Reliability-based economic model predictive control for generalized flow-based networks including actuators' health-aware capabilities

This paper proposes a reliability-based economic model predictive control (MPC) strategy for the management of generalized flow-based networks, integrating some ideas on network service reliability, dynamic safety stock planning, and degradation of equipment health. The proposed strategy is based on a single-layer economic optimisation problem with dynamic constraints, which includes two enhancements with respect to existing approaches. The first enhancement considers chance-constraint programming to compute an optimal inventory replenishment policy based on a desired risk acceptability level, leading to dynamically allocate safety stocks in flow-based networks to satisfy non-stationary flow demands. The second enhancement computes a smart distribution of the control effort and maximises actuators’ availability by estimating their degradation and reliability. The proposed approach is illustrated with an application of water transport networks using the Barcelona network as the considered case study.Peer ReviewedPostprint (author's final draft

An improved multi-parametric programming algorithm for flux balance analysis of metabolic networks

Flux balance analysis has proven an effective tool for analyzing metabolic networks. In flux balance analysis, reaction rates and optimal pathways are ascertained by solving a linear program, in which the growth rate is maximized subject to mass-balance constraints. A variety of cell functions in response to environmental stimuli can be quantified using flux balance analysis by parameterizing the linear program with respect to extracellular conditions. However, for most large, genome-scale metabolic networks of practical interest, the resulting parametric problem has multiple and highly degenerate optimal solutions, which are computationally challenging to handle. An improved multi-parametric programming algorithm based on active-set methods is introduced in this paper to overcome these computational difficulties. Degeneracy and multiplicity are handled, respectively, by introducing generalized inverses and auxiliary objective functions into the formulation of the optimality conditions. These improvements are especially effective for metabolic networks because their stoichiometry matrices are generally sparse; thus, fast and efficient algorithms from sparse linear algebra can be leveraged to compute generalized inverses and null-space bases. We illustrate the application of our algorithm to flux balance analysis of metabolic networks by studying a reduced metabolic model of Corynebacterium glutamicum and a genome-scale model of Escherichia coli. We then demonstrate how the critical regions resulting from these studies can be associated with optimal metabolic modes and discuss the physical relevance of optimal pathways arising from various auxiliary objective functions. Achieving more than five-fold improvement in computational speed over existing multi-parametric programming tools, the proposed algorithm proves promising in handling genome-scale metabolic models.Comment: Accepted in J. Optim. Theory Appl. First draft was submitted on August 4th, 201

Design Optimization Utilizing Dynamic Substructuring and Artificial Intelligence Techniques

In mechanical and structural systems, resonance may cause large strains and stresses which can lead to the failure of the system. Since it is often not possible to change the frequency content of the external load excitation, the phenomenon can only be avoided by updating the design of the structure. In this paper, a design optimization strategy based on the integration of the Component Mode Synthesis (CMS) method with numerical optimization techniques is presented. For reasons of numerical efficiency, a Finite Element (FE) model is represented by a surrogate model which is a function of the design parameters. The surrogate model is obtained in four steps: First, the reduced FE models of the components are derived using the CMS method. Then the components are aassembled to obtain the entire structural response. Afterwards the dynamic behavior is determined for a number of design parameter settings. Finally, the surrogate model representing the dynamic behavior is obtained. In this research, the surrogate model is determined using the Backpropagation Neural Networks which is then optimized using the Genetic Algorithms and Sequential Quadratic Programming method. The application of the introduced techniques is demonstrated on a simple test problem

Distributed multilevel optimization for complex structures

Optimization problems concerning complex structures with many design variables may entail an unacceptable computational cost. This problem can be reduced considerably with a multilevel approach: A structure consisting of several components is optimized as a whole (global) as well as on the component level. In this paper, an optimization method is discussed with applications in the assessment of the impact of new design considerations in the development of a structure. A strategy based on fully stressed design is applied for optimization problems in linear statics. A global model is used to calculate the interactions (e.g., loads) for each of the components. These components are then optimized using the prescribed interactions, followed by a new global calculation to update the interactions. Mixed discrete and continuous design variables as well as different design configurations are possible. An application of this strategy is presented in the form of the full optimization of a vertical tail plane center box of a generic large passenger aircraft. In linear dynamics, the parametrization of the component interactions is problematic due to the frequency dependence. Hence, a modified method is presented in which the speed of component mode synthesis is used to avoid this parametrization. This method is applied to a simple test case that originates from noise control. \u

Fast emergency paths schema to overcome transient link failures in ospf routing

A reliable network infrastructure must be able to sustain traffic flows, even when a failure occurs and changes the network topology. During the occurrence of a failure, routing protocols, like OSPF, take from hundreds of milliseconds to various seconds in order to converge. During this convergence period, packets might traverse a longer path or even a loop. An even worse transient behaviour is that packets are dropped even though destinations are reachable. In this context, this paper describes a proactive fast rerouting approach, named Fast Emergency Paths Schema (FEP-S), to overcome problems originating from transient link failures in OSPF routing. Extensive experiments were done using several network topologies with different dimensionality degrees. Results show that the recovery paths, obtained by FEPS, are shorter than those from other rerouting approaches and can improve the network reliability by reducing the packet loss rate during the routing protocols convergence caused by a failure.Comment: 18 page

Creating awareness of kinaesthetic learning using the Experience API: current practices, emerging challenges, possible solutions

We describe our use of the Experience API in preparing blue-collar workers for three frequently arising work contexts, including, for example, the requirement to perform maintenance tasks exactly as specified, consistently, quickly, and without error. We provide some theoretical underpinning for modifying and updating the API to remain useful in near-future training scenarios, such as having a shorter time allowed for kinaesthetic learning experiences than in traditional apprenticeships or training. We propose ways to involve a wide range of stakeholders in appraising the API and ensuring that any enhancements to it, or add-ons, are useful, feasible and compatible with current TEL practices and tools, such as learning-design modelling languages