External force estimation for telerobotics without force sensor

This paper establishes an approach to external force estimation through the use of a mathematical model and current sensing, without employing a force/torque sensor. The advantages and need for force feedback have been well established in the field of telerobotics. This paper presents the requirement for sensorless force estimation and comparative results between a force sensor and the presented approach using an industrial robot. The approach presents not only a cost effective solution but also a solution for force sensing in hazardous environments, especially ionizing radiation prone environments where the dose rates limit the use of sensing equipment. The paper also discusses the applications and advantages presented by this work in various fields

Bilateral Control - Operational enhancements

A succinct definition of the word bilateral is having two sides [1]. In robotics the term bilateral control is used to define the specific interaction of two systems by means of position and/or force. Bilateral systems are composed of two sides named master and slave side. The aim of such an arrangement is such that position command dictated by master side is followed by a slave side, and at the same time the force sensation of the remote environment experienced by slave is transferred to the mater - human operator. This way bilateral system may be perceived as an “impendanceless” extension of the human operator providing the touch information of the remote (or inaccessible) environment. In a sense bilateral systems are a mechatronics extension of the teleoperated systems. There are many applications of this structure which requires critical manipulations like nuclear material handling, robotic surgery, and micro material handling and assembly. In all these applications a human operator is required to have as close to real as possible contact with object that should be manipulated or in other word the telepresence of the operator is required. In this thesis work various important aspects of bilateral control systems are discussed. These aspects include problems of (i) acquisition of information on master and slave side, (ii) analysis and selection of the proper structure of the control systems to ensure fidelity of the system behavior. The work has been done to enhance the performance of the bilateral control system by: (i) Enhancing position and velocity measurements obtained from incremental encoder having limited number of pulses per revolution. A few algorithms are investigated and their improvements are proposed; (ii) Increasing system robustness by using acceleration controller based on disturbance observer. The robust system design based on disturbance observer is known but its application requires very fast sampling and high bandwidth of the observer. In this work the discrete time realization of the observer is presented in details and selection of the necessary filters and the sampling so to achieve a good trade-off for observer realization is discussed and experimentally confirmed; (iii) Increasing the bandwidth of force sensation by using reaction force observer. For transparent operation of a bilateral system the bandwidth of force sensation is of the major interest. All force sensors do have relatively slow dynamics and observer based structures seems providing better behavior of the overall system. In this work the observer of the interaction force is examined and design procedure is established. In order to verify all of the proposed ideas a versatile bilateral system is designed and built and experimental verification is carried out on this system

Stability Analysis of Teleoperation System by State Convergence with Variable Time Delay

We propose a novel control scheme for bilateral teleoperation of n degree-of-freedom (DOF) nonlinear robotic systems with time-varying communication delay. A major contribution from this work lies in the demonstration that the structure of a state convergence algorithm can be also applied to nth-order nonlinear teleoperation systems. By choosing a Lyapunov Krasovskii functional, we show that the local-remote teleoperation system is asymptotically stable. The time delay of communication channel is assumed to be unknown and randomly time varying, but the upper bounds of the delay interval and the derivative of the delay are assumed to be known

Trajectory Generation for Assembly Tasks Via Bilateral Teleoperation

Abstract in UndeterminedFor assembly tasks, the knowledge of both trajectory and forces are usually required. Consequently, we may use kinesthetics or teleoperation for recording human demonstrations. In order to have a more natural interaction, the operator has to be provided with a sense of touch. We propose a bilateral teleoperation system which is customized for this purpose. We introduce different coordinate frames to make the design of a 6-DOF teleoperation straightforward. Moreover, we suggest using tele-admittance, which simplifies instructing the robot. The compliance due to the slave controller allows the robot to react quickly and reduces the risk of damaging the workpiece

An Implemented of a Real-Time Experimental Setup for Robotic Teleoperation System

The development of this work presents the implementation of an experimental platform, which will permit to investigate on a methodology for the design and analysis of a teleoperated system, considering the delay in the communication channel. The project has been developed in partnership with the laboratory of Automatic and Robotics of the Universidad Politécnica de Madrid and the Laboratory at the Centro de Tecnologías Avanzadas de Manufactura at the Pontificia Universidad Católica del Perú. The mechanical structure of the arm that is located in the remote side has been built and the electric servomechanism has been mounted to control their movement. The experimental test of the Teleoperation system has been developed. The PC104 card commands the power interface and sensors of the DC motor of each articulation of the arm. Has developed the drives for the management of the operations of the master and the slave: send/reception of position, speed, acceleration and current data through a CAN network. The programs for the interconnection through a LAN network, between the Windows Operating System and the Real-time Operating System (QNX), has been developed. The utility of the developed platform (hardware and software) has been demonstrated

Architectural study of the design and operation of advanced force feedback manual controllers

A teleoperator system consists of a manual controller, control hardware/software, and a remote manipulator. It was employed in either hazardous or unstructured, and/or remote environments. In teleoperation, the main-in-the-loop is the central concept that brings human intelligence to the teleoperator system. When teleoperation involves contact with an uncertain environment, providing the feeling of telepresence to the human operator is one of desired characteristics of the teleoperator system. Unfortunately, most available manual controllers in bilateral or force-reflecting teleoperator systems can be characterized by their bulky size, high costs, or lack of smoothness and transparency, and elementary architectures. To investigate other alternatives, a force-reflecting, 3 degree of freedom (dof) spherical manual controller is designed, analyzed, and implemented as a test bed demonstration in this research effort. To achieve an improved level of design to meet criteria such as compactness, portability, and a somewhat enhanced force-reflecting capability, the demonstration manual controller employs high gear-ratio reducers. To reduce the effects of the inertia and friction on the system, various force control strategies are applied and their performance investigated. The spherical manual controller uses a parallel geometry to minimize inertial and gravitational effects on its primary task of transparent information transfer. As an alternative to the spherical 3-dof manual controller, a new conceptual (or parallel) spherical 3-dof module is introduced with a full kinematic analysis. Also, the resulting kinematic properties are compared to those of other typical spherical 3-dof systems. The conceptual design of a parallel 6-dof manual controller and its kinematic analysis is presented. This 6-dof manual controller is similar to the Stewart Platform with the actuators located on the base to minimize the dynamic effects. Finally, a combination of the new 3-dof and 6-dof concepts is presented as a feasible test-bed for enhanced performance in a 9-dof system