11,744 research outputs found
Past, Present, and Future of Simultaneous Localization And Mapping: Towards the Robust-Perception Age
Simultaneous Localization and Mapping (SLAM)consists in the concurrent
construction of a model of the environment (the map), and the estimation of the
state of the robot moving within it. The SLAM community has made astonishing
progress over the last 30 years, enabling large-scale real-world applications,
and witnessing a steady transition of this technology to industry. We survey
the current state of SLAM. We start by presenting what is now the de-facto
standard formulation for SLAM. We then review related work, covering a broad
set of topics including robustness and scalability in long-term mapping, metric
and semantic representations for mapping, theoretical performance guarantees,
active SLAM and exploration, and other new frontiers. This paper simultaneously
serves as a position paper and tutorial to those who are users of SLAM. By
looking at the published research with a critical eye, we delineate open
challenges and new research issues, that still deserve careful scientific
investigation. The paper also contains the authors' take on two questions that
often animate discussions during robotics conferences: Do robots need SLAM? and
Is SLAM solved
Robots for Exploration, Digital Preservation and Visualization of Archeological Sites
Monitoring and conservation of archaeological sites
are important activities necessary to prevent damage or to
perform restoration on cultural heritage. Standard techniques,
like mapping and digitizing, are typically used to document the
status of such sites. While these task are normally accomplished
manually by humans, this is not possible when dealing with
hard-to-access areas. For example, due to the possibility of
structural collapses, underground tunnels like catacombs are
considered highly unstable environments. Moreover, they are full
of radioactive gas radon that limits the presence of people only
for few minutes. The progress recently made in the artificial
intelligence and robotics field opened new possibilities for mobile
robots to be used in locations where humans are not allowed
to enter. The ROVINA project aims at developing autonomous
mobile robots to make faster, cheaper and safer the monitoring of
archaeological sites. ROVINA will be evaluated on the catacombs
of Priscilla (in Rome) and S. Gennaro (in Naples)
Navigace mobilních robotů v neznámém prostředí s využitím měření vzdáleností
The ability of a robot to navigate itself in the environment is a crucial step towards its autonomy. Navigation as a subtask of the development of autonomous robots is the subject of this thesis, focusing on the development of a method for simultaneous localization an mapping (SLAM) of mobile robots in six degrees of freedom (DOF). As a part of this research, a platform for 3D range data acquisition based on a continuously inclined laser rangefinder was developed. This platform is presented, evaluating the measurements and also presenting the robotic equipment on which the platform can be fitted. The localization and mapping task is equal to the registration of multiple 3D images into a common frame of reference. For this purpose, a method based on the Iterative Closest Point (ICP) algorithm was developed. First, the originally implemented SLAM method is presented, focusing on the time-wise performance and the registration quality issues introduced by the implemented algorithms. In order to accelerate and improve the quality of the time-demanding 6DOF image registration, an extended method was developed. The major extension is the introduction of a factorized registration, extracting 2D representations of vertical objects called leveled maps from the 3D point sets, ensuring these representations are 3DOF invariant. The extracted representations are registered in 3DOF using ICP algorithm, allowing pre-alignment of the 3D data for the subsequent robust 6DOF ICP based registration. The extended method is presented, showing all important modifications to the original method. The developed registration method was evaluated using real 3D data acquired in different indoor environments, examining the benefits of the factorization and other extensions as well as the performance of the original ICP based method. The factorization gives promising results compared to a single phase 6DOF registration in vertically structured environments. Also, the disadvantages of the method are discussed, proposing possible solutions. Finally, the future prospects of the research are presented.Schopnost lokalizace a navigace je podmínkou autonomního provozu mobilních robotů. Předmětem této disertační práce jsou navigační metody se zaměřením na metodu pro simultánní lokalizaci a mapování (SLAM) mobilních robotů v šesti stupních volnosti (6DOF). Nedílnou součástí tohoto výzkumu byl vývoj platformy pro sběr 3D vzdálenostních dat s využitím kontinuálně naklápěného laserového řádkového scanneru. Tato platforma byla vyvinuta jako samostatný modul, aby mohla být umístěna na různé šasi mobilních robotů. Úkol lokalizace a mapování je ekvivalentní registraci více 3D obrazů do společného souřadného systému. Pro tyto účely byla vyvinuta metoda založená na algoritmu Iterative Closest Point Algorithm (ICP). Původně implementovaná verze navigační metody využívá ICP s akcelerací pomocí kd-stromů přičemž jsou zhodnoceny její kvalitativní a výkonnostní aspekty. Na základě této analýzy byly vyvinuty rozšíření původní metody založené na ICP. Jednou z hlavních modifikací je faktorizace registračního procesu, kdy tato faktorizace je založena na redukci dat: vytvoření 2D „leveled“ map (ve smyslu jednoúrovňových map) ze 3D vzdálenostních obrazů. Pro tuto redukci je technologicky i algoritmicky zajištěna invariantnost těchto map vůči třem stupňům volnosti. Tyto redukované mapy jsou registrovány pomocí ICP ve zbylých třech stupních volnosti, přičemž získaná transformace je aplikována na 3D data za účelem před-registrace 3D obrazů. Následně je provedena robustní 6DOF registrace. Rozšířená metoda je v disertační práci v popsána spolu se všemi podstatnými modifikacemi. Vyvinutá metoda byla otestována a zhodnocena s využitím skutečných 3D vzdálenostních dat naměřených v různých vnitřních prostředích. Jsou zhodnoceny přínosy faktorizace a jiných modifikací ve srovnání s původní jednofázovou 6DOF registrací, také jsou zmíněny nevýhody implementované metody a navrženy způsoby jejich řešení. Nakonec následuje návrh budoucího výzkumu a diskuse o možnostech dalšího rozvoje.
Characterization of a RS-LiDAR for 3D Perception
High precision 3D LiDARs are still expensive and hard to acquire. This paper
presents the characteristics of RS-LiDAR, a model of low-cost LiDAR with
sufficient supplies, in comparison with VLP-16. The paper also provides a set
of evaluations to analyze the characterizations and performances of LiDARs
sensors. This work analyzes multiple properties, such as drift effects,
distance effects, color effects and sensor orientation effects, in the context
of 3D perception. By comparing with Velodyne LiDAR, we found RS-LiDAR as a
cheaper and acquirable substitute of VLP-16 with similar efficiency.Comment: For ICRA201
- …