Bilateral teleoperation under time-varying delay using wave variables.

Bilateral teleoperation systems submitted to time delay are affected by serious stability problems. It's well known than even a small amount of time delay in a closed-loop control system, if untreated, can cause instability. Anyway stability remains the first requirement for any dynamical system. Wave variables method is an important approach that guarantees stability regardless of the time delay. However this method is able to deal with constant time delays. In the thesis wave variables method is reviewed. Particular attention is focused on bilateral teleoperation schemes under time-varying communication delays. Based on the wave variables framework a method to treat with time-varying delay problems is also developed and systematically analyzed

Delay compensation for nonlinear teleoperators using predictor observers

This paper presents a delay compensation technique for nonlinear teleoperators by developing a predictor type sliding mode observer (SMO) that estimates future states of the slave operator. Predicted states are then used in control formulation. In the proposed scheme, disturbance observers (DOB) are also utilized to linearize nonlinear dynamics of the master and slave operators. It is shown that utilization of disturbance observers and predictor observer allow simple PD controllers to be used to provide stable position tracking for bilateral teleoperation. Proposed approach is verified with simulations where it is compared with two state-of-the-art methods. Successful experimental results with a bilateral teleoperation system consisting of a pair of pantograph robots also validates the proposed method

Predictive input delay compensation for motion control systems

This paper presents an analytical approach for the prediction of future motion to be used in input delay compensation of time-delayed motion control systems. The method makes use of the current and previous input values given to a nominally behaving system in order to realize the prediction of the future motion of that system. The generation of the future input is made through an integration which is realized in discrete time setting. Once the future input signal is created, it is used as the reference input of the remote system to enforce an input time delayed system, conduct a delay-free motion. Following the theoretical formulation, the proposed method is tested in experiments and the validity of the approach is verified

A Tele-Operated Display With a Predictive Display Algorithm

Tele-operated display systems with head mounted displays (HMD) are becoming popular as visual feedback systems for tele-operation systems. However, the users are suffered from time-varying bidirectional delays caused by the latency and limited bandwidth of wireless communication networks. Here, we develop a tele-operated display system and a predictive display algorithm allowing comfortable use of HMDs by operators of tele-operation systems. Inspired by the kinematic model of the human head-neck complex, we built a robot neck-camera system to capture the field of view in any desired orientation. To reduce the negative effects of the time-varying bidirectional communication delay and operation delay of the robot neck, we developed a predictive display algorithm based on a kinematic model of the human/robot neck-camera system, and a geometrical model of a camera. Experimental results showed that the system provide predicted images with high frame rate to the user

Control and measurement delay compensation in bilateral position control

The main aim of this study is the improvement of the previously presented disturbance observer based bilateral control approaches of the authors with a delay regulator and a model tracking control (MTC) that runs on the slave side. These improvements eliminate the problems related to variable time delay inherent to such systems and model mismatch, respectively, and, hence, addressing the control and measurement delay problems in bilateral control applications. The performance is evaluated experimentally on a single-link arm controlled over the internet. The results demonstrate a significant improvement over the previously presented results obtained under load uncertainties and randomly varying network delays both in the control and feedback loop

Model following control with discrete time SMC for time-delayed bilateral control systems

This paper proposes a new algorithm based on model following control to recover the uncompensated slave disturbance on time delayed motion control systems having contact with environment. In the previous works, a modified Communication Disturbance Observer (CDOB) was shown to be successful in ensuring position tracking in free motion under varying time delay. However, experiments show that due to the imperfections in slave plant Disturbance Observer (DOB) when there is rapid change of external force on the slave side, as in the case of environment contact, position tracking is degraded. This paper first analyzes the effect of environment contact for motion control systems with disturbance observers. Following this analysis, a model following controller scheme is proposed to restore the ideal motion on the slave system. A virtual plant is introduced which accepts the current from the master side and determines what the position output would be if there was no environment. Based on the error bet ween actual system and model system, a discrete time sliding mode controller is designed which enforces the real slave system to track the virtual slave output. In other words, convergence of slave position to the master position is achieved even though there is contact with environment. Experimental verification of the proposed control scheme also shows the improvement in slave position tracking under contact forces

Stabilization and control of teleoperation systems with time delays

A control scheme for teleoperation systems with time delay is developed based on the concept of passivity. This control method requires neither detailed knowledge of the manipulator systems nor the mathematical models of the environments, and it is applicable for any time delays. The main contribution of this method is that it is less conservative than the traditional passivity based method. In this method, the passivity controller only operates when the system loses passivity, while in a traditional passivity formulation, the controller works at all times during operation and thus adversely affect the performance of the system.;Using the proposed control scheme, a sub-system is defined that is composed of the communication channel, slave robot and the manipulated environment. This sub system is treated as a one-port network component, and passivity theory is applied to this component to assure stability. The energy flowing into the one-port network, in the form of the control command and the force feedback, is monitored. A passivity regulator is activated to maintain the passivity of the network by modifying the feedback force to the master, and thus adjust the energy exchange between the master and the communication channel.;When this method is applied, only the information at the interface between the master manipulator and the communication channel is collected and observed, there is no need for accurate or detailed knowledge of the structure or timing of the communication channel. The method can make the system lossless regardless of the feedback force, the coordinating force controlling the slave joint motions or the contact force. The approach can stabilize the system regardless of the time delay, discontinuities with environmental contact, or discretization of the physical plant. It will pose no problem when the environmental contact force is directly fed back. The results of this work show that it is advantageous to use the measured environmental force as the feedback, providing superior performance for free motion and more realistic haptic feedback for the operator from the remote environment.;Simulation and experimental results are presented to verify the proposed control scheme