Medium Access Control Protocols for Ad-Hoc Wireless Networks: A Survey

Studies of ad hoc wireless networks are a relatively new field gaining more popularity for various new applications. In these networks, the Medium Access Control (MAC) protocols are responsible for coordinating the access from active nodes. These protocols are of significant importance since the wireless communication channel is inherently prone to errors and unique problems such as the hidden-terminal problem, the exposed-terminal problem, and signal fading effects. Although a lot of research has been conducted on MAC protocols, the various issues involved have mostly been presented in isolation of each other. We therefore make an attempt to present a comprehensive survey of major schemes, integrating various related issues and challenges with a view to providing a big-picture outlook to this vast area. We present a classification of MAC protocols and their brief description, based on their operating principles and underlying features. In conclusion, we present a brief summary of key ideas and a general direction for future work

A TDMA-based bandwidth reservation protocol for QoS routing in a wireless mobile ad hoc network

[[abstract]]This paper considers the bandwidth reservation problem in a mobile ad hoc network (MANET) to support QoS (quality-of-service) routing. We approach this problem by assuming a common channel shared by all hosts under a TDMA (time division multiple access) channel model. Existing solutions have addressed this problem by assuming a stronger multi-antenna model, where the bandwidth of a link is independent of the transmitting/receiving activities of its neighboring links, or a less strong CDMA-over-TDMA channel model, where the use of a time slot on a link is only dependent on the status of its one-hop neighboring links. While more practical and less costly, using a TDMA model needs to face the challenge of radio interference problems. In this paper, we propose a new protocol that can reserve routes by addressing both the hidden-terminal and exposed-terminal problems. The protocol can conduct accurate bandwidth calculation while performing route discovery. Simulation results are presented to verify how this new protocol performs.[[conferencetype]]國際[[conferencedate]]20020428~20020502[[booktype]]紙本[[conferencelocation]]New York, NY, US

Medium access control design for all-IP and ad hoc wireless network

Medium Access Control (MAC) protocol in a wireless network controls the access of wireless medium by mobile terminals, in order to achieve its fair and efficient sharing. It plays an important role in resource management and QoS support for applications. All-IP wireless WAN is fully IP protocol-based and it is a strong candidate beyond 3G (Third Generation Wireless Network). Ad hoc wireless network has recently been the topic of extensive research due to its ability to work properly without fixed infrastructure. This dissertation is composed of two main parts. The first part pursues a Prioritized Parallel Transmission MAC (PPTM) design for All-IP Wireless WAN. Two stages are used and each packet is with a priority level in PPTM. In stage 1, a pretransmission probability is calculated according to the continuous observation of the channel load for a certain period of time. In stage 2, a packet is prioritized and transmitted accordingly. It is modeled and analyzed as a nonpreemptive Head-Of-the-Line prioritized queueing system with Poisson arrival traffic pattern. Its performance is analyzed under three other traffic patterns, which are Constant Bit Rate, Exponential On/Off, and Pareto On/Off, by using a NS-2 simulator, and compared with that of Modified Channel Load Sensing Protocol. PPTM supports dynamic spread code allocation mechanism. A mobile terminal can apply for a spreading code according to the current channel condition. To use the idea of dynamic bandwidth allocation in PPTM for adhoc wireless network, a Dynamic-Rate-with-Collision-Avoidance (DRCA) MAC protocol is proposed in the second part of the dissertation. DRCA is based on spread spectrum technology. In DRCA, a terminal sets the spreading factor for a packet according to the activity level of neighboring nodes. If the total number of usable spreading codes with this spreading factor is less than the total number of mobile terminals in the network, to avoid collision, the spreading code id is broadcast such that other terminals can avoid using it when the packet is being transmitted. The performance of DRCA is theoretically analyzed in a slotted, single-hop, multi-user environment. To evaluate DRCA\u27s performance in an environment closed to a real one, a simulator that supports multi-hop, random mobility pattern is created with OPNET. Both theoretical and simulation results show that DRCA outperforms MACA/CT (Multiple Access with Collision Avoidance with Common Transmitter-based) in case if there are more than one communication pair and the ratio of inactive mobile terminals to active ones is high

Airborne Directional Networking: Topology Control Protocol Design

This research identifies and evaluates the impact of several architectural design choices in relation to airborne networking in contested environments related to autonomous topology control. Using simulation, we evaluate topology reconfiguration effectiveness using classical performance metrics for different point-to-point communication architectures. Our attention is focused on the design choices which have the greatest impact on reliability, scalability, and performance. In this work, we discuss the impact of several practical considerations of airborne networking in contested environments related to autonomous topology control modeling. Using simulation, we derive multiple classical performance metrics to evaluate topology reconfiguration effectiveness for different point-to-point communication architecture attributes for the purpose of qualifying protocol design elements

Improving the Performance of Medium Access Control Protocols for Mobile Adhoc Network with Smart Antennas

Requirements for high quality links and great demand for high throughput in Wireless LAN especially Mobile Ad-hoc Network has motivated new enhancements and work in Wireless communications such as Smart Antenna Systems. Smart (adaptive) Antennas enable spatial reuse, increase throughput and they increase the communication range because of the increase directivity of the antenna array. These enhancements quantified for the physical layer may not be efficiently utilized, unless the Media Access Control (MAC) layer is designed accordingly. This thesis implements the behaviours of two MAC protocols, ANMAC and MMAC protocols in OPNET simulator. This method is known as the Physical-MAC layer simulation model. The entire physical layer is written in MATLAB, and MATLAB is integrated into OPNET to perform the necessary stochastic physical layer simulations. The aim is to investigate the performance improvement in throughput and delay of the selected MAC Protocols when using Smart Antennas in a mobile environment. Analytical methods were used to analyze the average throughput and delay performance of the selected MAC Protocols with Adaptive Antenna Arrays in MANET when using spatial diversity. Comparison study has been done between the MAC protocols when using Switched beam antenna and when using the proposed scheme. It has been concluded that the throughput and delay performance of the selected protocols have been improved by the use of Adaptive Antenna Arrays. The throughput and delay performance of ANMAC-SW and ANMAC-AA protocols was evaluated in details against regular Omni 802.11 stations. Our results promise significantly enhancement over Omni 802.11, with a throughput of 25% for ANMAC-SW and 90% for ANMC-AA. ANMAC-AA outperforms ANMAC-SW protocol by 60%. Simulation experiments indicate that by using the proposed scheme with 4 Adaptive Antenna Array per a node, the average throughput in the network can be improved up to 2 to 2.5 times over that obtained by using Switched beam Antennas. The proposed scheme improves the performances of both ANMAC and MMAC protocols but ANMAC outperforms MMAC by 30%

Mobile Ad hoc Networking: Imperatives and Challenges

Mobile ad hoc networks (MANETs) represent complex distributed systems that comprise wireless mobile nodes that can freely and dynamically self-organize into arbitrary and temporary, "ad-hoc" network topologies, allowing people and devices to seamlessly internetwork in areas with no pre-existing communication infrastructure, e.g., disaster recovery environments. Ad hoc networking concept is not a new one, having been around in various forms for over 20 years. Traditionally, tactical networks have been the only communication networking application that followed the ad hoc paradigm. Recently, the introduction of new technologies such as the Bluetooth, IEEE 802.11 and Hyperlan are helping enable eventual commercial MANET deployments outside the military domain. These recent evolutions have been generating a renewed and growing interest in the research and development of MANET. This paper attempts to provide a comprehensive overview of this dynamic field. It first explains the important role that mobile ad hoc networks play in the evolution of future wireless technologies. Then, it reviews the latest research activities in these areas, including a summary of MANET\u27s characteristics, capabilities, applications, and design constraints. The paper concludes by presenting a set of challenges and problems requiring further research in the future

On Improving Network Connectivity by Power-Control and Code-Switching Schemes for Multihop Packet Radio Networks

[[abstract]]Packet radio network (PRN) consists of low or even no mobility stations each assigned with a code to prevent transmission from collision. A PRN with strong connectivity will help to reduce the route length and provide more alternatives for routing, improving the overall throughput and end-to-end delay. With power control mechanism, each station could be assigned with a power level to change the neighborhood relation and improve network connectivity. Assigning high transmitting power level to a station can enhance the network connectivity but may increase the number of neighbors, raising collision problem for parallel transmissions among neighbors. How to assign appropriate power level to improve the network connectivity with a constraint of limited codes is one of the most important issues in PRNs. Given a network topology and a set of codes that has been assigned to stations, the proposed power control and code switching mechanism assigns each station with a power level and a code to improve the network connectivity. Based on the matrix-based operation, the power control and code switching metrics in network connectivity problem are generally identified and efficiently resolved. Simulation study reveals that the proposed mechanism increases network throughput and provides a variety of route selection thus improves the performance of a given PRN.[[conferencetype]]國際[[conferencedate]]20050613~20050616[[iscallforpapers]]Y[[conferencelocation]]Hawaii, United State