104 research outputs found

    Performance Analysis and Improvement of WPAN MAC for Home Networks

    Get PDF
    The wireless personal area network (WPAN) is an emerging wireless technology for future short range indoor and outdoor communication applications. The IEEE 802.15.3 medium access control (MAC) is proposed to coordinate the access to the wireless medium among the competing devices, especially for short range and high data rate applications in home networks. In this paper we use analytical modeling to study the performance analysis of WPAN (IEEE 802.15.3) MAC in terms of throughput, efficient bandwidth utilization, and delay with various ACK policies under error channel condition. This allows us to introduce a K-Dly-ACK-AGG policy, payload size adjustment mechanism, and Improved Backoff algorithm to improve the performance of the WPAN MAC. Performance evaluation results demonstrate the impact of our improvements on network capacity. Moreover, these results can be very useful to WPAN application designers and protocol architects to easily and correctly implement WPAN for home networking

    Energy-efficiency media access control in wireless ad hoc networks

    Get PDF

    About the Use of Adaptive Antennas in 60 GHz UWB-OFDM Personal Area Network Transceivers

    Get PDF
    The recent opening of unlicensed spectrum around 60 GHz has raised the interest in designing gigabit Wireless Personal Area Networks (WPANs). Since at 60 GHz the signal attenuation is strong, this band is basically suitable for short range wireless communications. It is understood that directional antennas can be employed to compensate for the path loss and combat the waste of power due to the scatter phenomena characteristic of these high frequencies. This thesis studies the use of adaptive array systems in 60 GHz Ultra Wide Band-Orthogonal Frequency Division Multiplexing (UWB-OFDM) personal area network transceivers. The study has been conducted by simulations and theoretical analysis. Two sensor arrangements have been considered, the Uniform Linear Arrays (ULA) and the Uniform Circular Arrays (UCA), in the simple case of the Line of Sight (LOS) transmission scenario. On the one hand we have designed a IEEE 802.15.3c Medium Access Control (MAC) phased-array controller throughput using Direction of Arrival (DOA) estimation to perform beamsteering. We have simulated the MAC controller with the network simulator ns-2. The impact of the array controller performance onto the achievable throughput of the wireless links has been studied to draw the requirements about the standard deviation of the DOA estimator. On the other hand, we have found the Cramér-Rao Bound (CRB) for DOA estimation of impinging 60 GHz OFDM sources. The requirements of the standard deviation of the DOA estimator are analysed against the CRB for DOA to validate the design of the directional 60 GHz UWB-OFDM transceivers. The comparison reveals that directional 60 GHz UWB-OFDM transceivers can achieve high wireless throughput with a number of pilot subcarriers and for a Signal to Noise Ratio (SNR) operating range typical of next generation WPAN

    Design and Analysis of Medium Access Control Protocols for Broadband Wireless Networks

    Get PDF
    The next-generation wireless networks are expected to integrate diverse network architectures and various wireless access technologies to provide a robust solution for ubiquitous broadband wireless access, such as wireless local area networks (WLANs), Ultra-Wideband (UWB), and millimeter-wave (mmWave) based wireless personal area networks (WPANs), etc. To enhance the spectral efficiency and link reliability, smart antenna systems have been proposed as a promising candidate for future broadband access networks. To effectively exploit the increased capabilities of the emerging wireless networks, the different network characteristics and the underlying physical layer features need to be considered in the medium access control (MAC) design, which plays a critical role in providing efficient and fair resource sharing among multiple users. In this thesis, we comprehensively investigate the MAC design in both single- and multi-hop broadband wireless networks, with and without infrastructure support. We first develop mathematical models to identify the performance bottlenecks and constraints in the design and operation of existing MAC. We then use a cross-layer approach to mitigate the identified bottleneck problems. Finally, by evaluating the performance of the proposed protocols with analytical models and extensive simulations, we determine the optimal protocol parameters to maximize the network performance. In specific, a generic analytical framework is developed for capacity study of an IEEE 802.11 WLAN in support of non-persistent asymmetric traffic flows. The analysis can be applied for effective admission control to guarantee the quality of service (QoS) performance of multimedia applications. As the access point (AP) becomes the bottleneck in an infrastructure based WLAN, we explore the multiple-input multiple-output (MIMO) capability in the future IEEE 802.11n WLANs and propose a MIMO-aware multi-user (MU) MAC. By exploiting the multi-user degree of freedom in a MIMO system to allow the AP to communicate with multiple users in the downlink simultaneously, the proposed MU MAC can minimize the AP-bottleneck effect and significantly improve the network capacity. Other enhanced MAC mechanisms, e.g., frame aggregation and bidirectional transmissions, are also studied. Furthermore, different from a narrowband system where simultaneous transmissions by nearby neighbors collide with each other, wideband system can support multiple concurrent transmissions if the multi-user interference can be properly managed. Taking advantage of the salient features of UWB and mmWave communications, we propose an exclusive region (ER) based MAC protocol to exploit the spatial multiplexing gain of centralized UWB and mmWave based wireless networks. Moreover, instead of studying the asymptotic capacity bounds of arbitrary networks which may be too loose to be useful in realistic networks, we derive the expected capacity or transport capacity of UWB and mmWave based networks with random topology. The analysis reveals the main factors affecting the network (transport) capacity, and how to determine the best protocol parameters to maximize the network capacity. In addition, due to limited transmission range, multi-hop relay is necessary to extend the communication coverage of UWB networks. A simple, scalable, and distributed UWB MAC protocol is crucial for efficiently utilizing the large bandwidth of UWB channels and enabling numerous new applications cost-effectively. To address this issue, we further design a distributed asynchronous ER based MAC for multi-hop UWB networks and derive the optimal ER size towards the maximum network throughput. The proposed MAC can significantly improve both network throughput and fairness performance, while the throughput and fairness are usually treated as a tradeoff in other MAC protocols

    Performance enhancements for single hop and multi-hop meshed high data rate wireless personal area networks

    Get PDF
    The High Data Rate (HDR) Wireless Personal Area Networks (WPANs) typically have a limited operating range and are intended to support demanding multi-media applications at high data rates. In order to extend the communication range, HDR WPANs can operate in a wireless mesh configuration (i.e. enable multiple WPAN clusters) to communicate in a multi-hop fashion. HDR WPANs face several research challenges and some of the open key issues are limited capacity, optimum resource allocation to requesting devices and maintaining Quality of Service (QoS) for real time multimedia flows. Although, there have been some scheduling algorithms proposed for HDR WPANs, the main objective is to maintain the QoS in most cases whereas efficient and fair utilization of network capacity is still largely open for research. This thesis mainly intends to resolve the issues related to capacity of HDR WPANs such as admission control, fair allocation of Channel Time Allocations (CTAs), improvement in capacity through transmission power control, and efficient utilization of time by each flow. A technique which re-orders the time slots to reduce queuing delay for meshed WPANs is also proposed and evaluated. The first contribution aims to improve peer-to-peer connectivity in case of two or more independent piconet devices by proposing an inter-PAN communication framework that is augmented by an admission control strategy to handle the cases when the superframe capacity is congested. The queued devices are prioritized by proposing a parameter called the Rejection Ratio. The second contribution consists of a resource allocation framework for meshed WPANs. The main objectives are to reduce the control traffic due to high volume of channel time reservation requests and introduce an element of fairness in the channel time allocated to requesting devices. The objectives are achieved by using traffic prediction techniques and an estimated backoff procedure to reduce control traffic, and define different policies based on offered traffic for fair allocation of channel time. The centralized scheme uses traffic prediction techniques to use the proposed concept of bulk reservations. Based on the bulk reservations and resource allocation policies, the overall overhead is reduced while an element of fairness is shown to be maintained for certain scenarios. In the third contribution, the concepts of Time Efficiency and CTA switching are introduced to improve communication efficiency and utilization of superframe capacity in meshed WPANs. Two metrics known as Switched Time Slot (STS) and Switched Time Slot with Re-ordering (STS-R) are proposed which aim to achieve the purpose. The final contribution proposes and evaluates a technique called CTA overlappnig to improve capacity in single hop and meshed WPANs using tramission power control. Extensive simulation studies are performed to analyze and to evaluate the proposed techniques. Simulation results demonstrate significant improvements in meshed WPANs performance in terms of capacity utilization, improvement in fairness index for CTA allocation by upto 62% in some cases, reduction in control traffic overhead by upto 70% and reduction in delay for real time flows by more than 10% in some cases.EThOS - Electronic Theses Online ServiceGBUnited Kingdo

    Distributed multi-hop reservation scheme for wireless personal area ultra-wideband networks

    Get PDF
    Ultra-wideband (UWB) technology is a promising technology for multimedia applications in wireless personal area networks (WPANs) that supports very high data rates with lower power transmission for short range communication. The limitation of coverage radius of UWB network necessitates for multihop transmissions. Unfortunately, as the number of hops increases, the quality of service (QoS) degrades rapidly in multihop network. The main goal of this research is to develop and enhance multihop transmission that ensures QoS of real time traffic through the proposed distributed multihop reservation (DMR) scheme. The DMR scheme consists of two modules; distributed multihop reservation protocol (DMRP) and path selection. DMRP incorporates resource reservation, routing and connection setup that are extended on the existing WiMedia Media Access Control protocol (MAC). On the other hand, the path selection determines the optimal path that makes up the multihop route. The path selection selects nodes based on the highest Signal to Interference and Noise Ratio (SINR). The performance of DMR scheme has been verified based on the performance of the video traffic transmission. The main metrics of QoS are measured in terms of Peak Signal- to- Noise ratio (PSNR), End-to-End (E2E) delay, and throughput. The results show that DMRP compared to Multiple Resources Reservation Scheme (MRRS) in six (6) hops transmission has enhanced the average PSNR by 16.5%, reduced the average E2E delay by 14.9% and has increased the throughput by 11.1%. The DMR scheme which is the inclusion of path selection in DMRP has been compared to Link Quality Multihop Relay (LQMR). DMR scheme has improved the video quality transmission by 17.5%, reduced the average E2E delay by 18.6% and enhanced the average throughput by 20.3%. The QoS of six (6) hops transmission employing DMR scheme is almost sustained compared to two hops transmission with the QoS experiencing only slight degradation of about 2.0%. This is a considerable achievement as it is well known that as the number of hops increases the QoS in multihop transmission degrades very rapidly. Thus DMR scheme has shown to significantly improve the performance of real time traffic on UWB multihop network. In general, DMR can be applied to any WPAN network that exploit multihop transmission

    CogCell: Cognitive Interplay between 60GHz Picocells and 2.4/5GHz Hotspots in the 5G Era

    Full text link
    Rapid proliferation of wireless communication devices and the emergence of a variety of new applications have triggered investigations into next-generation mobile broadband systems, i.e., 5G. Legacy 2G--4G systems covering large areas were envisioned to serve both indoor and outdoor environments. However, in the 5G-era, 80\% of overall traffic is expected to be generated in indoors. Hence, the current approach of macro-cell mobile network, where there is no differentiation between indoors and outdoors, needs to be reconsidered. We envision 60\,GHz mmWave picocell architecture to support high-speed indoor and hotspot communications. We envisage the 5G indoor network as a combination of-, and interplay between, 2.4/5\,GHz having robust coverage and 60\,GHz links offering high datarate. This requires an intelligent coordination and cooperation. We propose 60\,GHz picocellular network architecture, called CogCell, leveraging the ubiquitous WiFi. We propose to use 60\,GHz for the data plane and 2.4/5GHz for the control plane. The hybrid network architecture considers an opportunistic fall-back to 2.4/5\,GHz in case of poor connectivity in the 60\,GHz domain. Further, to avoid the frequent re-beamforming in 60\,GHz directional links due to mobility, we propose a cognitive module -- a sensor-assisted intelligent beam switching procedure -- which reduces the communication overhead. We believe that the CogCell concept will help future indoor communications and possibly outdoor hotspots, where mobile stations and access points collaborate with each other to improve the user experience.Comment: 14 PAGES in IEEE Communications Magazine, Special issue on Emerging Applications, Services and Engineering for Cognitive Cellular Systems (EASE4CCS), July 201
    corecore