5,373 research outputs found
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
28 GHz and 73 GHz Millimeter-Wave Indoor Propagation Measurements and Path Loss Models
This paper presents 28 GHz and 73 GHz millimeter- wave propagation
measurements performed in a typical office environment using a 400
Megachip-per-second broadband sliding correlator channel sounder and highly
directional steerable 15 dBi (30 degrees beamwidth) and 20 dBi (15 degrees
beamwidth) horn antennas. Power delay profiles were acquired for 48
transmitter-receiver location combinations over distances ranging from 3.9 m to
45.9 m with maximum transmit powers of 24 dBm and 12.3 dBm at 28 GHz and 73
GHz, respectively. Directional and omnidirectional path loss models and RMS
delay spread statistics are presented for line-of-sight and non-line-of-sight
environments for both co- and cross-polarized antenna configurations. The LOS
omnidirectional path loss exponents were 1.1 and 1.3 at 28 GHz and 73 GHz, and
2.7 and 3.2 in NLOS at 28 GHz and 73 GHz, respectively, for
vertically-polarized antennas. The mean directional RMS delay spreads were 18.4
ns and 13.3 ns, with maximum values of 193 ns and 288 ns at 28 GHz and 73 GHz,
respectively.Comment: 7 pages, 9 figures, 2015 IEEE International Conference on
Communications (ICC), ICC Workshop
Coverage prediction and optimization algorithms for indoor environments
A heuristic algorithm is developed for the prediction of indoor coverage. Measurements on one floor of an office building are performed to investigate propagation characteristics and validations with very limited additional tuning are performed on another floor of the same building and in three other buildings. The prediction method relies on the free-space loss model for every environment, this way intending to reduce the dependency of the model on the environment upon which the model is based, as is the case with many other models. The applicability of the algorithm to a wireless testbed network with fixed WiFi 802.11b/g nodes is discussed based on a site survey. The prediction algorithm can easily be implemented in network planning algorithms, as will be illustrated with a network reduction and a network optimization algorithm. We aim to provide an physically intuitive, yet accurate prediction of the path loss for different building types
5G 3GPP-like Channel Models for Outdoor Urban Microcellular and Macrocellular Environments
For the development of new 5G systems to operate in bands up to 100 GHz,
there is a need for accurate radio propagation models at these bands that
currently are not addressed by existing channel models developed for bands
below 6 GHz. This document presents a preliminary overview of 5G channel models
for bands up to 100 GHz. These have been derived based on extensive measurement
and ray tracing results across a multitude of frequencies from 6 GHz to 100
GHz, and this document describes an initial 3D channel model which includes: 1)
typical deployment scenarios for urban microcells (UMi) and urban macrocells
(UMa), and 2) a baseline model for incorporating path loss, shadow fading, line
of sight probability, penetration and blockage models for the typical
scenarios. Various processing methodologies such as clustering and antenna
decoupling algorithms are also presented.Comment: To be published in 2016 IEEE 83rd Vehicular Technology Conference
Spring (VTC 2016-Spring), Nanjing, China, May 201
Investigation of Prediction Accuracy, Sensitivity, and Parameter Stability of Large-Scale Propagation Path Loss Models for 5G Wireless Communications
This paper compares three candidate large-scale propagation path loss models
for use over the entire microwave and millimeter-wave (mmWave) radio spectrum:
the alpha-beta-gamma (ABG) model, the close-in (CI) free space reference
distance model, and the CI model with a frequency-weighted path loss exponent
(CIF). Each of these models have been recently studied for use in standards
bodies such as 3GPP, and for use in the design of fifth generation (5G)
wireless systems in urban macrocell, urban microcell, and indoor office and
shopping mall scenarios. Here we compare the accuracy and sensitivity of these
models using measured data from 30 propagation measurement datasets from 2 GHz
to 73 GHz over distances ranging from 4 m to 1238 m. A series of sensitivity
analyses of the three models show that the physically-based two-parameter CI
model and three-parameter CIF model offer computational simplicity, have very
similar goodness of fit (i.e., the shadow fading standard deviation), exhibit
more stable model parameter behavior across frequencies and distances, and
yield smaller prediction error in sensitivity testing across distances and
frequencies, when compared to the four-parameter ABG model. Results show the CI
model with a 1 m close-in reference distance is suitable for outdoor
environments, while the CIF model is more appropriate for indoor modeling. The
CI and CIF models are easily implemented in existing 3GPP models by making a
very subtle modification -- by replacing a floating non-physically based
constant with a frequency-dependent constant that represents free space path
loss in the first meter of propagation.Comment: Open access available at:
http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=743465
- …