Optimizing the mmWave Channel Estimation Duration by Rate Prediction

In millimeter-wave (mmWave) wireless communications, the duration of the channel estimation plays a major role to establish the links before data transmission. However, fixed or long channel estimation can substantially hinder the achievable transmit data rates. In this letter, we propose a new scheme that optimizes the channel estimation duration to establish the link between the base station (BS) and a mobile station (MS) in mmWave communications. Before pilot transmissions, the BS predicts the downlink effective rate that would be achieved after channel estimation with the pilot precoder and compares this predicted rate with the current rate, based on the current channel estimates. The proposed scheme optimizes the mmWave channel estimation duration by ending pilot transmissions when the predicted rate is lower than the current rate

Reconfigurable Intelligent Surfaces for Wireless Communications: Principles, Challenges, and Opportunities

Recently there has been a flurry of research on the use of reconfigurable intelligent surfaces (RIS) in wireless networks to create smart radio environments. In a smart radio environment, surfaces are capable of manipulating the propagation of incident electromagnetic waves in a programmable manner to actively alter the channel realization, which turns the wireless channel into a controllable system block that can be optimized to improve overall system performance. In this article, we provide a tutorial overview of reconfigurable intelligent surfaces (RIS) for wireless communications. We describe the working principles of reconfigurable intelligent surfaces (RIS) and elaborate on different candidate implementations using metasurfaces and reflectarrays. We discuss the channel models suitable for both implementations and examine the feasibility of obtaining accurate channel estimates. Furthermore, we discuss the aspects that differentiate RIS optimization from precoding for traditional MIMO arrays highlighting both the arising challenges and the potential opportunities associated with this emerging technology. Finally, we present numerical results to illustrate the power of an RIS in shaping the key properties of a MIMO channel.Comment: to appear in the IEEE Transactions on Cognitive Communications and Networking (TCCN

A Comprehensive Investigation of Beam Management Through Conventional and Deep Learning Approach

5G spectrum uses cutting-edge technology which delivers high data rates, low latency, increased capacity, and high spectrum utilization. To cater to these requirements various technologies are available such as Multiple Access Technology (MAT), Multiple Input Multiple Output technology (MIMO), Millimetre (mm) wave technology, Non-Orthogonal Multiple Access Technology (NOMA), Simultaneous Wireless Information and Power Transfer (SWIPT). Of all available technologies, mmWave is prominent as it provides favorable opportunities for 5G. Millimeter-wave is capable of providing a high data rate i.e., 10 Gbit/sec. Also, a tremendous amount of raw bandwidth is available i.e., around 250 GHz, which is an attractive characteristic of the mmWave band to relieve mobile data traffic congestion in the low frequency band. It has a high frequency i.e., 30 – 300 GHz, giving very high speed. It has a very short wavelength i.e., 1-10mm, because of this it provides the compact size of the component. It will provide a throughput of up to 20 Gbps. It has narrow beams and will increase security and reduce interference. When the main beam of the transmitter and receiver are not aligned properly there is a problem in ideal communication. To solve this problem beam management is one of the solutions to form a strong communication link between transmitter and receiver. This paper aims to address challenges in beam management and proposes a framework for realization. Towards the same, the paper initially introduces various challenges in beam management. Towards building an effective beam management system when a user is moving, various steps are present like beam selection, beam tracking, beam alignment, and beam forming. Hence the subsequent sections of the paper illustrate various beam management procedures in mmWave using conventional methods as well as using deep learning techniques. The paper also presents a case study on the framework's implementation using the above-mentioned techniques in mmWave communication. Also glimpses on future research directions are detailed in the final sections. Such beam management techniques when used for mmWave technology will enable build fast, efficient, and capable 5G networks

Low-Overhead Coordination in Sub-28 Millimeter-Wave Networks

In this paper, we present some contributions from our recent investigation. We address the open issue of interference coordination for sub-28 GHz millimeter-wave communication, by proposing fast-converging coordination algorithms, for dense multi-user multi-cell networks. We propose to optimize a lower bound on the network sum-rate, after investigating its tightness. The bound in question results in distributed optimization, requiring local information at each base station and user. We derive the optimal solution to the transmit and receive filter updates, that we dub non-homogeneous waterfilling, and show its convergence to a stationary point of the bound. We also underline a built-in mechanism to turn-off data streams with low-SINR, and allocate power to high-SNR streams. This "stream control" is a at the root of the fast-converging nature of the algorithm. Our numerical result conclude that low-overhead coordination offers large gains, for dense sub-$28$ GHz systems. These findings bear direct relevance to the ongoing discussions around 5G New Radio.Comment: 7 pages, double column, IEEE ICC 201