24 research outputs found
Electrical Size Reduction of Microstrip Antennas by Using Defected Ground Structures Composed of Complementary Split Ring Resonator
In this study the effects of using defected ground structures (DGS) composed of a
complementary split ring resonator (CSRR) and CSRR with dumbbell (CSRR-D) for rectangular microstrip
antennas are investigated. On this aim, two different antennas, which are Antenna B having CSRR etched
DGS and Antenna C having CSRR-D etched DGS are designed and fabricated in comparison with the
ordinary rectangular patch antenna, which is Antenna A. In both Antenna B and C, CSRR structures are
etched in the same position of the ground planes. On the other hand, another ordinary microstrip antenna,
called Antenna D, is designed at resonance frequency of Antenna C. For the characterization, resonance
frequencies, voltage standing wave ratios, percentage bandwidths, gains, ka values and gain radiation
patterns are investigated both in simulations and experiments. The numerical analyses show that 29.39 %
and 44.49 % electrical size reduction (ESR) ratios are obtained for Antenna B and Antenna C, respectively
in comparison to Antenna A. The experimental results verify the ESR ratios with 29.15 % and 44.94 %.
Supporting, Antenna C promises 68.12 % physical size reduction (PSR) as it is compared with Antenna D.
These results reveal that Antenna C is a good alternative for DGS based microstrip electrically small
antennas
Ring Shape Microstrip Antenna Backed by Modified Ground Plane for Multiband Response in GSM and Radar Applications
Abstract Ring shape microstrip antenna designs supported via an altered ground plane profile are proposed for multi-band response with wider bandwidth in each band. The impedance bandwidth of a single ring patch supported via a slot cut ground plane on a substrate having a thickness of ~ 0.1λg, is 45.8% and the broadside gain is 5.6 dBi. By employing additional stack patches, dual and triple-band configurations are obtained. In the respective operative frequency bands, maximum 15% of bandwidth is achieved in the suggested antenna, with a maximum broadside gain of more than 5.5 dBi. Through the acquired antenna features, the proposed configuration fulfills the criteria of E-GSM900/Secondary Surveillance Radar/Aeronautical Radio Navigation Applications
Review on the Design of the Isolation Techniques for UWB-MIMO Antennas
Ultra wide band - Multiple Input Multiple Output antenna technology provides higher data rates and the combination of the ultra wide band (UWB) and the multiple input multiple output (MIMO) technologies provides a solution for the demand of still higher data rates i.e. in excess of 3 Gb/sec in the future. As the antenna technologies are improving, the size of the MIMO antenna is growing smaller and smaller. Placing the antenna elements in such close proximity increases the coupling between them. Various isolation techniques have to be introduced between the antenna elements to decrease the coupling and to improve the isolation. A study of the various isolation enhancement techniques have been made in this review. It analyses the various isolation enhancement methods such as using orthogonal polarization, parasitic elements, varied decoupling structures, defected ground structures (DGS), neutralization line (NL) and finally by using metamaterials. Metamaterials is a technology to perk up the isolation between the antenna elements. Split ring resonator (SRR) behaves as a metamaterial and it is used as an isolation mechanism in this study. The antennas are simulated and the results are compared. The method using parasitic elements gives the highest isolation of 35 dB and it is 5 dB better than the methods using orthogonal polarization and using the decoupling structure. The performance of all the antennas satisfies the conditions for minimum isolation. The envelope correlation coefficient is nearly zero in all the antennas and it implies good diversity performance. The diversity gain is also calculated for the various antennas and it satisfies good diversity performance. The bandwidth of the antennas is in the UWB frequency range and they have a fractional bandwidth above the required value of 1.09. The capacity loss for all the antennas is very low and the antennas using defected ground structure and the decoupling structure gives very low capacity loss
Techniques for Compact Planar MIMO Antennas
MIMO Technology has promoted the developments of various antennas, then the planar antenna will be one of the main directions to satisfy the future compact requirement of the 5G+/6G communications. This chapter introduces different types of the planar antenna and summarizes the implicit compact techniques, where the related techniques like the diversity and the reconfigurable are not included owing to they are the inherent properties of the MIMO antennas. These antennas contain the patch antenna, slot antenna, dipole/monopole antenna, loop antenna, cavity antenna, Yagi-Uda antenna, fractal antenna, UWB antenna, PIFA etc., and their deformations to the specific purposes. On the contrary, the implicit compact techniques are not so explicit as the antenna configurations, but they are classified to be the close-spacing structure without decoupling, owing to the decoupling is not the necessary requirement of MIMO application, decoupling technique of spacing reduction, meandered line technique, multi-element method, co-radiator/co-location design, fractal antenna, and radiator-cutting antenna. Besides, the corresponding techniques for the compact design are also concluded, including the mode-cutting method, fractal technique, characteristic mode analysis, and the optimization algorithms
A Study of Wideband and Compact Slot Antennas Utilizing Special Dispersive Materials
This paper presents a novel technique for enhancing the slot antenna bandwidth using special dispersive materials for the first time. The dispersive material whose relative permittivity is inversely proportional to the frequency by the power of n is selected and exploited for antenna bandwidth enhancement and size reduction. The concept and theory behind this work are explored. A slot antenna loaded with the new material is proposed and it is shown that the bandwidth of slot antennas using the material with power n = 2 can be significantly improved with more than 4 times larger than the traditional case (n = 0). The simulated and measured results show excellent properties for wideband improvement and miniaturization which further demonstrates that dispersive materials can open a new path for developing wideband devices and antennas for future wireless communication applications
Recommended from our members
Inkjet Printed Flexible Patch Antennas for Full Duplex and Circular Polarization Applications
Flexible devices are getting more popular nowadays because of it’s lightweight, small size, portability, less expensive, environment friendly, and disposability. Flexible antenna, part of flexible devices, has become an important component of research for electrical engineers. The flexible antenna can be built using different materials like PET, PEN, liquid crystal polymer, PDMS, and textiles like woolen felt, cotton, cordura, and fleece as substrate. This thesis focuses on designing and fabricating antennas on PET paper by using inkjet printing for full duplex and circular polarization applications. Firstly, a flexible full-duplex antenna is proposed with robust performance and high isolation for 5.8 GHz using foam and PET paper. The patch of the antenna is modified by corner cut and inset feeding, while the defected ground structure is used to improve isolation between transmit and receive ports. Silver nanoparticle ink is used for printing the antenna in an inkjet printer. The fabricated version supports simulated results by showing acceptable performance in desired bandwidth. Bending tests and human body loading experiments are carried out on the fabricated antenna to demonstrate the antenna’s effectiveness for wearable applications. To the best of author’s knowledge, this is the first flexible full duplex antenna designed, achieving a high isolation level of -50 dB. Moreover, wide bandwidth, improved gain, and radiation efficiency, low cost, easy fabrication, and robust performance make it a good option for 5.8 GHz wearable applications. Secondly, a simple and compact CPW-fed circularly polarized antenna is presented. The proposed antenna consists of a modified “S” shaped patch, which has slots in three different places along with a slot in the ground plane. These slots contribute to increasing the bandwidth of the axial ratio. The antenna has a 3 dB axial ratio bandwidth of 10.47% (4.07 GHz- 4.52 GHz) and an impedance bandwidth of 17.53% (3.8 GHz - 4.53 GHz) covering the full region of axial ratio band. Moreover, this antenna is designed using PET paper which makes it flexible in nature and the first flexible antenna in the discussed frequency range to the best of author’s knowledge. Finally, an inkjet printed circularly polarized antenna using CPW feeding on PET substrate is proposed. The antenna is designed and optimized using ANSYS HFSS, which operates at 4.01 GHz - 5.05 GHz and 6.23 GHz - 7.58 GHz with a return loss of < -10 dB. On top of that, the antenna shows an axial ratio of less than 3 dB at 4.23 GHz - 4.62 GHz and 7.11 GHz - 7.36 GHz, whereas left hand circular polarization (LHCP) is observed in the first band and right hand circular polarization (RHCP) is observed in the second band. The dimension of the antenna is 31 mm x 37 mm x 0.135 mm. Measurement of the fabricated version shows good agreement with the simulated version. To the best of author’s knowledge, this antenna is the first flexible CPW-fed circularly polarized antenna with dual band
Design and realization for radar cross section reduction of patch antennas using shorted stubs metamaterial absorbers
This thesis is devoted to analyzing of the Radar Cross Section (RCS) of rectangular patch
antenna using Metamaterial Absorber (MMA) and the analysis of its reducing techniques. The
addressed theme has a great complexity and it covers various areas that include designing and
optimization of target geometrical model of rectangular patch antenna structures and making it
compatible with respect to metamaterial geometry. Analyses have been made to optimize and
validate the structure performances that include numerical methods for electromagnetic field
computation, MMA behavior, characterization, extraction of parameters, antenna radiation
performance analyses, simulation, fabrication, testing, and optimization with back validating
the designs.
The MMA structure finds its applications in antenna designing for the reduction of
Monostatic and Bistatic RCS in stealth platform for lower detectable objects. However, there
is still more emphasis needed to devote for in-band frequency response for low RCS of the
antenna. Therefore, making these assumptions, we have been proposing novel designs of
single-band, dual-band, and triple-band MMA structures. These structures provide significant
scattering characteristics and offering flexibility to the designer to control and tune the resonant
frequency, based on the specific applications as compared to that of the other MMAs in the
microwave regime of the Electromagnetic (EM) spectrum.
To explore the research scope, a three dimensional Frequency Selective Surface (FSS)
structure has been analyzed and its simulation responses with respect to parametric analyses
have been made. The research investigation further extended to Electronic Band Gap (EBG)
Structure and Defected Ground Structure (DGS). A hybrid structure of patch antenna is
proposed and designed for an inset feed rectangular microstrip patch antenna operating at 2.45
GHz in the Industrial, Scientific, and Medical (ISM) band. This hybrid structure claims the size
reduction, bandwidth, and gains enhancement.
The main focus of this research work is limited to determine the potential and practical
feasibility of MMA’s to enhance the stealth performance of rectangular patch antennas. For this
purpose, Monostatic and Bistatic RCS simulation and measurements are carried out in an
anechoic chamber and practical methods for Radar Cross Section reduction are discussed and
analyzed
Metasurface based MIMO microstrip antenna with reduced mutual coupling.
Masters Degree. University of KwaZulu- Natal, Durban.In this thesis, a negative permeability (μ) metasurface is used to reduce the mutual coupling of a 2-port Multiple-Input Multiple-Output (MIMO) rectangular inset fed microstrip antenna. That was designed using the transmission model of analysis, simulated and optimized using CST microwave studio. The microstrip antenna that operates at the (5.9-6.1) GHz band is designed for 5G applications, at the extended 6 GHz band (5.925-7.125) GHz. The extended band was chosen because of its new additional spectrum, which results in less noise interference. Three metasurface wall based antenna designs and two metasurface superstrate based antenna designs are conducted. The metasurface wall based antenna designs are formulated by placing a metasurface wall vertically between the two radiating antenna elements. The metasurface superstrate based antenna designs are formulated by suspending a metasurface superstrate above the 2-port microstrip antenna. Both the metasurface wall and superstrate are made up metasurface unit cells, which are formulated by periodic split ring resonators printed on a FR-4 dielectric substrate. The metasurface cells are responsible for introducing a negative permeability medium, which converts the electromagnetic propagating waves into evanescent hence rejecting mutual coupling.
In the first metasurface based antenna design, a single metasurface wall is vertically placed between the two microstrip antenna elements. A slight increase of 0.5 dB in mutual coupling is observed. In the second design, a double metasurface wall is vertically placed between the two antenna elements. A mutual coupling reduction of 11 dB is achieved. In the third design a triple metasurface wall is also placed between the two antenna elements, a mutual coupling reduction of 25 dB and up to 17 % bandwidth enhancement is achieved. In the fourth design a single metasurface superstrate is suspended above the 2-port microstrip antenna. A mutual coupling reduction of 32 dB is achieved. Lastly, in the fifth design a metasurface superstrate is also suspended above the 2-port microstrip antenna. A mutual coupling reduction of 22 dB, a 38% bandwidth enhancement and a 2.09 dB gain enhancement is achieved
A Co-Planar Waveguide Ultra-Wideband Antenna for Ambient Wi-Fi RF Power Transmission and Energy Harvesting Applications
This study proposes an ultra-wideband antenna for ambient radio frequency (RF) energy harvesting applications. The antenna is based on a co-planar waveguide (CPW) transmission line and incorporates a rectangular slot as an antenna harvester. The proposed antenna utilizes an evolutionary design process to achieve impedance matching of the 50 Ω CPW feeding line over the desired frequency bands. A parametric study investigates CPW elements and rectangular slot size. The harvester antenna is then connected to the primary rectifier circuit of the voltage doubler to examine the signal characteristics. The antenna covers the Industry, Science, and Medicine (ISM) Wi-Fi bands of 2.45 GHz and 5 GHz, achieving a realized gain of 3.641 dBi and 4.644 dBi at 2.45 GHz and 5 GHz, respectively. It exhibits a relatively broad frequency ranging from 2.16 GHz to 6.32 GHz, covering the ultra-wideband fractional bandwidth (FBW) of 105%