Development of the TanDEM-X Calibration Concept: Analysis of Systematic Errors

The TanDEM-X mission, result of the partnership between the German Aerospace Center (DLR) and Astrium GmbH, opens a new era in spaceborne radar remote sensing. The first bistatic satellite synthetic aperture radar mission is formed by flying the TanDEM-X and TerraSAR-X in a closely controlled helix formation. The primary mission goal is the derivation of a high-precision global digital elevation model (DEM) according to High-Resolution Terrain Information (HRTI) level 3 accuracy. The finite precision of the baseline knowledge and uncompensated radar instrument drifts introduce errors that may compromise the height accuracy requirements. By means of a DEM calibration, which uses absolute height references, and the information provided by adjacent interferogram overlaps, these height errors can be minimized. This paper summarizes the exhaustive studies of the nature of the residual-error sources that have been carried out during the development of the DEM calibration concept. Models for these errors are set up and simulations of the resulting DEM height error for different scenarios provide the basis for the development of a successful DEM calibration strategy for the TanDEM-X mission

Efficient Raw Signal Generation Based on Equivalent Scatterer and Subaperture Processing for SAR with Arbitrary Motion

An efficient SAR raw signal generation method based on equivalent scatterer and subaperture processing is proposed in this paper. It considers the radar’s motion track, which can obtain the precise raw signal for the real SAR. First, the imaging geometry with arbitrary motion is established, and then the scene is divided into several equidistant rings. Based on the equivalent scatterer model, the approximate expression of the SAR system transfer function is derived, thus each pulse’s raw signal can be generated by the convolution of the transmitted signal and system transfer function, performed by the fast Fourier transform (FFT). To further improve the simulation efficiency, the subaperture and polar subscene processing is used. The system transfer function of pluses for the same subaperture is calculated simultaneously by the weighted sum of all subscenes’ equivalent backscattering coefficient in the same equidistant ring, performed by the nonuniform FFT (NUFFT). The method only involves the FFT, NUFFT and complex multiplication operations, which means the easier implementation and higher efficiency. Simulation results are given to prove the validity of this method

On the usage of GRECOSAR, an orbital polarimetric SAR simulator of complex targets, to vessel classification studies

This paper presents a synthetic aperture radar (SAR) simulator that is able to generate polarimetric SAR (POLSAR) and polarimetric inverse SAR data of complex targets. It solves the electromagnetic problem via high-frequency approximations, such as physical optics and the physical theory of diffraction, with notable computational efficiency. In principle, any orbital monostatic sensor working at any band, resolution, and operating mode can be modeled. To make simulations more realistic, the target’s bearing and speed are considered, and for the particular case of vessels, even the translational and rotational movements induced by the sea state. All these capabilities make the simulator a powerful tool for supplying large amounts of data with precise scenario information and for testing future sensor configurations. In this paper, the usefulness of the simulator on vessel classification studies is assessed. Several simulated polarimetric images are presented to analyze the potentialities of coherent target decompositions for classifying complex geometries, thus basing an operational algorithm. The limitations highlighted by the results suggest that other approaches, like POLSAR interferometry, should be explored.Peer Reviewe

On the usage of GRECOSAR: an orbital polarimetric SAR simulator of complex targets for vessel classification studies

This paper presents a synthetic aperture radar (SAR) simulator that is able to generate polarimetric SAR (POLSAR) and polarimetric inverse SAR data of complex targets. It solves the electromagnetic problem via high-frequency approximations, such as physical optics and the physical theory of diffraction, with notable computational efficiency. In principle, any orbital monostatic sensor working at any band, resolution, and operating mode can be modeled. To make simulations more realistic, the target’s bearing and speed are considered, and for the particular case of vessels, even the translational and rotational movements induced by the sea state. All these capabilities make the simulator a powerful tool for supplying large amounts of data with precise scenario information and for testing future sensor configurations. In this paper, the usefulness of the simulator on vessel classification studies is assessed. Several simulated polarimetric images are presented to analyze the potentialities of coherent target decompositions for classifying complex geometries, thus basing an operational algorithm. The limitations highlighted by the results suggest that other approaches, like POLSAR interferometry, should be explored.Peer Reviewe

Space-based Global Maritime Surveillance. Part I: Satellite Technologies

Maritime surveillance (MS) is crucial for search and rescue operations, fishery monitoring, pollution control, law enforcement, migration monitoring, and national security policies. Since the early days of seafaring, MS has been a critical task for providing security in human coexistence. Several generations of sensors providing detailed maritime information have become available for large offshore areas in real time: maritime radar sensors in the 1950s and the automatic identification system (AIS) in the 1990s among them. However, ground-based maritime radars and AIS data do not always provide a comprehensive and seamless coverage of the entire maritime space. Therefore, the exploitation of space-based sensor technologies installed on satellites orbiting around the Earth, such as satellite AIS data, synthetic aperture radar, optical sensors, and global navigation satellite systems reflectometry, becomes crucial for MS and to complement the existing terrestrial technologies. In the first part of this work, we provide an overview of the main available space-based sensors technologies and present the advantages and limitations of each technology in the scope of MS. The second part, related to artificial intelligence, signal processing and data fusion techniques, is provided in a companion paper, titled: "Space-based Global Maritime Surveillance. Part II: Artificial Intelligence and Data Fusion Techniques" [1].Comment: This paper has been submitted to IEEE Aerospace and Electronic Systems Magazin

Wide-Angle Multistatic Synthetic Aperture Radar: Focused Image Formation and Aliasing Artifact Mitigation

Traditional monostatic Synthetic Aperture Radar (SAR) platforms force the user to choose between two image types: larger, low resolution images or smaller, high resolution images. Switching to a Wide-Angle Multistatic Synthetic Aperture Radar (WAM-SAR) approach allows formation of large high-resolution images. Unfortunately, WAM-SAR suffers from two significant implementation problems. First, wavefront curvature effects, non-linear flight paths, and warped ground planes lead to image defocusing with traditional SAR processing methods. A new 3-D monostatic/bistatic image formation routine solves the defocusing problem, correcting for all relevant wide-angle effects. Inverse SAR (ISAR) imagery from a Radar Cross Section (RCS) chamber validates this approach. The second implementation problem stems from the large Doppler spread in the wide-angle scene, leading to severe aliasing problems. This research effort develops a new anti-aliasing technique using randomized Stepped-Frequency (SF) waveforms to form Doppler filter nulls coinciding with aliasing artifact locations. Both simulation and laboratory results demonstrate effective performance, eliminating more than 99% of the aliased energy

Validation of CReSIS Synthetic Aperture Radar Processor and Optimal Processing Parameters

Sounding the ice sheets of Greenland and Antarctica is a vital component in determining the effect of global warming on sea level rise. Of particular importance are measurements of the bedrock topography of the outlet glaciers that transport ice from the ice sheet's interior to the margin where it calves into icebergs, contributing to sea level rise. These outlet glaciers are difficult to sound due to crevassing caused by the relatively fast movement of the ice in the glacial channel and higher signal attenuation caused by warmer ice. The Center for Remote Sensing of Ice Sheets (CReSIS) uses multi-channel airborne radars which employ methods for achieving better resolution and signal-to-noise ratio (SNR) to better sound outlet glaciers. Synthetic aperture radar (SAR) techniques are used in the along-track dimension, pulse compression in the range dimension, and an antenna array in the cross-track dimension. CReSIS has developed the CReSIS SAR processor (CSARP) to effectively and efficiently process the data collected by these radars in each dimension. To validate the performance of this processor a SAR simulator was developed with the functionality to test the implementation of the processing algorithms in CSARP. In addition to the implementation of this simulator for validation of processing the data in the along-track, cross-track and range dimensions, there are a number of data-dependent processing steps that can affect the quality of the final data product. CSARP was tested with an ideal simulated point target in white Gaussian noise. The SNR change achieved by range compression, azimuth compression, array combination with and without matched filtering, and lever arm application were all within .2 dB of the theoretical expectation. Channel equalization, when paired with noise-based matched filtering, provided 1-2 dB of gain on average but significantly less than the expected gain. Extending the SAR aperture length to sound bedrock will improve the along-track resolution, but at the expense of SNR. Increasing the taper of a window in the fast-time and slow-time will slightly improve the SNR of the data. Changing the relative permittivity used to process the data improved the resulting SNR by no more than 0.025 dB for the test dataset

GNSS transpolar earth reflectometry exploriNg system (G-TERN): mission concept

The global navigation satellite system (GNSS) Transpolar Earth Reflectometry exploriNg system (G-TERN) was proposed in response to ESA's Earth Explorer 9 revised call by a team of 33 multi-disciplinary scientists. The primary objective of the mission is to quantify at high spatio-temporal resolution crucial characteristics, processes and interactions between sea ice, and other Earth system components in order to advance the understanding and prediction of climate change and its impacts on the environment and society. The objective is articulated through three key questions. 1) In a rapidly changing Arctic regime and under the resilient Antarctic sea ice trend, how will highly dynamic forcings and couplings between the various components of the ocean, atmosphere, and cryosphere modify or influence the processes governing the characteristics of the sea ice cover (ice production, growth, deformation, and melt)? 2) What are the impacts of extreme events and feedback mechanisms on sea ice evolution? 3) What are the effects of the cryosphere behaviors, either rapidly changing or resiliently stable, on the global oceanic and atmospheric circulation and mid-latitude extreme events? To contribute answering these questions, G-TERN will measure key parameters of the sea ice, the oceans, and the atmosphere with frequent and dense coverage over polar areas, becoming a “dynamic mapper”of the ice conditions, the ice production, and the loss in multiple time and space scales, and surrounding environment. Over polar areas, the G-TERN will measure sea ice surface elevation (<;10 cm precision), roughness, and polarimetry aspects at 30-km resolution and 3-days full coverage. G-TERN will implement the interferometric GNSS reflectometry concept, from a single satellite in near-polar orbit with capability for 12 simultaneous observations. Unlike currently orbiting GNSS reflectometry missions, the G-TERN uses the full GNSS available bandwidth to improve its ranging measurements. The lifetime would be 2025-2030 or optimally 2025-2035, covering key stages of the transition toward a nearly ice-free Arctic Ocean in summer. This paper describes the mission objectives, it reviews its measurement techniques, summarizes the suggested implementation, and finally, it estimates the expected performance.Peer ReviewedPostprint (published version

An electromagnetic simulator for sentinel-3 sar altimeter waveforms over land part ii: forests

Forests play a crucial role in the climate change mitigation by acting as sinks for carbon and, consequently, reducing the CO2 concentration in the atmosphere and slowing global warming. For this reason, above ground biomass (AGB) estimation is essential for effectively monitoring forest health around the globe. Although remote sensing–based forest AGB quantification can be pursued in different ways, in this work we discuss a new technique for vegetation observation through the use of altimetry data that has been introduced by the ESA-funded ALtimetry for BIOMass (ALBIOM) project. ALBIOM investigates the possibility of retrieving forest biomass through Copernicus Sentinel-3 Synthetic Aperture Radar Altimeter (SRAL) measurements at Ku- and C-bands in low- and high-resolution mode. To reach this goal, a simulator able to reproduce the altimeter acquisition system and the scattering phenomena that occur in the interaction of the radar altimeter pulse with vegetated surfaces has been developed. The Tor Vergata Vegetation Scattering Model (TOVSM) developed at Tor Vergata University has been exploited to simulate the contribution from the vegetation volume via the modelling of the backscattering of forest canopy through a discrete scatterer representation. A modification of the SAVERS (Soil And Vegetation Reflection Simulator) simulator developed by the team for Global Navigation Satellite System Reflectometry over land has also been taken into account to simulate the soil contribution