Inter-micro-operator interference protection in dynamic TDD system

Abstract. This thesis considers the problem of weighted sum-rate maximization (WSRM) for a system of micro-operators subject to inter-micro-operator interference constraints with dynamic time division duplexing. The WSRM problem is non-convex and non-deterministic polynomial hard. Furthermore, micro-operators require minimum coordination among themselves making the inter-micro-operator interference management very challenging. In this regard, we propose two decentralized precoder design algorithm based on over-the-air bi-directional signalling strategy. We first propose a precoder design algorithm by considering the equivalent weighted minimum mean-squared error minimization reformulation of the WSRM problem. Later we propose precoder design algorithm by considering the weighted sum mean-squared error reformulation. In both approaches, to reduce the huge signalling requirements in centralized design, we use alternating direction method of multipliers technique, wherein each downlink-operator base station and uplink-operator user determines only the relevant set of transmit precoders by exchanging minimal information among the coordinating base stations and user equipments. To minimize the coordination between the uplink-opeator users, we propose interference budget allocation scheme based on reference signal measurements from downlink-operator users. Numerical simulations are provided to compare the performance of proposed algorithms with and without the inter-micro-operator interference constraints

Power minimization in multi-tier networks with flexible duplexing

In this paper we present an algorithm to minimize transmit power in multiple-input multiple-output (MIMO) heterogeneous networks (HetNets) with flexible duplexing, a promising strategy that allows the coexistence of uplink and downlink cells within the same time and frequency resource block. First, the proposed algorithm minimizes transmit power for a given uplink/downlink (UL/DL) combination, and afterwards, the optimal solution out of the explored UL/DL combinations is selected. To reduce the computational cost of exploring all the UL/DL settings, we propose a hierarchical switching (HS) approach that considers a reduced subset of transmit directions. By means of Monte Carlo simulations, we show that the proposed technique provides significant power savings with respect to a conventional time-division duplex (TDD) scheme.This work has been supported by the MINECO of Spain and AEI/FEDER funds from the EU, under grant TEC2016-75067-C4-4-R (CARMEN project) and FPI grant BES-2014-069786

Spatial channel characterization for smart antenna solutions in FDD wireless networks

This paper introduces a novel metric for determining the spatial decorrelation between the up- and down-link wireless bearers in frequency division duplex (FDD) networks. This metric has direct relevance to smart or adaptive antenna array base-station deployments in cellular networks, which are known to offer capacity enhancement when compared to fixed coverage solutions. In particular, the results presented were obtained from field trial measurement campaigns for both urban and rural scenarios, with the observations having a direct impact on the choice of down-link beamforming architecture in FDD applications. Further, it is shown that significant spatial decorrelation can occur in urban deployments for bearer separations as small as 5 MHz. Results are presented in terms of both instantaneous characteristics as well as time averaged estimates, thus facilitating the appraisal of smart antenna solutions in both packet and circuit switched network

Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges

The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band FD has advanced from being demonstrated in research labs to being implemented in standards and products, presenting new opportunities to utilize its foundational concepts. Some of the most significant opportunities include using FD to enable wireless networks to sense the physical environment, integrate sensing and communication applications, develop integrated access and backhaul solutions, and work with smart signal propagation environments powered by reconfigurable intelligent surfaces. However, these new opportunities also come with new challenges for large-scale commercial deployment of FD technology, such as managing self-interference, combating cross-link interference in multi-cell networks, and coexistence of dynamic time division duplex, subband FD and FD networks.Comment: 21 pages, 15 figures, accepted to an IEEE Journa

Feedback Mechanisms for Centralized and Distributed Mobile Systems

The wireless communication market is expected to witness considerable growth in the immediate future due to increasing smart device usage to access real-time data. Mobile devices become the predominant method of Internet access via cellular networks (4G/5G) and the onset of virtual reality (VR), ushering in the wide deployment of multiple bands, ranging from TVWhite Spaces to cellular/WiFi bands and on to mmWave. Multi-antenna techniques have been considered to be promising approaches in telecommunication to optimize the utilization of radio spectrum and minimize the cost of system construction. The performance of multiple antenna technology depends on the utilization of radio propagation properties and feedback of such information in a timely manner. However, when a signal is transmitted, it is usually dispersed over time coming over different paths of different lengths due to reflections from obstacles or affected by Doppler shift in mobile environments. This motivates the design of novel feedback mechanisms that improve the performance of multi-antenna systems. Accurate channel state information (CSI) is essential to increasing throughput in multiinput, multi-output (MIMO) systems with digital beamforming. Channel-state information for the operation of MIMO schemes (such as transmit diversity or spatial multiplexing) can be acquired by feedback of CSI reports in the downlink direction, or inferred from uplink measurements assuming perfect channel reciprocity (CR). However, most works make the assumption that channels are perfectly reciprocal. This assumption is often incorrect in practice due to poor channel estimation and imperfect channel feedback. Instead, experiments have demonstrated that channel reciprocity can be easily broken by multiple factors. Specifically, channel reciprocity error (CRE) introduced by transmitter-receiver imbalance have been widely studied by both simulations and experiments, and the impact of mobility and estimation error have been fully investigated in this thesis. In particular, unmanned aerial vehicles (UAVs) have asymmetric behavior when communicating with one another and to the ground, due to differences in altitude that frequently occur. Feedback mechanisms are also affected by channel differences caused by the user’s body. While there has been work to specifically quantify the losses in signal reception, there has been little work on how these channel differences affect feedback mechanisms. In this dissertation, we perform system-level simulations, implement design with a software defined radio platform, conduct in-field experiments for various wireless communication systems to analyze different channel feedback mechanisms. To explore the feedback mechanism, we then explore two specific real world scenarios, including UAV-based beamforming communications, and user-induced feedback systems

A Comprehensive Investigation of Beam Management Through Conventional and Deep Learning Approach

5G spectrum uses cutting-edge technology which delivers high data rates, low latency, increased capacity, and high spectrum utilization. To cater to these requirements various technologies are available such as Multiple Access Technology (MAT), Multiple Input Multiple Output technology (MIMO), Millimetre (mm) wave technology, Non-Orthogonal Multiple Access Technology (NOMA), Simultaneous Wireless Information and Power Transfer (SWIPT). Of all available technologies, mmWave is prominent as it provides favorable opportunities for 5G. Millimeter-wave is capable of providing a high data rate i.e., 10 Gbit/sec. Also, a tremendous amount of raw bandwidth is available i.e., around 250 GHz, which is an attractive characteristic of the mmWave band to relieve mobile data traffic congestion in the low frequency band. It has a high frequency i.e., 30 – 300 GHz, giving very high speed. It has a very short wavelength i.e., 1-10mm, because of this it provides the compact size of the component. It will provide a throughput of up to 20 Gbps. It has narrow beams and will increase security and reduce interference. When the main beam of the transmitter and receiver are not aligned properly there is a problem in ideal communication. To solve this problem beam management is one of the solutions to form a strong communication link between transmitter and receiver. This paper aims to address challenges in beam management and proposes a framework for realization. Towards the same, the paper initially introduces various challenges in beam management. Towards building an effective beam management system when a user is moving, various steps are present like beam selection, beam tracking, beam alignment, and beam forming. Hence the subsequent sections of the paper illustrate various beam management procedures in mmWave using conventional methods as well as using deep learning techniques. The paper also presents a case study on the framework's implementation using the above-mentioned techniques in mmWave communication. Also glimpses on future research directions are detailed in the final sections. Such beam management techniques when used for mmWave technology will enable build fast, efficient, and capable 5G networks

Spectrum Sharing in Wireless Networks via QoS-Aware Secondary Multicast Beamforming

Secondary spectrum usage has the potential to considerably increase spectrum utilization. In this paper, quality-of-service (QoS)-aware spectrum underlay of a secondary multicast network is considered. A multiantenna secondary access point (AP) is used for multicast (common information) transmission to a number of secondary single-antenna receivers. The idea is that beamforming can be used to steer power towards the secondary receivers while limiting sidelobes that cause interference to primary receivers. Various optimal formulations of beamforming are proposed, motivated by different ldquocohabitationrdquo scenarios, including robust designs that are applicable with inaccurate or limited channel state information at the secondary AP. These formulations are NP-hard computational problems; yet it is shown how convex approximation-based multicast beamforming tools (originally developed without regard to primary interference constraints) can be adapted to work in a spectrum underlay context. Extensive simulation results demonstrate the effectiveness of the proposed approaches and provide insights on the tradeoffs between different design criteria