Correlated shadowing and fading characterization of MIMO off-body channels by means of multiple autonomous on-body nodes

In off-body communication systems low-cost and compact transceivers are important for realistic applications. An autonomous off-body wireless node was designed and integrated onto a textile antenna. Channel measurements were performed for an indoor non line-off-sight 4x2 MIMO (Multiple-Input Multiple-Output) link using four off-body transmitting nodes and two similar fixed receiving nodes. The channel behavior is characterized as Rayleigh fading with lognormal shadowing and is fitted to a model determining fading and shadowing correlation matrices. The physics of the propagation is captured accurately by the model which is further used to simulate a link using diversity by means of Selection Combining, as implemented on the wireless nodes. The performance of measured and simulated links is compared in terms of outage probability level. The measurements and analysis confirm that the correlated shadowing and fading model is relevant for realistic off-body networks employing diversity by means of Selection Combining

Realistic performance measurement for body-centric spatial modulation links

Spatial Modulation is a new transmission mode which increases spectral efficiency by employing information-driven transmit antenna selection. This performance is realized at a reduced hardware complexity and cost because only a single radio-frequency transmit chain is necessary. A measurement campaign is performed to assess the characteristics of spatial modulation over a body-centric communication channel, transmitting from a walking person with textile antennas integrated into the front and back sections of a garment, towards a base-station in realistic conditions. In the transmitted frames, additional spatial multiplexing as well as space-time coded data blocks are included. The off-body communication link is analyzed for line-of-sight as well as non line-of-sight radio wave propagation, comparing the characteristics of the different transmission modes under equal propagation conditions and for an equal channel capacity of 2 bit/s/Hz

Energy-efficient off-body communication nodes with receive diversity

Off-body wireless communication applications range from fall-detection systems for the elderly to monitoring networks for rescue workers. Further development of practical body-worn systems requires compact, low-cost and low-power battery-powered equipment. A versatile wearable network node offering all these features, including a powerful microcontroller for data processing and additional memory for local data logging was designed and implemented. The node allows receive diversity, mitigating the negative impact of fading, which is typically present in indoor propagation environments. Channel measurements are performed for an indoor Non Line-of-Sight communication between two nodes. Mobile-to-base-station as well as mobile-to-mobile links are considered. A statistical analysis of the performance determines outage probability with and without receiver diversity for both link types, showing a significant diversity gain in all cases. Correlation properties, level crossing rate and average fade duration are also determined

MIMO and beamforming techniques for reliable off-body communication using textile antennas

Wireless communication systems with textile antennas can be entirely integrated into clothing or garment and do not hinder the user’s movements. Great interest in such an off-body communication system exists in the field of rescue operations, such as firefighting, where the automated communication of vital data between rescue workers or to a base station improves the coordination of the operation and the safety of the rescue workers. To set up a reliable wireless off-body communication link, a number of specific challenges need to be overcome. Persons equipped with wearable antennas constantly change position, orientation, walking pace and body posture. This results in unpredictably variable fading and shadowing on the received signals, producing bit errors, even in case of a high average received signal-to-noise ratio. Fading and shadowing hence dramatically limit the reliability of a communication system with single antennas at both link ends. Using multiple textile antennas, the performance degradation is drastically limited, by means of MIMO and/or beamforming techniques, which mitigate the signal variation and/or produce a higher average signal-to-noise ratio at the receiver, respectively. The research documented in this PhD thesis includes multiple measurement campaigns and their analysis for a diverse number of off-body communication configurations, using MIMO and beamforming techniques with textile antennas. Off-body MIMO techniques are shown to result in a significant improvement of the reliability of the communication, an improvement which further increases when more antennas are used. Channel variation typically of the off-body scenario is tracked with a computationally low-cost system, using adaptive digital low-pass filtering on decision-oriented channel estimation information. Off-body static beamforming techniques are shown to often outperform transmit diversity systems, producing a lower bit error rate at the receiver, provided that receiver diversity is employed to compensate for the channel variation. Finally, a new theoretical model specifically for the off-body MIMO communication channel is presented, allowing an accurate reproduction of bit error rate and channel capacity characteristics as well as the generation of measurement-like random off-body MIMO channel realizations for simulation purposes

Empirical multi-band characterization of propagation with modelling aspects for communictions

Diese Arbeit präsentiert eine empirische Untersuchung der Wellenausbreitung für drahtlose Kommunikation im Millimeterwellen- und sub-THz-Band, wobei als Referenz das bereits bekannte und untersuchte sub-6-GHz-Band verwendet wird. Die großen verfügbaren Bandbreiten in diesen hohen Frequenzbändern erlauben die Verwendung hoher instantaner Bandbreiten zur Erfüllung der wesentlichen Anforderungen zukünftiger Mobilfunktechnologien (5G, “5G and beyond” und 6G). Aufgrund zunehmender Pfad- und Eindringverluste bei zunehmender Trägerfrequenz ist die resultierende Abdeckung dabei jedoch stark reduziert. Die entstehenden Pfadverluste können durch die Verwendung hochdirektiver Funkschnittstellen kompensiert werden, wodurch die resultierende Auflösung im Winkelbereich erhöht wird und die Notwendigkeit einer räumlichen Kenntnis der Systeme mit sich bringt: Woher kommt das Signal? Darüber hinaus erhöhen größere Anwendungsbandbreiten die Auflösung im Zeitbereich, reduzieren das small-scale Fading und ermöglichen die Untersuchung innerhalb von Clustern von Mehrwegekomponenten. Daraus ergibt sich für Kommunikationssysteme ein vorhersagbareres Bild im Winkel-, Zeit- und Polarisationsbereich, welches Eigenschaften sind, die in Kanalmodellen für diese Frequenzen widergespiegelt werden müssen. Aus diesem Grund wurde in der vorliegenden Arbeit eine umfassende Charakterisierung der Wellenausbreitung durch simultane Multibandmessungen in den sub-6 GHz-, Millimeterwellen- und sub-THz-Bändern vorgestellt. Zu Beginn wurde die Eignung des simultanen Multiband-Messverfahrens zur Charakterisierung der Ausbreitung von Grenzwert-Leistungsprofilen und large-scale Parametern bewertet. Anschließend wurden wichtige Wellenausbreitungsaspekte für die Ein- und Multibandkanalmodellierung innerhalb mehrerer Säulen der 5G-Technologie identifiziert und Erweiterungen zu verbreiteten räumlichen Kanalmodellen eingeführt und bewertet, welche die oben genannten Systemaspekte abdecken.This thesis presents an empirical characterization of propagation for wireless communications at mm-waves and sub-THz, taking as a reference the already well known and studied sub-6 GHz band. The large blocks of free spectrum available at these high frequency bands makes them particularly suitable to provide the necessary instantaneous bandwidths to meet the requirements of future wireless technologies (5G, 5G and beyond, and 6G). However, isotropic path-loss and penetration-loss are larger with increasing carrier frequency, hence, coverage is severely reduced. Path-loss can be compensated with the utilization of highly directive radio-interfaces, which increases the resolution in the angular domain. Nonetheless, this emphasizes the need of spatial awareness of systems, making more relevant the question “where does the signal come from?” In addition, larger application bandwidths increase the resolution in the time domain, reducing small-scale fading and allowing to observe inside of clusters of multi-path components (MPCs). Consequently, communication systems have a more deterministic picture of the environment in the angular, time, and polarization domain, characteristics that need to be reflected in channel models for these frequencies. Therefore, in the present work we introduce an extensive characterization of propagation by intensive simultaneous multi-band measurements in the sub-6 GHz, mm-waves, and sub-THz bands. Firstly, the suitability of the simultaneous multi-band measurement procedure to characterize propagation from marginal power profiles and large-scale parameters (LSPs) has been evaluated. Then, key propagation aspects for single and multi-band channel modelling in several verticals of 5G have been identified, and extensions to popular spatial channel models (SCMs) covering the aforementioned system aspects have been introduced and evaluated