6 research outputs found

    Modelling and control of a high redundancy actuator

    Get PDF
    The high redundancy actuation concept is a completely new approach to fault tolerance, and it is important to appreciate that it provides a transformation of the characteristics of actuators so that the actuation performance (capability) degrades slowly rather than suddenly failing, even though individual elements themselves fail. This paper aims to demonstrate the viability of the concept by showing that a highly redundant actuator, comprising a relatively large number of actuation elements, can be controlled in such a way that faults in individual elements are inherently accommodated, although some degradation in overall performance will inevitably be found. The paper introduces the notion of fault-tolerant systems and the highly redundant actuator concept. Then a model for a two by two configuration with electro-mechanical actuation elements is derived. Two classical control approaches are then considered based on frequency domain techniques. Finally simulation results under a number of faults show the viability of the approach for fault accommodation without re-configuratio

    Modelling and control of a high redundancy actuator

    Get PDF
    The high redundancy actuation concept is a completely new approach to fault tolerance, and it is important to appreciate that it provides a transformation of the characteristics of actuators so that the actuation performance (capability) degrades slowly rather than suddenly failing, even though individual elements themselves fail. This paper aims to demonstrate the viability of the concept by showing that a highly redundant actuator, comprising a relatively large number of actuation elements, can be controlled in such a way that faults in individual elements are inherently accommodated, although some degradation in overall performance will inevitably be found. The paper introduces the notion of fault tolerant systems and the highly redundant actuator concept. Then a model for a two by two configuration with electromechanical actuation elements is derived. Two classical control approaches are then considered based on frequency domain techniques. Finally simulation results under a number of faults show the viability of the approach for fault accommodation without reconfiguration

    Real-time sensor data validation

    Get PDF
    This report describes the status of an on-going effort to develop software capable of detecting sensor failures on rocket engines in real time. This software could be used in a rocket engine controller to prevent the erroneous shutdown of an engine due to sensor failures which would otherwise be interpreted as engine failures by the control software. The approach taken combines analytical redundancy with Bayesian belief networks to provide a solution which has well defined real-time characteristics and well-defined error rates. Analytical redundancy is a technique in which a sensor's value is predicted by using values from other sensors and known or empirically derived mathematical relations. A set of sensors and a set of relations among them form a network of cross-checks which can be used to periodically validate all of the sensors in the network. Bayesian belief networks provide a method of determining if each of the sensors in the network is valid, given the results of the cross-checks. This approach has been successfully demonstrated on the Technology Test Bed Engine at the NASA Marshall Space Flight Center. Current efforts are focused on extending the system to provide a validation capability for 100 sensors on the Space Shuttle Main Engine

    Sensor data validation and reconstruction. Phase 1: System architecture study

    Get PDF
    The sensor validation and data reconstruction task reviewed relevant literature and selected applicable validation and reconstruction techniques for further study; analyzed the selected techniques and emphasized those which could be used for both validation and reconstruction; analyzed Space Shuttle Main Engine (SSME) hot fire test data to determine statistical and physical relationships between various parameters; developed statistical and empirical correlations between parameters to perform validation and reconstruction tasks, using a computer aided engineering (CAE) package; and conceptually designed an expert system based knowledge fusion tool, which allows the user to relate diverse types of information when validating sensor data. The host hardware for the system is intended to be a Sun SPARCstation, but could be any RISC workstation with a UNIX operating system and a windowing/graphics system such as Motif or Dataviews. The information fusion tool is intended to be developed using the NEXPERT Object expert system shell, and the C programming language

    Pressure characteristics of impulse-line caused by the pressure fluctuation of process fluid and its application to the diagnostic of field instruments

    Get PDF
    制度:新 ; 報告番号:甲2794号 ; 学位の種類:博士(工学) ; 授与年月日:2009/2/25 ; 早大学位記番号:新501

    High redundancy actuator

    Get PDF
    High Redundancy Actuation (HRA) is a novel type of fault tolerant actuator. By comprising a relatively large number of actuation elements, faults in the elements can be inherently accommodated without resulting in a failure of the complete actuation system. By removing the possibility of faults detection and reconfiguration, HRA can provide high reliability and availability. The idea is motivated by the composition of human musculature. Our musculature can sustain damage and still function, sometimes with reduced performance, and even complete loss of a muscle group can be accommodated through kinematics redundancy, e.g. the use of just one leg. Electro-mechanical actuation is used as single element inside HRA. This thesis is started with modelling and simulation of individual actuation element and two basic structures to connect elements, in series and in parallel. A relatively simple HRA is then modelled which engages a two-by-two series-in-parallel configuration. Based on this HRA, position feedback controllers are designed using both classical and optimal algorithms under two control structures. All controllers are tested under both healthy and faults injected situations. Finally, a hardware demonstrator is set up based simulation studies. The demonstrator is controlled in real time using an xPC Target system. Experimental results show that the HRA can continuously work when one element fails, although performance degradation can be expected.EThOS - Electronic Theses Online ServiceGBUnited Kingdo
    corecore