Avoiding space robot collisions utilizing the NASA/GSFC tri-mode skin sensor

Sensor based robot motion planning research has primarily focused on mobile robots. Consider, however, the case of a robot manipulator expected to operate autonomously in a dynamic environment where unexpected collisions can occur with many parts of the robot. Only a sensor based system capable of generating collision free paths would be acceptable in such situations. Recently, work in this area has been reported in which a deterministic solution for 2DOF systems has been generated. The arm was sensitized with 'skin' of infra-red sensors. We have proposed a heuristic (potential field based) methodology for redundant robots with large DOF's. The key concepts are solving the path planning problem by cooperating global and local planning modules, the use of complete information from the sensors and partial (but appropriate) information from a world model, representation of objects with hyper-ellipsoids in the world model, and the use of variational planning. We intend to sensitize the robot arm with a 'skin' of capacitive proximity sensors. These sensors were developed at NASA, and are exceptionally suited for the space application. In the first part of the report, we discuss the development and modeling of the capacitive proximity sensor. In the second part we discuss the motion planning algorithm

Collision-free motion of two robot arms in a common workspace

Collision-free motion of two robot arms in a common workspace is investigated. A collision-free motion is obtained by detecting collisions along the preplanned trajectories using a sphere model for the wrist of each robot and then modifying the paths and/or trajectories of one or both robots to avoid the collision. Detecting and avoiding collisions are based on the premise that: preplanned trajectories of the robots follow a straight line; collisions are restricted to between the wrists of the two robots (which corresponds to the upper three links of PUMA manipulators); and collisions never occur between the beginning points or end points on the straight line paths. The collision detection algorithm is described and some approaches to collision avoidance are discussed

Collision-free path planning

Motion planning is an important challenge in robotics research. Efficient generation of collision-free motion is a fundamental capability necessary for autonomous robots;In this dissertation, a fast and practical algorithm for moving a convex polygonal robot among a set of polygonal obstacles with translations and rotations is presented. The running time is O(c((n + k)N + nlogn)), where c is a parameter controlling the precision of the results, n is the total number of obstacle vertices, k is the number of intersections of configuration space obstacles, and N is the number of obstacles, decomposed into convex objects. This dissertation exploits a simple 3D passage-network to incorporate robot rotations as an alternative to complex cell decomposition techniques or building passage networks on approximated 3D C-space obstacles;A common approach in path planning is to compute the Minkowski difference of a polygonal robot model with the polygonal obstacle environment. However such a configuration space is valid only for a single robot orientation. In this research, multiple configuration spaces are computed between the obstacle environment and the robot at successive angular orientations spanning [pi] . Although the obstacles do not intersect, each configuration space may contain intersecting configuration space obstacles (C-space obstacles). For each configuration space, the algorithm finds the contour of the intersected C-space obstacles and the associated passage network by slabbing the collision-free space. The individual configuration spaces are then related to one another by a heuristic called proper links that exploit spatial coherence. Thus, each level is connected to the adjacent levels by proper links to construct a 3D network. Dijkstra\u27s algorithm is used to search for the shortest path in the 3D network. Finally, the path is projected onto the plane to show the final locus of the path