6,401 research outputs found

    A Trust Based Fuzzy Algorithm for Congestion Control in Wireless Multimedia Sensor Networks (TFCC)

    Full text link
    Network congestion has become a critical issue for resource constrained Wireless Sensor Networks (WSNs), especially for Wireless Multimedia Sensor Networks (WMSNs)where large volume of multimedia data is transmitted through the network. If the traffic load is greater than the available capacity of the sensor network, congestion occurs and it causes buffer overflow, packet drop, deterioration of network throughput and quality of service (QoS). Again, the faulty nodes of the network also aggravate congestion by diffusing useless packets or retransmitting the same packet several times. This results in the wastage of energy and decrease in network lifetime. To address this challenge, a new congestion control algorithm is proposed in which the faulty nodes are identified and blocked from data communication by using the concept of trust. The trust metric of all the nodes in the WMSN is derived by using a two-stage Fuzzy inferencing scheme. The traffic flow from source to sink is optimized by implementing the Link State Routing Protocol. The congestion of the sensor nodes is controlled by regulating the rate of traffic flow on the basis of the priority of the traffic. Finally we compare our protocol with other existing congestion control protocols to show the merit of the work.Comment: 6 pages, 5 figures, conference pape

    A Priority Rate-Based Routing Protocol for wireless multimedia sensor networks

    Get PDF
    The development of affordable hardware has made it possible to transmit multimedia data over a wireless medium using sensor devices. Deployed sensors span larger geographical areas, generating different kinds of traffic that need to be communicated either in real-time or non-real-time mode to the sink. The tiny sized design of sensor nodes has made them even more attractive in various environments as they can be left unattended for longer periods. Since sensor nodes are equipped with limited resources, newer energy-efficient protocols and architectures are required in order to meet requirements within their limited capabilities when dealing with multimedia data. This is because multimedia applications are characterized by strict quality of service requirements that distinctively differentiate them from other data types during transmission. However, the large volume of data produced by the sensor nodes can easily cause traffic congestion making it difficult to meet these requirements. Congestion has negative impacts on the data transmitted as well as the sensor network at large. Failure to control congestion will affect the quality of multimedia data received at the sink and further shorten the system lifetime. Next generation wireless sensor networks are predicted to deploy a different model where service is allocated to multimedia while bearing congestion in mind. Applying traditional wireless sensor routing algorithms to wireless multimedia sensor networks may lead to high delay and poor visual quality for multimedia applications. In this research, a Priority Rate-Based Routing Protocol (PRRP) that assigns priorities to traffic depending on their service requirements is proposed. PRRP detects congestion by using adaptive random early detection (A-RED) and a priority rate-based adjustment technique to control congestion. We study the performance of our proposed multi-path routing algorithm for real-time traffic when mixed with three non real-time traffic each with a different priority: high, medium or low. Simulation results show that the proposed algorithm performs better when compared to two existing algorithms, PCCP and PBRC-SD, in terms of queueing delay, packet loss and throughput

    Trust Integrated Congestion Aware Energy Efficient Routing forWireless Multimedia Sensor Networks (TCEER)

    Get PDF
    Congestion control and energy consumption in Wireless Multimedia Sensor Network is a new research subject which has been ushered in through the introduction of multimedia sensor nodes that are capable of transmitting large volume of high bit rate heterogeneous multimedia data. Most of the existing congestion control algorithms for Wireless Sensor Networks do not discuss the impact of security attacks by the malicious nodes in network congestion. Sensor nodes are prone to failure and malicious nodes aggravate congestion by sending fake messages. Hence, isolation of malicious nodes from data routing path reduces congestion significantly. Considering that, we have proposed a new Trust Integrated Congestion Aware Energy Efficient Routing algorithm, in which malicious nodes are identified using the concept of trust. The parameter Node Potential is computed, on the basis of the trust value, congestion status, residual energy and the distance of the node from the base station, using Fuzzy Logic Controller. The source node selects the node with the highest potential in its one hop radio range for data transmission which is light weight as well as energy efficient. Finally, merits of the proposed scheme are discussed by comparing them with existing protocols and the study exhibits 25% improvements in network performance

    A Trust Based Congestion Aware Hybrid Ant Colony Optimization Algorithm for Energy Efficient Routing in Wireless Sensor Networks (TC-ACO)

    Full text link
    Congestion is a problem of paramount importance in resource constrained Wireless Sensor Networks, especially for large networks, where the traffic loads exceed the available capacity of the resources. Sensor nodes are prone to failure and the misbehavior of these faulty nodes creates further congestion. The resulting effect is a degradation in network performance, additional computation and increased energy consumption, which in turn decreases network lifetime. Hence, the data packet routing algorithm should consider congestion as one of the parameters, in addition to the role of the faulty nodes and not merely energy efficient protocols. Unfortunately most of the researchers have tried to make the routing schemes energy efficient without considering congestion factor and the effect of the faulty nodes. In this paper we have proposed a congestion aware, energy efficient, routing approach that utilizes Ant Colony Optimization algorithm, in which faulty nodes are isolated by means of the concept of trust. The merits of the proposed scheme are verified through simulations where they are compared with other protocols.Comment: 6 pages, 5 figures and 2 tables (Conference Paper

    Two-Hop Routing with Traffic-Differentiation for QoS Guarantee in Wireless Sensor Networks

    Get PDF
    This paper proposes a Traffic-Differentiated Two-Hop Routing protocol for Quality of Service (QoS) in Wireless Sensor Networks (WSNs). It targets WSN applications having different types of data traffic with several priorities. The protocol achieves to increase Packet Reception Ratio (PRR) and reduce end-to-end delay while considering multi-queue priority policy, two-hop neighborhood information, link reliability and power efficiency. The protocol is modular and utilizes effective methods for estimating the link metrics. Numerical results show that the proposed protocol is a feasible solution to addresses QoS service differenti- ation for traffic with different priorities.Comment: 13 page

    Publish/subscribe protocol in wireless sensor networks: improved reliability and timeliness

    Get PDF
    The rapidly-evolving demand of applications using wireless sensor networks in several areas such as building and industrial automation or smart cities, among other, makes it necessary to determine and provide QoS support mechanisms which can satisfy the requirements of applications. In this paper we propose a mechanism that establishes different QoS levels, based on Publish/Subscribe model for wireless networks to meet application requirements, to provide reliable delivery of packet and timeliness. The first level delivers packets in a best effort way. The second one intends to provide reliable packet delivery with a novel approach for Retransmission Timeout (RTO) calculation, which adjusts the RTO depending on the subscriber Packet Delivery Ratio (PDR). The third one provides the same reliable packet delivery as the second one, but in addition, it provides data aggregation trying to be efficient in terms of energy consumption and the use of network bandwidth. The last one provides timeliness in the packet delivery. We evaluate each QoS Level with several performance metrics such as PDR, Message Delivery Ratio, Duplicated and Retransmitted Packet Ratio and Packet Timeliness Ratio to demonstrate that our proposal provides significant improvements based on the increase of the PDR obtained.Peer ReviewedPostprint (author's final draft
    • …
    corecore