Identifying Humans by the Shape of Their Heartbeats and Materials by Their X-Ray Scattering Profiles

Security needs at access control points presents itself in the form of human identification and/or material identification. The field of Biometrics deals with the problem of identifying individuals based on the signal measured from them. One approach to material identification involves matching their x-ray scattering profiles with a database of known materials. Classical biometric traits such as fingerprints, facial images, speech, iris and retinal scans are plagued by potential circumvention they could be copied and later used by an impostor. To address this problem, other bodily traits such as the electrical signal acquired from the brain (electroencephalogram) or the heart (electrocardiogram) and the mechanical signals acquired from the heart (heart sound, laser Doppler vibrometry measures of the carotid pulse) have been investigated. These signals depend on the physiology of the body, and require the individual to be alive and present during acquisition, potentially overcoming circumvention. We investigate the use of the electrocardiogram (ECG) and carotid laser Doppler vibrometry (LDV) signal, both individually and in unison, for biometric identity recognition. A parametric modeling approach to system design is employed, where the system parameters are estimated from training data. The estimated model is then validated using testing data. A typical identity recognition system can operate in either the authentication (verification) or identification mode. The performance of the biometric identity recognition systems is evaluated using receiver operating characteristic (ROC) or detection error tradeoff (DET) curves, in the authentication mode, and cumulative match characteristic (CMC) curves, in the identification mode. The performance of the ECG- and LDV-based identity recognition systems is comparable, but is worse than those of classical biometric systems. Authentication performance below 1% equal error rate (EER) can be attained when the training and testing data are obtained from a single measurement session. When the training and testing data are obtained from different measurement sessions, allowing for a potential short-term or long-term change in the physiology, the authentication EER performance degrades to about 6 to 7%. Leveraging both the electrical (ECG) and mechanical (LDV) aspects of the heart, we obtain a performance gain of over 50%, relative to each individual ECG-based or LDV-based identity recognition system, bringing us closer to the performance of classical biometrics, with the added advantage of anti-circumvention. We consider the problem of designing combined x-ray attenuation and scatter systems and the algorithms to reconstruct images from the systems. As is the case within a computational imaging framework, we tackle the problem by taking a joint system and algorithm design approach. Accurate modeling of the attenuation of incident and scattered photons within a scatter imaging setup will ultimately lead to more accurate estimates of the scatter densities of an illuminated object. Such scattering densities can then be used in material classification. In x-ray scatter imaging, tomographic measurements of the forward scatter distribution are used to infer scatter densities within a volume. A mask placed between the object and the detector array provides information about scatter angles. An efficient computational implementation of the forward and backward model facilitates iterative algorithms based upon a Poisson log-likelihood. The design of the scatter imaging system influences the algorithmic choices we make. In turn, the need for efficient algorithms guides the system design. We begin by analyzing an x-ray scatter system fitted with a fanbeam source distribution and flat-panel energy-integrating detectors. Efficient algorithms for reconstructing object scatter densities from scatter measurements made on this system are developed. Building on the fanbeam source, energy-integrating at-panel detection model, we develop a pencil beam model and an energy-sensitive detection model. The scatter forward models and reconstruction algorithms are validated on simulated, Monte Carlo, and real data. We describe a prototype x-ray attenuation scanner, co-registered with the scatter system, which was built to provide complementary attenuation information to the scatter reconstruction and present results of applying alternating minimization reconstruction algorithms on measurements from the scanner

Comparative Study And Analysis Of Quality Based Multibiometric Technique Using Fuzzy Inference System

Biometric is a science and technology of measuring and analyzing biological data i.e. physical or behavioral traits which is able to uniquely recognize a person from others. Prior studies of biometric verification systems with fusion of several biometric sources have been proved to be outstanding over single biometric system. However, fusion approach without considering the quality information of the data used will affect the system performance where in some cases the performances of the fusion system may become worse compared to the performances of either one of the single systems. In order to overcome this limitation, this study proposes a quality based fusion scheme by designing a fuzzy inference system (FIS) which is able to determine the optimum weight to combine the parameter for fusion systems in changing conditions. For this purpose, fusion systems which combine two modalities i.e. speech and lip traits are experimented. For speech signal, Mel Frequency Cepstral Coefficient (MFCC) is used as features while region of interest (ROI) of lip image is employed as lip features. Support vector machine (SVM) is then executed as classifier to the verification system. For validation, common fusion schemes i.e. minimum rule, maximum rule, simple sum rule, weighted sum rule are compared to the proposed quality based fusion scheme. From the experimental results at 35dB SNR of speech and 0.8 quality density of lip, the EER percentages for speech, lip, minimum rule, maximum rule, simple sum rule, weighted sum rule systems are observed as 5.9210%, 37.2157%, 33.2676%, 31.1364%, 4.0112% and 14.9023%, respectively compared to the performances of sugeno-type FIS and mamdani-type FIS i.e. 1.9974% and 1.9745%

Strategies for exploiting independent cloud implementations of biometric experts in multibiometric scenarios

Cloud computing represents one of the fastest growing areas of technology and offers a new computing model for various applications and services. This model is particularly interesting for the area of biometric recognition, where scalability, processing power and storage requirements are becoming a bigger and bigger issue with each new generation of recognition technology. Next to the availability of computing resources, another important aspect of cloud computing with respect to biometrics is accessability. Since biometric cloud-services are easily accessible, it is possible to combine different existing implementations and design new multi-biometric services that next to almost unlimited resources also offer superior recognition performance and, consequently, ensure improved security to its client applications. Unfortunately, the literature on the best strategies of how to combine existing implementations of cloud-based biometric experts into a multi-biometric service is virtually non-existent. In this paper we try to close this gap and evaluate different strategies for combining existing biometric experts into a multi-biometric cloud-service. We analyze the (fusion) strategies from different perspectives such as performance gains, training complexity or resource consumption and present results and findings important to software developers and other researchers working in the areas of biometrics and cloud computing. The analysis is conducted based on two biometric cloud-services, which are also presented in the paper

Multimodal score-level fusion using hybrid ga-pso for multibiometric system

Due to the limitations that unimodal systems suffer from, Multibiometric systems have gained much interest in the research community on the grounds that they alleviate most of these limitations and are capable of producing better accuracies and performances. One of the important steps to reach this is the choice of the fusion techniques utilized. In this paper, a modeling step based on a hybrid algorithm, that includes Particle Swarm Optimization and Genetic Algorithm, is proposed to combine two biometric modalities at the score level. This optimization technique is employed to find the optimum weights associated to the modalities being fused. An analysis of the results is carried out on the basis of comparing the EER accuracies and ROC curves of the fusion techniques. Furthermore, the execution speed of the hybrid approach is discussed and compared to that of the single optimization algorithms, GA and PS

State of the Art in Biometric Key Binding and Key Generation Schemes

Direct storage of biometric templates in databases exposes the authentication system and legitimate users to numerous security and privacy challenges. Biometric cryptosystems or template protection schemes are used to overcome the security and privacy challenges associated with the use of biometrics as a means of authentication. This paper presents a review of previous works in biometric key binding and key generation schemes. The review focuses on key binding techniques such as biometric encryption, fuzzy commitment scheme, fuzzy vault and shielding function. Two categories of key generation schemes considered are private template and quantization schemes. The paper also discusses the modes of operations, strengths and weaknesses of various kinds of key-based template protection schemes. The goal is to provide the reader with a clear understanding of the current and emerging trends in key-based biometric cryptosystems

Multibiometric security in wireless communication systems

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University, 05/08/2010.This thesis has aimed to explore an application of Multibiometrics to secured wireless communications. The medium of study for this purpose included Wi-Fi, 3G, and WiMAX, over which simulations and experimental studies were carried out to assess the performance. In specific, restriction of access to authorized users only is provided by a technique referred to hereafter as multibiometric cryptosystem. In brief, the system is built upon a complete challenge/response methodology in order to obtain a high level of security on the basis of user identification by fingerprint and further confirmation by verification of the user through text-dependent speaker recognition. First is the enrolment phase by which the database of watermarked fingerprints with memorable texts along with the voice features, based on the same texts, is created by sending them to the server through wireless channel. Later is the verification stage at which claimed users, ones who claim are genuine, are verified against the database, and it consists of five steps. Initially faced by the identification level, one is asked to first present one’s fingerprint and a memorable word, former is watermarked into latter, in order for system to authenticate the fingerprint and verify the validity of it by retrieving the challenge for accepted user. The following three steps then involve speaker recognition including the user responding to the challenge by text-dependent voice, server authenticating the response, and finally server accepting/rejecting the user. In order to implement fingerprint watermarking, i.e. incorporating the memorable word as a watermark message into the fingerprint image, an algorithm of five steps has been developed. The first three novel steps having to do with the fingerprint image enhancement (CLAHE with 'Clip Limit', standard deviation analysis and sliding neighborhood) have been followed with further two steps for embedding, and extracting the watermark into the enhanced fingerprint image utilising Discrete Wavelet Transform (DWT). In the speaker recognition stage, the limitations of this technique in wireless communication have been addressed by sending voice feature (cepstral coefficients) instead of raw sample. This scheme is to reap the advantages of reducing the transmission time and dependency of the data on communication channel, together with no loss of packet. Finally, the obtained results have verified the claims

Securing Cloud Storage by Transparent Biometric Cryptography

With the capability of storing huge volumes of data over the Internet, cloud storage has become a popular and desirable service for individuals and enterprises. The security issues, nevertheless, have been the intense debate within the cloud community. Significant attacks can be taken place, the most common being guessing the (poor) passwords. Given weaknesses with verification credentials, malicious attacks have happened across a variety of well-known storage services (i.e. Dropbox and Google Drive) – resulting in loss the privacy and confidentiality of files. Whilst today's use of third-party cryptographic applications can independently encrypt data, it arguably places a significant burden upon the user in terms of manually ciphering/deciphering each file and administering numerous keys in addition to the login password. The field of biometric cryptography applies biometric modalities within cryptography to produce robust bio-crypto keys without having to remember them. There are, nonetheless, still specific flaws associated with the security of the established bio-crypto key and its usability. Users currently should present their biometric modalities intrusively each time a file needs to be encrypted/decrypted – thus leading to cumbersomeness and inconvenience while throughout usage. Transparent biometrics seeks to eliminate the explicit interaction for verification and thereby remove the user inconvenience. However, the application of transparent biometric within bio-cryptography can increase the variability of the biometric sample leading to further challenges on reproducing the bio-crypto key. An innovative bio-cryptographic approach is developed to non-intrusively encrypt/decrypt data by a bio-crypto key established from transparent biometrics on the fly without storing it somewhere using a backpropagation neural network. This approach seeks to handle the shortcomings of the password login, and concurrently removes the usability issues of the third-party cryptographic applications – thus enabling a more secure and usable user-oriented level of encryption to reinforce the security controls within cloud-based storage. The challenge represents the ability of the innovative bio-cryptographic approach to generate a reproducible bio-crypto key by selective transparent biometric modalities including fingerprint, face and keystrokes which are inherently noisier than their traditional counterparts. Accordingly, sets of experiments using functional and practical datasets reflecting a transparent and unconstrained sample collection are conducted to determine the reliability of creating a non-intrusive and repeatable bio-crypto key of a 256-bit length. With numerous samples being acquired in a non-intrusive fashion, the system would be spontaneously able to capture 6 samples within minute window of time. There is a possibility then to trade-off the false rejection against the false acceptance to tackle the high error, as long as the correct key can be generated via at least one successful sample. As such, the experiments demonstrate that a correct key can be generated to the genuine user once a minute and the average FAR was 0.9%, 0.06%, and 0.06% for fingerprint, face, and keystrokes respectively. For further reinforcing the effectiveness of the key generation approach, other sets of experiments are also implemented to determine what impact the multibiometric approach would have upon the performance at the feature phase versus the matching phase. Holistically, the multibiometric key generation approach demonstrates the superiority in generating the bio-crypto key of a 256-bit in comparison with the single biometric approach. In particular, the feature-level fusion outperforms the matching-level fusion at producing the valid correct key with limited illegitimacy attempts in compromising it – 0.02% FAR rate overall. Accordingly, the thesis proposes an innovative bio-cryptosystem architecture by which cloud-independent encryption is provided to protect the users' personal data in a more reliable and usable fashion using non-intrusive multimodal biometrics.Higher Committee of Education Development in Iraq (HCED

Biometric Spoofing: A JRC Case Study in 3D Face Recognition

Based on newly available and affordable off-the-shelf 3D sensing, processing and printing technologies, the JRC has conducted a comprehensive study on the feasibility of spoofing 3D and 2.5D face recognition systems with low-cost self-manufactured models and presents in this report a systematic and rigorous evaluation of the real risk posed by such attacking approach which has been complemented by a test campaign. The work accomplished and presented in this report, covers theories, methodologies, state of the art techniques, evaluation databases and also aims at providing an outlook into the future of this extremely active field of research.JRC.G.6-Digital Citizen Securit