Bit-Error-Rate-Minimizing Channel Shortening Using Post-FEQ Diversity Combining and a Genetic Algorithm

In advanced wireline or wireless communication systems, i.e., DSL, IEEE 802.11a/g, HIPERLAN/2, etc., a cyclic prefix which is proportional to the channel impulse response is needed to append a multicarrier modulation (MCM) frame for operating the MCM accurately. This prefix is used to combat inter symbol interference (ISI). In some cases, the channel impulse response can be longer than the cyclic prefix (CP). One of the most useful techniques to mitigate this problem is reuse of a Channel Shortening Equalizer (CSE) as a linear preprocessor before the MCM receiver in order to shorten the effective channel length. Channel shortening filter design is a widely examined topic in the literature. Most channel shortening equalizer proposals depend on perfect channel state information (CSI). However, this information may not be available in all situations. In cases where channel state information is not needed, blind adaptive equalization techniques are appropriate. In wireline communication systems (such as DMT), the CSE design is based on maximizing the bit rate, but in wireless systems (OFDM), there is a fixed bit loading algorithm, and the performance metric is Bit Error Rate (BER) minimization. In this work, a CSE is developed for multicarrier and single-carrier cyclic prefixed (SCCP) systems which attempts to minimize the BER. To minimize the BER, a Genetic Algorithm (GA), which is an optimization method based on the principles of natural selection and genetics, is used. If the CSI is shorter than the CP, the equalization can be done by a frequency domain equalizer (FEQ), which is a bank of complex scalars. However, in the literature the adaptive FEQ design has not been well examined. The second phase of this thesis focuses on different types of algorithms for adapting the FEQ and modifying the FEQ architecture to obtain a lower BER. Simulation results show that this modified architecture yields a 20 dB improvement in BER

Blind adaptive channel shortening with a generalized lag-hopping algorithm which employs squared auto-correlation minimization [GLHSAM].

A generalized blind lag-hopping adaptive channel shortening (GLHSAM) algorithm based upon squared auto-correlation minimization is proposed. This algorithm provides the ability to select a level of complexity at each iteration between the sum-squared autocorrelation minimization (SAM) algorithm due to Martin and Johnson and the single lag autocorrelation minimization (SLAM) algorithm proposed by Nawaz and Chambers whilst guaranteeing convergence to high signal to interference ratio (SIR). At each iteration a number of unique lags are chosen randomly from the available range so that on the average GLHSAM has the same cost as the SAM algorithm. The performance of the proposed GLHSAM algorithm is confirmed through simulation studies

Efficient channel equalization algorithms for multicarrier communication systems

Blind adaptive algorithm that updates time-domain equalizer (TEQ) coefficients by Adjacent Lag Auto-correlation Minimization (ALAM) is proposed to shorten the channel for multicarrier modulation (MCM) systems. ALAM is an addition to the family of several existing correlation based algorithms that can achieve similar or better performance to existing algorithms with lower complexity. This is achieved by designing a cost function without the sum-square and utilizing symmetrical-TEQ property to reduce the complexity of adaptation of TEQ to half of the existing one. Furthermore, to avoid the limitations of lower unstable bit rate and high complexity, an adaptive TEQ using equal-taps constraints (ETC) is introduced to maximize the bit rate with the lowest complexity. An IP core is developed for the low-complexity ALAM (LALAM) algorithm to be implemented on an FPGA. This implementation is extended to include the implementation of the moving average (MA) estimate for the ALAM algorithm referred as ALAM-MA. Unit-tap constraint (UTC) is used instead of unit-norm constraint (UNC) while updating the adaptive algorithm to avoid all zero solution for the TEQ taps. The IP core is implemented on Xilinx Vertix II Pro XC2VP7-FF672-5 for ADSL receivers and the gate level simulation guaranteed successful operation at a maximum frequency of 27 MHz and 38 MHz for ALAM-MA and LALAM algorithm, respectively. FEQ equalizer is used, after channel shortening using TEQ, to recover distorted QAM signals due to channel effects. A new analytical learning based framework is proposed to jointly solve equalization and symbol detection problems in orthogonal frequency division multiplexing (OFDM) systems with QAM signals. The framework utilizes extreme learning machine (ELM) to achieve fast training, high performance, and low error rates. The proposed framework performs in real-domain by transforming a complex signal into a single 2–tuple real-valued vector. Such transformation offers equalization in real domain with minimum computational load and high accuracy. Simulation results show that the proposed framework outperforms other learning based equalizers in terms of symbol error rates and training speeds

Frequency domain analysis and equalization for molecular communication

Molecular Communication (MC) is a promising micro-scale technology that enables wireless connectivity in electromagnetically challenged conditions. The signal processing approaches in MC are different from conventional wireless communications as molecular signals suffer from severe inter-symbol interference (ISI) and signal-dependent counting noise due to the stochastic diffusion process of the information molecules. One of the main challenges in MC is the high computational complexity of the existing time-domain ISI mitigation schemes that display a third-order polynomial or even exponential growth with the ISI length, which is further exasperated under the high symbol rate case. For the first time, we develop a frequency-domain equalization (FDE) with lower complexity, capable of achieving independence from the ISI effects. This innovation is grounded in our characterization of the channel frequency response of diffusion signals, facilitating the design of receiver sampling strategies. However, the perfect counting noise power is unavailable in the optimal minimum mean square error (MMSE) equalizer. We address this issue by exploiting the statistical information of the transmit signal and decision feedback for noise power estimation, designing novel MMSE equalizers with low complexity. The FDE for MC is successfully developed with its immunity to ISI effects, and its signal processing cost has only a logarithmic growth with symbol length in each block