Future Energy Efficient Data Centers With Disaggregated Servers

The popularity of the Internet and the demand for 24/7 services uptime is driving system performance and reliability requirements to levels that today's data centers can no longer support. This paper examines the traditional monolithic conventional server (CS) design and compares it to a new design paradigm: the disaggregated server (DS) data center design. The DS design arranges data centers resources in physical pools, such as processing, memory, and IO module pools, rather than packing each subset of such resources into a single server box. In this paper, we study energy efficient resource provisioning and virtual machine (VM) allocation in DS-based data centers compared to CS-based data centers. First, we present our new design for the photonic DS-based data center architecture, supplemented with a complete description of the architectural components. Second, we develop a mixed integer linear programming (MILP) model to optimize VM allocation for the DS-based data center, including the data center communication fabric power consumption. Our results indicate that, in DS data centers, the optimum allocation of pooled resources and their communication power yields up to 42% average savings in total power consumption when compared with the CS approach. Due to the MILP high computational complexity, we developed an energy efficient resource provisioning heuristic for DS with communication fabric (EERP-DSCF), based on the MILP model insights, with comparable power efficiency to the MILP model. With EERP-DSCF, we can extend the number of served VMs, where the MILP model scalability for a large number of VMs is challenging. Furthermore, we assess the energy efficiency of the DS design under stringent conditions by increasing the CPU to memory traffic and by including high noncommunication power consumption to determine the conditions at which the DS and CS designs become comparable in power consumption. Finally, we present a complete analysis of the communication patterns in our new DS design and some recommendations for design and implementation challenges

Space station common module network topology and hardware development

Conceptual space station common module power management and distribution (SSM/PMAD) network layouts and detailed network evaluations were developed. Individual pieces of hardware to be developed for the SSM/PMAD test bed were identified. A technology assessment was developed to identify pieces of equipment requiring development effort. Equipment lists were developed from the previously selected network schematics. Additionally, functional requirements for the network equipment as well as other requirements which affected the suitability of specific items for use on the Space Station Program were identified. Assembly requirements were derived based on the SSM/PMAD developed requirements and on the selected SSM/PMAD network concepts. Basic requirements and simplified design block diagrams are included. DC remote power controllers were successfully integrated into the DC Marshall Space Flight Center breadboard. Two DC remote power controller (RPC) boards experienced mechanical failure of UES 706 stud-mounted diodes during mechanical installation of the boards into the system. These broken diodes caused input to output shorting of the RPC's. The UES 706 diodes were replaced on these RPC's which eliminated the problem. The DC RPC's as existing in the present breadboard configuration do not provide ground fault protection because the RPC was designed to only switch the hot side current. If ground fault protection were to be implemented, it would be necessary to design the system so the RPC switched both the hot and the return sides of power

An in-band full-duplex radio receiver with a passive vector modulator downmixer for self-interference cancellation

In-band full-duplex (FD) wireless, i.e., simultaneous transmission and reception at the same frequency, introduces strong self-interference (SI) that masks the signal to be received. This paper proposes a receiver in which a copy of the transmit signal is fed through a switched-resistor vector modulator (VM)that provides simultaneous downmixing, phase shift, and amplitude scaling and subtracts it in the analog baseband for up to 27 dB SI-cancellation. Cancelling before active baseband amplification avoids self-blocking, and highly linear mixers keep SIinduced distortion low, for a receiver SI-to-noise-and-distortionratio (SINDR) of up to 71.5 dB in 16.25 MHz BW. When combined with a two-port antenna with only 20 dB isolation, the low RX distortion theoretically allows sufficient digital cancellation for over 90 dB link budget, sufficient for short-range, low-power FD links

A concatenated coding scheme for error control

A concatenated coding scheme for error contol in data communications was analyzed. The inner code is used for both error correction and detection, however the outer code is used only for error detection. A retransmission is requested if either the inner code decoder fails to make a successful decoding or the outer code decoder detects the presence of errors after the inner code decoding. Probability of undetected error of the proposed scheme is derived. An efficient method for computing this probability is presented. Throughout efficiency of the proposed error control scheme incorporated with a selective repeat ARQ retransmission strategy is analyzed

The phase of the crosspolarized signal generated by millimeter wave propagation through rain

Proposed schemes for cancelling rain-induced crosstalk in dual-polarized communications systems depend upon the phase relationships between the wanted and unwanted signals. This report investigates the phase relationship of the rain-generated crosspolarized signal relative to the copolarized signal. Theoretical results obtained from a commonly accepted propagation model are presented. Experimental data from the Communications Technology Satellite beacon and from the Comstar beacon are presented and the correlation between theory and data is discussed. An inexpensive semi-adaptive cancellation system is proposed and its performance expectations are presented. The implications of phase variations on a cancellation system are also discussed