Physical Design and Clock Tree Synthesis Methods For A 8-Bit Processor

Now days a number of processors are available with a lot kind of feature from different industries. A processor with similar kind of architecture of the current processors only missing the memory stuffs like the RAM and ROM has been designed here with the help of Verilog style of coding. This processor contains architecturally the program counter, instruction register, ALU, ALU latch, General Purpose Registers, control state module, flag registers and the core module containing all the modules. And a test module is designed for testing the processor. After the design of the processor with successful functionality, the processor is synthesized with 180nm technology. The synthesis is performed with the data path optimization like the selection of proper adders and multipliers for timing optimization in the data path while the ALU operations are performed. During synthesis how to take care of the worst negative slack (WNS), how to include the clock gating cells, how to define the cost and path groups etc. have been covered. After the proper synthesis we get the proper net list and the synthesized constraint file for carrying out the physical design. In physical design the steps like floor-planning, partitioning, placement, legalization of the placement, clock tree synthesis, and routing etc. have been performed. At all the stages the static timing analysis is performed for the timing meet of the design for better performance in terms of timing or frequency. Each steps of physical design are discussed with special effort towards the concepts behind the step. Out of all the steps of physical design the clock tree synthesis is performed with some improvement in the performance of the clock tree by creating a symmetrical clock tree and maintaining more common clock paths. A special algorithm has been framed for creating a symmetrical clock tree and thereby making the power consumption of the clock tree low

Course grained low power design flow using UPF

Increased system complexity has led to the substitution of the traditional bottom-up design flow by systematic hierarchical design flow. The main motivation behind the evolution of such an approach is the increasing difficulty in hardware realization of complex systems. With decreasing channel lengths, few key problems such as timing closure, design sign-off, routing complexity, signal integrity, and power dissipation arise in the design flows. Specifically, minimizing power dissipation is critical in several high-end processors. In high-end processors, the design complexity contributes to the overall dynamic power while the decreasing transistor size results in static power dissipation. This research aims at optimizing the design flow for power and timing using the unified power format (UPF). UPF provides a strategic format to specify power-aware design information at every stage in the flow. The low power reduction techniques enforced in this research are multi-voltage, multi-threshold voltage (Vth), and power gating with state retention. An inherent design challenge addressed in this research is the choice of power optimization techniques as the flow advances from synthesis to physical design. A top-down digital design flow for a 32 bit MIPS RISC processor has been implemented with and without UPF synthesis flow for 65nm technology. The UPF synthesis is implemented with two voltages, 1.08V and 0.864V (Multi-VDD). Area, power and timing metrics are analyzed for the flows developed. Power savings of about 20 % are achieved in the design flow with \u27multi-threshold\u27 power technique compared to that of the design flow with no low power techniques employed. Similarly, 30 % power savings are achieved in the design flow with the UPF implemented when compared to that of the design flow with \u27multi-threshold\u27 power technique employed. Thus, a cumulative power savings of 42% has been achieved in a complete power efficient design flow (UPF) compared to that of the generic top-down standard flow with no power saving techniques employed. This is substantiated by the low voltage operation of modules in the design, reduction in clock switching power by gating clocks in the design and extensive use of HVT and LVT standard cells for implementation. The UPF synthesis flow saw the worst timing slack and more area when compared to those of the `multi-threshold\u27 or the generic flow. Percentage increase in the area with UPF is approximately 15%; a significant source for this increase being the additional power controlling logic added

Clock Distribution Network Building Algorithm For Multiple Ips In System On A Chip

In this project, an algorithm is proposed and developed to build the global CDN that is used to distribute the clocks to all partitions in the SoC using the channels available between partitions. The conventional method of building the global CDN involves manual interventions which decrease the global CDN building efficiency and increase the overall SoC design cycle. To solve this issue, an algorithm is proposed to automate the global CDN building process and at the same time obtain a balanced overall CDN not achieved by the conventional method. Other researches have proposed different CDN structures to simplify the design process but the proposals often sacrifice placement resources to achieve this. The algorithm first collects the partition clock latency numbers and other constraints needed as setup. When the setup is done, the global CDN is build and routed. The algorithm checks for clock skew and scenic routing issues before proceeding to shield the global CDN to prevent cross-talk issues. The algorithm is done when a final checking on the clock skew is done. The algorithm is tested on two different floorplans with varying size and available channels using three different clocks for each floorplan to ensure the accuracy of the algorithm. Finally, the global CDN build using the algorithm is evaluated based on the time needed to build the global CDN and the clock buffer numbers and areas used. The algorithm is shown to be able to reduce 50% of the global CDN design cycle and save 5% of clock buffer numbers and areas. The improvement achieved by the algorithm in this project shows the efficiency in designing the global CDN improved tremendously compared to conventional method

Technology independent ASIC based time to digital converter

This paper proposes a design methodology for a synthesizable, fully digital TDC architecture. The TDC was implemented using a hardware description language (HDL), which improves portability between platforms and technologies and significantly reduces design time. The proposed design flow is fully automated using TCL scripting and standard CAD tools configuration files. The TDC is based on a Tapped Delay Line architecture and explores the use of Structured Data Path (SDP) as a way to improve the TDL linearity by homogenizing the routing and parasitic capacitances across the multiple TDL’s steps. The studied approach also secures a stable, temperature independent measurement operation. The proposed TDC architecture was fabricated using TSMC 180nm CMOS process technology, with a 50MHz reference clock and a supply voltage of 1.8V. The fabricated TDC achieved an 111ps RMS resolution and a single-shot precision of 54ps (0.48 LSB) and 279ps (2.51 LSB), with and without post-measurement software calibration, respectively. The DNL across the channel is mostly under 0.3 LSB and a maximum of 8 LSB peak-to-peak INL was achieved, when no calibration is applied.- (037902

All-digital time-to-digital converter design methodology based on structured data paths

Time-to-Digital Converters (TDC) are popular circuits in many applications, where high resolution time measurements are required, for example, in Positron Emission Tomography (PET). Besides its resolution, the TDC's linearity is also an important performance indicator, therefore calibration circuits usually play an important role on TDCs architectures. This paper presents an all-digital TDC implemented using Structured Datapath to reduce the need for calibration circuitry and cells custom design, without compromising the TDC's linearity. The proposed design is fully implementable using a Hardware Description Language (HDL) and enables a complete design flow automation, reducing both development time and system's complexity. The TDC is based on a Delay Locked Loop (DLL) paired with a coarse counter to increase measurement range. The proposed architecture and the design approach have proven to be efficient in developing a high resolution TDC with high linearity. The proposed TDC was implemented in TSMC 0.18 μm CMOS technology process achieving a resolution of 180ps, with Differential Non-Linearity (DNL) and Integral Non-Linearity (INL) under 0.6 LSB.FRCT - Fundo Regional para a Ciência e Tecnologia(PDE/BDE/114562/2016

Physical design of USB1.1

In earlier days, interfacing peripheral devices to host computer has a big problematic. There existed so many different kinds’ ports like serial port, parallel port, PS/2 etc. And their use restricts many situations, Such as no hot-pluggability and involuntary configuration. There are very less number of methods to connect the peripheral devices to host computer. The main reason that Universal Serial Bus was implemented to provide an additional benefits compared to earlier interfacing ports. USB is designed to allow many peripheral be connecting using single standardize interface. It provides an expandable fast, cost effective, hot-pluggable plug and play serial hardware interface that makes life of computer user easier allowing them to plug different devices to into USB port and have them configured automatically. In this thesis demonstrated the USB v1.1 architecture part in briefly and generated gate level net list form RTL code by applying the different constraints like timing, area and power. By applying the various types design constraints so that the performance was improved by 30%. And then it implemented in physically by using SoC encounter EDI system, estimation of chip size, power analysis and routing the clock signal to all flip-flops presented in the design. To reduce the clock switching power implemented register clustering algorithm (DBSCAN). In this design implementation TSMC 180nm technology library is used

Some Applications of the Weighted Combinatorial Laplacian

The weighted combinatorial Laplacian of a graph is a symmetric matrix which is the discrete analogue of the Laplacian operator. In this thesis, we will study a new application of this matrix to matching theory yielding a new characterization of factor-criticality in graphs and matroids. Other applications are from the area of the physical design of very large scale integrated circuits. The placement of the gates includes the minimization of a quadratic form given by a weighted Laplacian. A method based on the dual constrained subgradient method is proposed to solve the simultaneous placement and gate-sizing problem. A crucial step of this method is the projection to the flow space of an associated graph, which can be performed by minimizing a quadratic form given by the unweighted combinatorial Laplacian.Andwendungen der gewichteten kombinatorischen Laplace-Matrix Die gewichtete kombinatorische Laplace-Matrix ist das diskrete Analogon des Laplace-Operators. In dieser Arbeit stellen wir eine neuartige Charakterisierung von Faktor-Kritikalität von Graphen und Matroiden mit Hilfe dieser Matrix vor. Wir untersuchen andere Anwendungen im Bereich des Entwurfs von höchstintegrierten Schaltkreisen. Die Platzierung basiert auf der Minimierung einer quadratischen Form, die durch eine gewichtete kombinatorische Laplace-Matrix gegeben ist. Wir präsentieren einen Algorithmus für das allgemeine simultane Platzierungs- und Gattergrößen-Optimierungsproblem, der auf der dualen Subgradientenmethode basiert. Ein wichtiger Bestandteil dieses Verfahrens ist eine Projektion auf den Flussraum eines assoziierten Graphen, die als die Minimierung einer durch die Laplace-Matrix gegebenen quadratischen Form aufgefasst werden kann

Enhancing Power Efficient Design Techniques in Deep Submicron Era

Excessive power dissipation has been one of the major bottlenecks for design and manufacture in the past couple of decades. Power efficient design has become more and more challenging when technology scales down to the deep submicron era that features the dominance of leakage, the manufacture variation, the on-chip temperature variation and higher reliability requirements, among others. Most of the computer aided design (CAD) tools and algorithms currently used in industry were developed in the pre deep submicron era and did not consider the new features explicitly and adequately. Recent research advances in deep submicron design, such as the mechanisms of leakage, the source and characterization of manufacture variation, the cause and models of on-chip temperature variation, provide us the opportunity to incorporate these important issues in power efficient design. We explore this opportunity in this dissertation by demonstrating that significant power reduction can be achieved with only minor modification to the existing CAD tools and algorithms. First, we consider peak current, which has become critical for circuit's reliability in deep submicron design. Traditional low power design techniques focus on the reduction of average power. We propose to reduce peak current while keeping the overhead on average power as small as possible. Second, dual Vt technique and gate sizing have been used simultaneously for leakage savings. However, this approach becomes less effective in deep submicron design. We propose to use the newly developed process-induced mechanical stress to enhance its performance. Finally, in deep submicron design, the impact of on-chip temperature variation on leakage and performance becomes more and more significant. We propose a temperature-aware dual Vt approach to alleviate hot spots and achieve further leakage reduction. We also consider this leakage-temperature dependency in the dynamic voltage scaling approach and discover that a commonly accepted result is incorrect for the current technology. We conduct extensive experiments with popular design benchmarks, using the latest industry CAD tools and design libraries. The results show that our proposed enhancements are promising in power saving and are practical to solve the low power design challenges in deep submicron era