Letter from the Special Issue Editor

Editorial work for DEBULL on a special issue on data management on Storage Class Memory (SCM) technologies

Dynamic Binary Translation for Embedded Systems with Scratchpad Memory

Embedded software development has recently changed with advances in computing. Rather than fully co-designing software and hardware to perform a relatively simple task, nowadays embedded and mobile devices are designed as a platform where multiple applications can be run, new applications can be added, and existing applications can be updated. In this scenario, traditional constraints in embedded systems design (i.e., performance, memory and energy consumption and real-time guarantees) are more difficult to address. New concerns (e.g., security) have become important and increase software complexity as well. In general-purpose systems, Dynamic Binary Translation (DBT) has been used to address these issues with services such as Just-In-Time (JIT) compilation, dynamic optimization, virtualization, power management and code security. In embedded systems, however, DBT is not usually employed due to performance, memory and power overhead. This dissertation presents StrataX, a low-overhead DBT framework for embedded systems. StrataX addresses the challenges faced by DBT in embedded systems using novel techniques. To reduce DBT overhead, StrataX loads code from NAND-Flash storage and translates it into a Scratchpad Memory (SPM), a software-managed on-chip SRAM with limited capacity. SPM has similar access latency as a hardware cache, but consumes less power and chip area. StrataX manages SPM as a software instruction cache, and employs victim compression and pinning to reduce retranslation cost and capture frequently executed code in the SPM. To prevent performance loss due to excessive code expansion, StrataX minimizes the amount of code inserted by DBT to maintain control of program execution. When a hardware instruction cache is available, StrataX dynamically partitions translated code among the SPM and main memory. With these techniques, StrataX has low performance overhead relative to native execution for MiBench programs. Further, it simplifies embedded software and hardware design by operating transparently to applications without any special hardware support. StrataX achieves sufficiently low overhead to make it feasible to use DBT in embedded systems to address important design goals and requirements

Survey on Deduplication Techniques in Flash-Based Storage

Data deduplication importance is growing with the growth of data volumes. The domain of data deduplication is in active development. Recently it was influenced by appearance of Solid State Drive. This new type of disk has significant differences from random access memory and hard disk drives and is widely used now. In this paper we propose a novel taxonomy which reflects the main issues related to deduplication in Solid State Drive. We present a survey on deduplication techniques focusing on flash-based storage. We also describe several Open Source tools implementing data deduplication and briefly describe open research problems related to data deduplication in flash-based storage systems

The Design of A High Capacity and Energy Efficient Phase Change Main Memory

Higher energy-efficiency has become essential in servers for a variety of reasons that range from heavy power and thermal constraints, environmental issues and financial savings. With main memory responsible for at least 30% of the energy consumed by a server, a low power main memory is fundamental to achieving this energy efficiency DRAM has been the technology of choice for main memory for the last three decades primarily because it traditionally combined relatively low power, high performance, low cost and high density. However, with DRAM nearing its density limit, alternative low-power memory technologies, such as Phase-change memory (PCM), have become a feasible replacement. PCM limitations, such as limited endurance and low write performance, preclude simple drop-in replacement and require new architectures and algorithms to be developed. A PCM main memory architecture (PMMA) is introduced in this dissertation, utilizing both DRAM and PCM, to create an energy-efficient main memory that is able to replace a DRAM-only memory. PMMA utilizes a number of techniques and architectural changes to achieve a level of performance that is par with DRAM. PMMA achieves gains in energy-delay of up to 65%, with less than 5% of performance loss and extremely high energy gains. To address the other major shortcoming of PCM, namely limited endurance, a novel, low- overhead wear-leveling algorithm that builds on PMMA is proposed that increases the lifetime of PMMA to match the expected server lifetime so that both server and memory subsystems become obsolete at about the same time. We also study how to better use the excess capacity, traditionally available on PCM devices, to obtain the highest lifetime possible. We show that under specific endurance distributions, the naive choice does not achieve the highest lifetime. We devise rules that empower the designer to select algorithms and parameters to achieve higher lifetime or simplify the design knowing the impact on the lifetime. The techniques presented also apply to other storage class memories (SCM) memories that suffer from limited endurance

IMPROVING THE PERFORMANCE OF HYBRID MAIN MEMORY THROUGH SYSTEM AWARE MANAGEMENT OF HETEROGENEOUS RESOURCES

Modern computer systems feature memory hierarchies which typically include DRAM as the main memory and HDD as the secondary storage. DRAM and HDD have been extensively used for the past several decades because of their high performance and low cost per bit at their level of hierarchy. Unfortunately, DRAM is facing serious scaling and power consumption problems, while HDD has suffered from stagnant performance improvement and poor energy efficiency. After all, computer system architects have an implicit consensus that there is no hope to improve future system’s performance and power consumption unless something fundamentally changes. To address the looming problems with DRAM and HDD, emerging Non-Volatile RAMs (NVRAMs) such as Phase Change Memory (PCM) or Spin-Transfer-Toque Magnetoresistive RAM (STT-MRAM) have been actively explored as new media of future memory hierarchy. However, since these NVRAMs have quite different characteristics from DRAM and HDD, integrating NVRAMs into conventional memory hierarchy requires significant architectural re-considerations and changes, imposing additional and complicated design trade-offs on the memory hierarchy design. This work assumes a future system in which both main memory and secondary storage include NVRAMs and are placed on the same memory bus. In this system organization, this dissertation work has addressed a problem facing the efficient exploitation of NVRAMs and DRAM integrated into a future platform’s memory hierarchy. Especially, this dissertation has investigated the system performance and lifetime improvement endowed by a novel system architecture called Memorage which co-manages all available physical NVRAM resources for main memory and storage at a system-level. Also, the work has studied the impact of a model-guided, hardware-driven page swap in a hybrid main memory on the application performance. Together, the two ideas enable a future system to ameliorate high system performance degradation under heavy memory pressure and to avoid an inefficient use of DRAM capacity due to injudicious page swap decisions. In summary, this research has not only demonstrated how emerging NVRAMs can be effectively employed and integrated in order to enhance the performance and endurance of a future system, but also helped system architects understand important design trade-offs for emerging NVRAMs based memory and storage systems

Doctor of Philosophy

dissertationWith the explosion of chip transistor counts, the semiconductor industry has struggled with ways to continue scaling computing performance in line with historical trends. In recent years, the de facto solution to utilize excess transistors has been to increase the size of the on-chip data cache, allowing fast access to an increased portion of main memory. These large caches allowed the continued scaling of single thread performance, which had not yet reached the limit of instruction level parallelism (ILP). As we approach the potential limits of parallelism within a single threaded application, new approaches such as chip multiprocessors (CMP) have become popular for scaling performance utilizing thread level parallelism (TLP). This dissertation identifies the operating system as a ubiquitous area where single threaded performance and multithreaded performance have often been ignored by computer architects. We propose that novel hardware and OS co-design has the potential to significantly improve current chip multiprocessor designs, enabling increased performance and improved power efficiency. We show that the operating system contributes a nontrivial overhead to even the most computationally intense workloads and that this OS contribution grows to a significant fraction of total instructions when executing several common applications found in the datacenter. We demonstrate that architectural improvements have had little to no effect on the performance of the OS over the last 15 years, leaving ample room for improvements. We specifically consider three potential solutions to improve OS execution on modern processors. First, we consider the potential of a separate operating system processor (OSP) operating concurrently with general purpose processors (GPP) in a chip multiprocessor organization, with several specialized structures acting as efficient conduits between these processors. Second, we consider the potential of segregating existing caching structures to decrease cache interference between the OS and application. Third, we propose that there are components within the OS itself that should be refactored to be both multithreaded and cache topology aware, which in turn, improves the performance and scalability of many-threaded applications