Quality of Service over Specific Link Layers: state of the art report

The Integrated Services concept is proposed as an enhancement to the current Internet architecture, to provide a better Quality of Service (QoS) than that provided by the traditional Best-Effort service. The features of the Integrated Services are explained in this report. To support Integrated Services, certain requirements are posed on the underlying link layer. These requirements are studied by the Integrated Services over Specific Link Layers (ISSLL) IETF working group. The status of this ongoing research is reported in this document. To be more specific, the solutions to provide Integrated Services over ATM, IEEE 802 LAN technologies and low-bitrate links are evaluated in detail. The ISSLL working group has not yet studied the requirements, that are posed on the underlying link layer, when this link layer is wireless. Therefore, this state of the art report is extended with an identification of the requirements that are posed on the underlying wireless link, to provide differentiated Quality of Service

A new charging scheme for ATM based on QoS

PhDNew services are emerging rapidly within the world of telecommunications. Charging strategies that were appropriate for individual transfer capabilities are no longer appropriate for an integrated broadband communications network. There is currently a range of technologies (such as cable television, telephony and narrow band ISDN) for the different services in use and a limited number of charging schemes are applicable for each of the underlying technologies irrespective of the services used over it. Difficulties arise when a wide range of services has to be supported on the same integrated technology such as asynchronous transfer mode (ATM); in such cases the type of service in use and the impact it has on the network becomes much more important. The subject of this thesis, therefore, is the charging strategies for integrated broadband communications networks. That is, the identification of the requirements associated with ATM charging schemes and the proposal of a new approach to charging for ATM called the “quality of service based charging scheme”. Charging for ATM is influenced by three important components: the type and content of a service being offered; the type of customer using the services; and the traffic characteristics belonging to the application supporting the services. The first two issues will largely be dependent on the business and regulatory requirements of the operators. The last item, and an essential one for ATM, is the bridge between technology and business; how are the resources used by a service quantified? Charging that is based on resource usage at the network level was the prime focus of the research reported here. With the proposed charging scheme, a distinction is first made between the four different ATM transfer capabilities that will support various services and the different quality of service requirements that may be applicable to each of them. Then, resources are distributed among buffers set-up to support the combination of these transfer capabilities and quality of services. The buffers are dimensioned according to the M/D/1/K and the ND/D/1 queuing analysis to determine the buffer efficiency and quality of service requirements. This dimensioning provides the basis for fixing the price per unit of resource and time. The actual resource used by a connection is based on the volume of cells transmitted or peak cell rate allocation in combination with traffic shapers if appropriate. Shapers are also dimensioned using the quality of service parameters. Since the buffer 4 efficiency is dependent on the quality of service requirements, users (customers) of ATM networks buy quality of service. The actual price of a connection is further subjected to a number of transformations based on the size of the resource purchased, the time of the day at which a connection is made, and the geographical locality of the destination switch. It is demonstrated that the proposed charging scheme meets all the requirements of customers and of network operators. In addition the result of the comparison of the new scheme with a number of existing, prominent, ATM charging schemes is presented, showing that the performance of the proposed scheme is better in terms of meeting the expectations of both the customers and the network operators

Quality of service over ATM networks

PhDAbstract not availabl

Some aspects of traffic control and performance evaluation of ATM networks

The emerging high-speed Asynchronous Transfer Mode (ATM) networks are expected to integrate through statistical multiplexing large numbers of traffic sources having a broad range of statistical characteristics and different Quality of Service (QOS) requirements. To achieve high utilisation of network resources while maintaining the QOS, efficient traffic management strategies have to be developed. This thesis considers the problem of traffic control for ATM networks. The thesis studies the application of neural networks to various ATM traffic control issues such as feedback congestion control, traffic characterization, bandwidth estimation, and Call Admission Control (CAC). A novel adaptive congestion control approach based on a neural network that uses reinforcement learning is developed. It is shown that the neural controller is very effective in providing general QOS control. A Finite Impulse Response (FIR) neural network is proposed to adaptively predict the traffic arrival process by learning the relationship between the past and future traffic variations. On the basis of this prediction, a feedback flow control scheme at input access nodes of the network is presented. Simulation results demonstrate significant performance improvement over conventional control mechanisms. In addition, an accurate yet computationally efficient approach to effective bandwidth estimation for multiplexed connections is investigated. In this method, a feed forward neural network is employed to model the nonlinear relationship between the effective bandwidth and the traffic situations and a QOS measure. Applications of this approach to admission control, bandwidth allocation and dynamic routing are also discussed. A detailed investigation has indicated that CAC schemes based on effective bandwidth approximation can be very conservative and prevent optimal use of network resources. A modified effective bandwidth CAC approach is therefore proposed to overcome the drawback of conventional methods. Considering statistical multiplexing between traffic sources, we directly calculate the effective bandwidth of the aggregate traffic which is modelled by a two-state Markov modulated Poisson process via matching four important statistics. We use the theory of large deviations to provide a unified description of effective bandwidths for various traffic sources and the associated ATM multiplexer queueing performance approximations, illustrating their strengths and limitations. In addition, a more accurate estimation method for ATM QOS parameters based on the Bahadur-Rao theorem is proposed, which is a refinement of the original effective bandwidth approximation and can lead to higher link utilisation

Performance Management in ATM Networks

ATM is representative of the connection-oriented resource provisioning classof protocols. The ATM network is expected to provide end-to-end QoS guaranteesto connections in the form of bounds on delays, errors and/or losses. Performancemanagement involves measurement of QoS parameters, and application of controlmeasures (if required) to improve the QoS provided to connections, or to improvethe resource utilization at switches. QoS provisioning is very important for realtimeconnections in which losses are irrecoverable and delays cause interruptionsin service. QoS of connections on a node is a direct function of the queueing andscheduling on the switch. Most scheduling architectures provide static allocationof resources (scheduling priority, maximum buffer) at connection setup time. Endto-end bounds are obtainable for some schedulers, however these are precluded forheterogeneously composed networks. The resource allocation does not adapt to theQoS provided on connections in real time. In addition, mechanisms to measurethe QoS of a connection in real-time are scarce.In this thesis, a novel framework for performance management is proposed. Itprovides QoS guarantees to real time connections. It comprises of in-service QoSmonitoring mechanisms, a hierarchical scheduling algorithm based on dynamicpriorities that are adaptive to measurements, and methods to tune the schedulers atindividual nodes based on the end-to-end measurements. Also, a novel scheduler isintroduced for scheduling maximum delay sensitive traffic. The worst case analysisfor the leaky bucket constrained traffic arrivals is presented for this scheduler. Thisscheduler is also implemented on a switch and its practical aspects are analyzed.In order to understand the implementability of complex scheduling mechanisms,a comprehensive survey of the state-of-the-art technology used in the industry isperformed. The thesis also introduces a method of measuring the one-way delayand jitter in a connection using in-service monitoring by special cells

Congestion Control and Traffic Management in ATM Networks: Recent Advances and A Survey

Congestion control mechanisms for ATM networks as selected by the ATM Forum traffic management group are described. Reasons behind these selections are explained. In particular, selection criteria for selection between rate-based and credit-based approach and the key points of the debate between the two approaches are presented. The approach that was finally selected and several other schemes that were considered are described.Comment: Invited submission to Computer Networks and ISDN System

Novel techniques in large scaleable ATM switches

Bibliography: p. 172-178.This dissertation explores the research area of large scale ATM switches. The requirements for an ATM switch are determined by overviewing the ATM network architecture. These requirements lead to the discussion of an abstract ATM switch which illustrates the components of an ATM switch that automatically scale with increasing switch size (the Input Modules and Output Modules) and those that do not (the Connection Admission Control and Switch Management systems as well as the Cell Switch Fabric). An architecture is suggested which may result in a scalable Switch Management and Connection Admission Control function. However, the main thrust of the dissertation is confined to the cell switch fabric. The fundamental mathematical limits of ATM switches and buffer placement is presented next emphasising the desirability of output buffering. This is followed by an overview of the possible routing strategies in a multi-stage interconnection network. A variety of space division switches are then considered which leads to a discussion of the hypercube fabric, (a novel switching technique). The hypercube fabric achieves good performance with an O(N.log₂N)²) scaling. The output module, resequencing, cell scheduling and output buffering technique is presented leading to a complete description of the proposed ATM switch. Various traffic models are used to quantify the switch's performance. These include a simple exponential inter-arrival time model, a locality of reference model and a self-similar, bursty, multiplexed Variable Bit Rate (VBR) model. FIFO queueing is simple to implement in an ATNI switch, however, more responsive queueing strategies can result in an improved performance. An associative memory is presented which allows the separate queues in the ATM switch to be effectively logically combined into a single FIFO queue. The associative memory is described in detail and its feasibility is shown by laying out the Integrated Circuit masks and performing an analogue simulation of the IC's performance is SPICE3. Although optimisations were required to the original design, the feasibility of the approach is shown with a 15Ƞs write time and a 160Ƞs read time for a 32 row, 8 priority bit, 10 routing bit version of the memory. This is achieved with 2µm technology, more advanced technologies may result in even better performance. The various traffic models and switch models are simulated in a number of runs. This shows the performance of the hypercube which outperforms a Clos network of equivalent technology and approaches the performance of an ideal reference fabric. The associative memory leverages a significant performance advantage in the hypercube network and a modest advantage in the Clos network. The performance of the switches is shown to degrade with increasing traffic density, increasing locality of reference, increasing variance in the cell rate and increasing burst length. Interestingly, the fabrics show no real degradation in response to increasing self similarity in the fabric. Lastly, the appendices present suggestions on how redundancy, reliability and multicasting can be achieved in the hypercube fabric. An overview of integrated circuits is provided. A brief description of commercial ATM switching products is given. Lastly, a road map to the simulation code is provided in the form of descriptions of the functionality found in all of the files within the source tree. This is intended to provide the starting ground for anyone wishing to modify or extend the simulation system developed for this thesis