Integrated Transversal Equalizers in High-Speed Fiber-Optic Systems

Intersymbol interference (ISI) caused by intermodal dispersion in multimode fibers is the major limiting factor in the achievable data rate or transmission distance in high-speed multimode fiber-optic links for local area networks applications. Compared with optical-domain and other electrical-domain dispersion compensation methods, equalization with transversal filters based on distributed circuit techniques presents a cost-effective and low-power solution. The design of integrated distributed transversal equalizers is described in detail with focus on delay lines and gain stages. This seven-tap distributed transversal equalizer prototype has been implemented in a commercial 0.18-µm SiGe BiCMOS process for 10-Gb/s multimode fiber-optic links. A seven-tap distributed transversal equalizer reduces the ISI of a 10-Gb/s signal after 800 m of 50-µm multimode fiber from 5 to 1.38 dB, and improves the bit-error rate from about 10^-5 to less than 10^-12

Recent Results From the EU POF-PLUS Project: Multi-Gigabit Transmission Over 1 mm Core Diameter Plastic Optical Fibers

Recent activity to achieve multi-gigabit transmission over 1 mm core diameter graded-index and step-index plastic optical fibers for distances up to 50 meters is reported in this paper. By employing a simple intensity-modulated direct-detection system with pulse amplitude or digital multi-tone modulation techniques, low-cost transceivers and easy to install large-core POFs, it is demonstrated that multi-gigabit transmission up to 10 Gbit/s over 1-mm core diameter POF infrastructure is feasible. The results presented in this paper were obtained in the EU FP7 POF-PLUS project, which focused on applications in different scenarios, such as in next-generation in-building residential networks and in datacom applications

Digital Signal Processing on FPGA for Short-Range Optical Communications Systems over Plastic Optical Fiber

Nowadays bandwidth requirements are increasing vertiginously. As new ways and concepts of how to share information emerge, new ways of how to access the web enter the market. Computers and mobile devices are only the beginning, the spectrum of web products and services such as IPTV, VoIP, on-line gaming, etc has been augmented by the possibility to share, store data, interact and work on the Cloud. The rush for bandwidth has led researchers from all over the world to enquire themselves on how to achieve higher data rates, and it is thanks to their efforts, that both long-haul and short-range communications systems have experienced a huge development during the last few years. However, as the demand for higher information throughput increases traditional short-range solutions reach their lim- its. As a result, optical solutions are now migrating from long-haul to short-range communication systems. As part of this trend, plastic optical fiber (POF) systems have arisen as promising candidates for applications where traditional glass optical fibers (GOF) are unsuitable. POF systems feature a series of characteristics that make them very suitable for the market requirements. More in detail, these systems are low cost, robust, easy to handle and to install, flexible and yet tolerant to bendings. Nonetheless, these features come at the expense of a considerable higher bandwidth limitation when compared to GOF systems. This thesis is aimed to the investigate the use of digital signal processing (DSP) algorithms to overcome the bandwidth limitation in short-range optical communications system based on POF. In particular, this dissertation presents the design and development of DSP algorithms on field programmable gate arrays (FPGAs) with the ultimate purpose of implementing a fully engineered 1Gbit/s Ethernet Media Converter capable of establishing data links over 50+ meters of PMMA-SI POF using an RC-LED as transmitte

Key Signal Processing Technologies for High-speed Passive Optical Networks

With emerging technologies such as high-definition video, virtual reality, and cloud computing, bandwidth demand in the access networks is ever-increasing. Passive optical network (PON) has become a promising architecture thanks to its low cost and easy management. IEEE and ITU-T standard organizations have been standardizing the next-generation PON, targeting on increasing the single-channel capacity from 10 Gb/s to 25, 50, and 100 Gb/s as the solution to address the dramatic increase of bandwidth demand. However, since the access network is extremely cost-sensitive, many research problems imposed in the physical layer of PON need to be addressed in a cost-efficient way, which is the primary focus of this thesis. Utilizing the low-cost 10G optics to build up high-speed PON systems is a promising approach, where signal processing techniques are key of importance. Two categories of signal processing techniques have been extensively investigated, namely optical signal processing (OSP) and digital signal processing (DSP). Dispersion-supported equalization (DSE) as a novel OSP scheme is proposed to achieve bit-rate enhancement from 10 Gb/s to 25 Gb/s based on 10G class of optics. Thanks to the bandwidth improved by DSE, the non-return-zero on-off keying which is the simplest modulation format is able to be adopted in the PON system without complex modulation or DSP. Meanwhile, OSP is also proposed to work together with DSP enabling 50G PON while simplifying the DSP complexity. Using both DSE and simple feed-forward equalizer is able to support 50 Gb/s PAM-4 transmission with 10G optics. For C-band 50 Gb/s transmission, injection locking techniques as another OSP approach is proposed to compress the directly modulated laser chirp and increase system bandwidth in the optical domain where a doubled capacity from 25 Gb/s to 50 Gb/s over 20 km fiber can be built on top of 10G optics. For DSP, we investigated the advantages of neural network (NN) on the mitigation of the time-varying nonlinear semiconductor optical amplifier pattern effect. In order to reduce the expense caused by the high computation complexity of NN, a pre- equalizer is introduced at the central office that allows cost sharing for all connected access users. In order to push the PON system line rate to 100 Gb/s, a joint nonlinear Tomlinson- Harashima precoding-Volterra algorithm is proposed to compensate for both linear and nonlinear distortions where 100 Gb/s PAM-4 transmission over 20 km fiber with 15 GHz system bandwidth can be achieved

High Speed Optical Links Using CAP Modulation and Novel Equalisation Techniques

High speed optical links suffer from inter-symbol-interference (ISI) due to their limited bandwidth. Equalisation is typically used to mitigate ISI and therefore improve the link capacity. This dissertation explores novel equalisation techniques for carrierless amplitude and phase (CAP) modulation based optical communication systems including OM4 based and plastic optical fibre (POF) based links. An 850 nm VCSEL based OM4 link using CAP-16 scheme is studied. For the first time, the CAP equaliser, is proposed to mitigate both crosstalk channel interference (CCI) and ISI in the link at the receiver side. Performance comparisons are studied between the CAP-16 scheme using CAP equaliser and a conventional equaliser, pulse amplitude modulation (PAM-4) scheme, and discrete multitone (DMT) scheme. CAP based data transmission of 112 Gb/s is achieved over 150 m OM4 fibre with this novel equaliser, while the conventional equaliser can only support over 1 m OM4 fibre and fails to recover the signals at the same data rate. In addition, this novel equaliser provides a 1.2 dB and 1.7 dB improvement in receiver sensitivity over PAM-4 and DMT schemes, respectively, at 112 Gb/s over 100 m OM4 fibre. A novel pre-CAP-equaliser solving CCI at the transmitter side is also proposed. Data transmission of 56 Gb/s over 100 m OM4 fibre is reported experimentally with an improvement of 0.7 dB in receiver sensitivity compared to using the CAP equaliser at the receiver side. A simulation study shows a 2 dB improvement in receiver sensitivity at 112 Gb/s over 100 m OM4 fibre. Furthermore, an artificial neural network (ANN) equaliser in conjunction with the CAP equaliser structure is explored in a VCSEL based OM4 fibre link in order to further mitigate the nonlinear impairments. For 112 Gb/s data transmission over 100 m OM4 fibre, a 2.4 dB improvement of receiver sensitivity is achieved compared to the CAP equaliser. In addition to the electrical equalisers, a monolithically integrated silicon optical equaliser consisting of three taps is used for 50 Gb/s data transmission. After 10 km standard single mode fibre (SSMF), error free eye diagrams at the receiver are demonstrated. A μLED based POF link based on an APD receiver is also investigated with the CAP equaliser at the receiver side. Data transmission rates of 4 Gb/s over 25 m and 5 Gb/s over 10 m POF links are demonstrated with this equaliser while the conventional equaliser can only support 4 Gb/s over 10 m and fails to recover the signals for 5 Gb/s data transmission

Advances in local area optical data communication systems

This paper reviews optical fibre technology for local area optical communications systems. Technologies used in local systems include single and multimode fibre, single and multimode lasers, optical modulators, photodetectors, wavelength division multiplexing, multilevel modulation formats, electronic packet switching, electronic equalization and error correction. These methods have enabled the local area optical link data rate to increase from 0.1 Gb/s in 1990 to nearly a Tb/s in 2019. The challenges to increasing link data rates further, whilst reducing the transmitted power per bit, at reduced cost are discussed. Potential technical solutions and newly proposed methods which might address these challenges are highlighted

Optoelectronic Key Elements for Polymeric Fiber Transmission Systems

In short-range communication 1 mm PMMA SI-POF established itself as a reasonable alternative to the traditional data communication media such as glass fibers, copper cables, and wireless systems. Due to multiple advantages such as a large core diameter, tolerance to fiber facet damages, and low installation costs, the SI-POF is already applied in industrial automation, automotive industry, and in-house/office networks. To experimentally demonstrate the feasibility and potential of a high-speed POF WDM concept, a four-channel data transmission setup was realized. A four-legged multiplexing POF bundle was developed to combine the signals from four visible laser diodes onto SI-POF link. For the separation of wavelength channels, the interference filter-based demultiplexer with two-stage configuration was used. It was shown that POF WDM with lower channel rates and simple transmission technique (NRZ + FFE) could provide aggregate bit rates comparable to those achieved with the single-wavelength systems that used advanced modulation formats (DMT or PAM + DFE) and required significant signal processing. In addition, the 50 m SI-POF link at an aggregate bit rate of 7.8 Gb/s was demonstrated over 50 m SI-POF, respectively, at the BER = 10–3