267 research outputs found
The State-of-the-art of Coordinated Ramp Control with Mixed Traffic Conditions
Ramp metering, a traditional traffic control strategy for conventional
vehicles, has been widely deployed around the world since the 1960s. On the
other hand, the last decade has witnessed significant advances in connected and
automated vehicle (CAV) technology and its great potential for improving
safety, mobility and environmental sustainability. Therefore, a large amount of
research has been conducted on cooperative ramp merging for CAVs only. However,
it is expected that the phase of mixed traffic, namely the coexistence of both
human-driven vehicles and CAVs, would last for a long time. Since there is
little research on the system-wide ramp control with mixed traffic conditions,
the paper aims to close this gap by proposing an innovative system architecture
and reviewing the state-of-the-art studies on the key components of the
proposed system. These components include traffic state estimation, ramp
metering, driving behavior modeling, and coordination of CAVs. All reviewed
literature plot an extensive landscape for the proposed system-wide coordinated
ramp control with mixed traffic conditions.Comment: 8 pages, 1 figure, IEEE INTELLIGENT TRANSPORTATION SYSTEMS CONFERENCE
- ITSC 201
Vision-Based Lane-Changing Behavior Detection Using Deep Residual Neural Network
Accurate lane localization and lane change detection are crucial in advanced
driver assistance systems and autonomous driving systems for safer and more
efficient trajectory planning. Conventional localization devices such as Global
Positioning System only provide road-level resolution for car navigation, which
is incompetent to assist in lane-level decision making. The state of art
technique for lane localization is to use Light Detection and Ranging sensors
to correct the global localization error and achieve centimeter-level accuracy,
but the real-time implementation and popularization for LiDAR is still limited
by its computational burden and current cost. As a cost-effective alternative,
vision-based lane change detection has been highly regarded for affordable
autonomous vehicles to support lane-level localization. A deep learning-based
computer vision system is developed to detect the lane change behavior using
the images captured by a front-view camera mounted on the vehicle and data from
the inertial measurement unit for highway driving. Testing results on
real-world driving data have shown that the proposed method is robust with
real-time working ability and could achieve around 87% lane change detection
accuracy. Compared to the average human reaction to visual stimuli, the
proposed computer vision system works 9 times faster, which makes it capable of
helping make life-saving decisions in time
Recommended from our members
Development of Eco-Friendly Ramp Control for Connected and Automated Electric Vehicles
With on-board sensors such as camera, radar, and Lidar, connected and automated vehicles (CAVs) can sense the surrounding environment and be driven autonomously and safely by themselves without colliding into other objects on the road. CAVs are also able to communicate with each other and roadside infrastructure via vehicle-to-vehicle and vehicle-to-infrastructure communications, respectively, sharing information on the vehiclesâ states, signal phase and timing (SPaT) information, enabling CAVs to make decisions in a collaborative manner. As a typical scenario, ramp control attracts wide attention due to the concerns of safety and mobility in the merging area. In particular, if the line-of-the-sight is blocked (because of grade separation), then neither mainline vehicles nor on-ramp vehicles may well adapt their own dynamics to perform smoothed merging maneuvers. This may lead to speed fluctuations or even shockwave propagating upstream traffic along the corridor, thus potentially increasing the traffic delays and excessive energy consumption. In this project, the research team proposed a hierarchical ramp merging system that not only allowed microscopic cooperative maneuvers for connected and automated electric vehicles on the ramp to merge into mainline traffic flow, but also had controllability of ramp inflow rate, which enabled macroscopic traffic flow control. A centralized optimal control-based approach was proposed to both smooth the merging flow and improve the system-wide mobility of the network. Linear quadratic trackers in both finite horizon and receding horizon forms were developed to solve the optimization problem in terms of path planning and sequence determination, and a microscopic electric vehicle (EV) energy consumption model was applied to estimate the energy consumption. The simulation results confirmed that under the regulated inflow rate, the proposed system was able to avoid potential traffic congestion and improve the mobility (in terms of average speed) as much as 115%, compared to the conventional ramp metering and the ramp without any control approach. Interestingly, for EVs (connected and automated EVs in this study), the improved mobility may not necessarily result in the reduction of energy consumption. The âsweet spotâ of average speed ranges from 27â34 mph for the EV models in this study.View the NCST Project Webpag
Penetration effect of connected and automated vehicles on cooperative onâramp merging
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/166263/1/itr2bf00795.pd
Coordination and Analysis of Connected and Autonomous Vehicles in Freeway On-Ramp Merging Areas
Freeway on-ramps are typical bottlenecks in the freeway network, where the merging maneuvers of ramp vehicles impose frequent disturbances on the traffic flow and cause negative impacts on traffic safety and efficiency. The emerging Connected and Autonomous Vehicles (CAVs) hold the potential for regulating the behaviors of each individual vehicle and are expected to substantially improve the traffic operation at freeway on-ramps. The aim of this research is to explore the possibilities of optimally facilitating freeway on-ramp merging operation through the coordination of CAVs, and to discuss the impacts of CAVs on the traffic performance at on-ramp merging.In view of the existing research efforts and gaps in the field of CAV on-ramp merging operation, a novel CAV merging coordination strategy is proposed by creating large gaps on the main road and directing the ramp vehicles into the created gaps in the form of platoon. The combination of gap creation and platoon merging jointly facilitates the mainline and ramp traffic and targets at the optimal performance at the traffic flow level. The coordination consists of three components: (1) mainline vehicles proactively decelerate to create large merging gaps; (2) ramp vehicles form platoons before entering the main road; (3) the gaps created on the main road and the platoons formed on the ramp are coordinated with each other in terms of size, speed, and arrival time. The coordination is analytically formulated as an optimization problem, incorporating the macroscopic and microscopic traffic flow models. The model uses traffic state parameters as inputs and determines the optimal coordination plan adaptive to real-time traffic conditions.The impacts of CAV coordination strategies on traffic efficiency are investigated through illustrative case studies conducted on microscopic traffic simulation platforms. The results show substantial improvements in merging efficiency, throughput, and traffic flow stability. In addition, the safety benefits of CAVs in the absence of specially designed cooperation strategies are investigated to reveal the CAVâs ability to eliminate critical human factors in the ramp merging process
2nd Symposium on Management of Future motorway and urban Traffic Systems (MFTS 2018): Booklet of abstracts: Ispra, 11-12 June 2018
The Symposium focuses on future traffic management systems, covering the subjects of traffic control, estimation, and modelling of motorway and urban networks, with particular emphasis on the presence of advanced vehicle communication and automation technologies.
As connectivity and automation are being progressively introduced in our transport and mobility systems, there is indeed a growing need to understand the implications and opportunities for an enhanced traffic management as well as to identify innovative ways and tools to optimise traffic efficiency.
In particular the debate on centralised versus decentralised traffic management in the presence of connected and automated vehicles has started attracting the attention of the research community.
In this context, the Symposium provides a remarkable opportunity to share novel ideas and discuss future research directions.JRC.C.4-Sustainable Transpor
A Rule Based Control Algorithm for on-Ramp Merge With Connected and Automated Vehicles
One of the designs for future highways with the flow of Connected Automated Vehicles (CAVs) cars will be a dedicated lane for the CAVs to form platoons and travel with higher speeds and lower headways. The connectivity will enable the formation of platoons of CAVs traveling beside non-platoon lanes. The advent of connectivity between vehicles and the infrastructure will enable advanced control strategies ̶ improving the performance of the traffic ̶ to be incorporated in the traffic system. The merge area in a multilane highway with CAVs is one of the sections which can be enhanced by the operation of a control system.
In this research, a model is developed for investigating the effects of a Rule Based control strategy yielding a more efficient and systematic method for the vehicles joining the highway mainlines comprised of platoon and non-platoon lanes. The actions tested for assisting the merge process included deceleration in the mainlines and lane change to join a platoon in the platoon lane. The model directs every CAV entering a multi-lane highway from an on-ramp, to the rightmost lane of the highway based on the appropriate action which is selected according to the traffic demand conditions and location of the on-ramp vehicle. To account for car following behavior, the vehicles in the platoon lanes are assumed to have a simplified CACC (cooperative adaptive cruise control) and those in the non-platoon lanes the IDM+ car-following model. The IDM+ car following model is modified with additional controls to incorporate the current technologies of Advanced Driver Assistant Systems (ADAS).
The results of this study showed that the proposed car following model can increase the throughput of the non-platoon lane from approximately 2000 vehicle per hour (vph) to 3400 vph while the platoon lanes each had an average throughput of 3500 vph. The merge model enabled higher merging throughput for the merge area compared to current day conditions and displayed the potential for improved traffic performance in a connected environment comprised of platoon and non-platoon lanes. The results of this research will help in the design and development of advanced systems for controlling on-ramp merge sections in the future with CAVs
Recommended from our members
A Survey on Cooperative Longitudinal Motion Control of Multiple Connected and Automated Vehicles
- âŠ