Isochronets: a High-Speed Network Switching Architecture

Traditional switching techniques need hundred- or thousand-MIPS processing power within switches to support Gbit/s transmission rates available today. These techniques anchor their decision-making on control information within transmitted frames and thus must resolve routes at the speed in which frames are being pumped into switches. Isochronets can potentially switch at any transmission rate by making switching decisions independent of frame contents. Isochronets divide network bandwidth among routing trees, a technique called Route Division Multiple Access (RDMA). Frames access network resources through the appropriate routing tree to the destination. Frame structures are irrelevant for switching decisions. Consequently, Isochronets can support multiple framing protocols without adaptation layers and are strong candidates for all-optical implementations. All network-layer functions are reduced to an admission control mechanism designed to provide quality of service (QOS) guarantees for multiple classes of traffic. The main results of this work are: (1) A new network architecture suitable for high-speed transmissions; (2) An implementation of Isochronets using cheap off-theshelf components; (3) A comparison of RDMA with more traditional switching techniques, such as Packet Switching and Circuit Switching; (4) New protocols necessary for Isochronet operations; and (5) Use of Isochronet techniques at higher layers of the protocol stack (in particular, we show how Isochronet techniques may solve routing problems in ATM networks)

A flexible, abstract network optimisation framework and its application to telecommunications network design and configuration problems

A flexible, generic network optimisation framework is described. The purpose of this framework is to reduce the effort required to solve particular network optimisation problems. The essential idea behind the framework is to develop a generic network optimisation problem to which many network optimisation problems can be mapped. A number of approaches to solve this generic problem can then be developed. To solve some specific network design or configuration problem the specific problem is mapped to the generic problem and one of the problem solvers is used to obtain a solution. This solution is then mapped back to the specific problem domain. Using the framework in this way, a network optimisation problem can be solved using less effort than modelling the problem and developing some algorithm to solve the model. The use of the framework is illustrated in two separate problems: design of an enterprise network to accommodate voice and data traffic and configuration of a core diffserv/MPLS network. In both cases, the framework enabled solutions to be found with less effort than would be required if a more direct approach was used

Congestion control mechanisms within MPLS networks

PhDAbstract not availabl

Recent trends in IP/NGEO satellite communication systems: transport, routing, and mobility management concerns

科研費報告書収録論文(課題番号:17500030/研究代表者:加藤寧/インターネットと高親和性を有する次世代低軌道衛星ネットワークに関する基盤研究

Saturation routing for asynchronous transfer mode (ATM) networks

The main objective of this thesis is to show that saturation routing, often in the past considered inefficient, can in fact be a viable approach to use in many important applications and services over an Asynchronous Transfer Mode (ATM) network. For other applications and services, a hybrid approach (one that partially uses saturation routing) is presented. First, the minimum effects of saturation routing are demonstrated by showing that the ratio, defined as f, of routing overhead cells over information cells is small even for large networks. Second, modeling and simulation and M/D/l queuing analysis techniques are used to show that the overall effect on performance when using saturation routing is not significant over ATM networks. Then saturation routing ATM implementation is also provided, with important extensions to services such as multicast routing. After an analytical comparison, in terms of routing overhead, is made between Saturation Routing and the currently proposed Private Network-Network Interface (PNNI) procedure for ATM routing made by the ATM forum. This comparison is made for networks of different sizes (343node and 2401 -node networks) and different number of hierarchical levels (3 and 4 levels of hierarchy). The results show that the higher the number of levels of hierarchy and the farthest (in terms of hierarchical levels) the source and the destination nodes are from each other, the more advantageous saturation routing becomes. Finally, a set of measures of performance for use by saturation routing (or any routing algorithm), as metrics for routing path selection, is proposed. Among these measures, an innovative new measure of performance derived for measuring quality of service provided to Constant Bit Rate (CBR) users (e.g., such as voice and video users) called the Burst Voice Arrival Lag (BVAL) is described and derived

Methods of Congestion Control for Adaptive Continuous Media

Since the first exchange of data between machines in different locations in early 1960s, computer networks have grown exponentially with millions of people now using the Internet. With this, there has also been a rapid increase in different kinds of services offered over the World Wide Web from simple e-mails to streaming video. It is generally accepted that the commonly used protocol suite TCP/IP alone is not adequate for a number of modern applications with high bandwidth and minimal delay requirements. Many technologies are emerging such as IPv6, Diffserv, Intserv etc, which aim to replace the onesize-fits-all approach of the current lPv4. There is a consensus that the networks will have to be capable of multi-service and will have to isolate different classes of traffic through bandwidth partitioning such that, for example, low priority best-effort traffic does not cause delay for high priority video traffic. However, this research identifies that even within a class there may be delays or losses due to congestion and the problem will require different solutions in different classes. The focus of this research is on the requirements of the adaptive continuous media class. These are traffic flows that require a good Quality of Service but are also able to adapt to the network conditions by accepting some degradation in quality. It is potentially the most flexible traffic class and therefore, one of the most useful types for an increasing number of applications. This thesis discusses the QoS requirements of adaptive continuous media and identifies an ideal feedback based control system that would be suitable for this class. A number of current methods of congestion control have been investigated and two methods that have been shown to be successful with data traffic have been evaluated to ascertain if they could be adapted for adaptive continuous media. A novel method of control based on percentile monitoring of the queue occupancy is then proposed and developed. Simulation results demonstrate that the percentile monitoring based method is more appropriate to this type of flow. The problem of congestion control at aggregating nodes of the network hierarchy, where thousands of adaptive flows may be aggregated to a single flow, is then considered. A unique method of pricing mean and variance is developed such that each individual flow is charged fairly for its contribution to the congestion

Measurement Based Reconfigurations in Optical Ring Metro Networks

Single-hop wavelength division multiplexing (WDM) optical ring networks operating in packet mode are one of themost promising architectures for the design of innovative metropolitan network (metro) architectures. They permit a cost-effective design, with a good combination of optical and electronic technologies, while supporting features like restoration and reconfiguration that are essential in any metro scenario. In this article, we address the tunability requirements that lead to an effective resource usage and permit reconfiguration in optical WDM metros.We introduce reconfiguration algorithms that, on the basis of traffic measurements, adapt the network configuration to traffic demands to optimize performance. Using a specific network architecture as a reference case, the paper aims at the broader goal of showing which are the advantages fostered by innovative network designs exploiting the features of optical technologies