the basis of finding the best route for every source destination pair. The proposed routing protocol ensures primary receiver protection and maximizes achievable link capacity. Through simulation experiments we show the correctness of the prediction model and how it can be used by secondary networks for strategic positioning of secondary transmitter-receiver pairs and selecting the best candidate channels. The simulation model mimics realistic distribution of TV stations for urban and non-urban areas. Results validate the nature and accuracy of estimation, prediction of performance metrics, and efficiency of the allocation process in an IEEE 802.22 network. Results for the proposed MAC protocol show high channel utilization with primary quality of service degradation within a tolerable limit. Performance evaluation of the proposed routing scheme reveals that it ensures primary receiver protection through secondary power control and maximizes route capacity