2,492 research outputs found
AutoAccel: Automated Accelerator Generation and Optimization with Composable, Parallel and Pipeline Architecture
CPU-FPGA heterogeneous architectures are attracting ever-increasing attention
in an attempt to advance computational capabilities and energy efficiency in
today's datacenters. These architectures provide programmers with the ability
to reprogram the FPGAs for flexible acceleration of many workloads.
Nonetheless, this advantage is often overshadowed by the poor programmability
of FPGAs whose programming is conventionally a RTL design practice. Although
recent advances in high-level synthesis (HLS) significantly improve the FPGA
programmability, it still leaves programmers facing the challenge of
identifying the optimal design configuration in a tremendous design space.
This paper aims to address this challenge and pave the path from software
programs towards high-quality FPGA accelerators. Specifically, we first propose
the composable, parallel and pipeline (CPP) microarchitecture as a template of
accelerator designs. Such a well-defined template is able to support efficient
accelerator designs for a broad class of computation kernels, and more
importantly, drastically reduce the design space. Also, we introduce an
analytical model to capture the performance and resource trade-offs among
different design configurations of the CPP microarchitecture, which lays the
foundation for fast design space exploration. On top of the CPP
microarchitecture and its analytical model, we develop the AutoAccel framework
to make the entire accelerator generation automated. AutoAccel accepts a
software program as an input and performs a series of code transformations
based on the result of the analytical-model-based design space exploration to
construct the desired CPP microarchitecture. Our experiments show that the
AutoAccel-generated accelerators outperform their corresponding software
implementations by an average of 72x for a broad class of computation kernels
Transformations of High-Level Synthesis Codes for High-Performance Computing
Specialized hardware architectures promise a major step in performance and
energy efficiency over the traditional load/store devices currently employed in
large scale computing systems. The adoption of high-level synthesis (HLS) from
languages such as C/C++ and OpenCL has greatly increased programmer
productivity when designing for such platforms. While this has enabled a wider
audience to target specialized hardware, the optimization principles known from
traditional software design are no longer sufficient to implement
high-performance codes. Fast and efficient codes for reconfigurable platforms
are thus still challenging to design. To alleviate this, we present a set of
optimizing transformations for HLS, targeting scalable and efficient
architectures for high-performance computing (HPC) applications. Our work
provides a toolbox for developers, where we systematically identify classes of
transformations, the characteristics of their effect on the HLS code and the
resulting hardware (e.g., increases data reuse or resource consumption), and
the objectives that each transformation can target (e.g., resolve interface
contention, or increase parallelism). We show how these can be used to
efficiently exploit pipelining, on-chip distributed fast memory, and on-chip
streaming dataflow, allowing for massively parallel architectures. To quantify
the effect of our transformations, we use them to optimize a set of
throughput-oriented FPGA kernels, demonstrating that our enhancements are
sufficient to scale up parallelism within the hardware constraints. With the
transformations covered, we hope to establish a common framework for
performance engineers, compiler developers, and hardware developers, to tap
into the performance potential offered by specialized hardware architectures
using HLS
Just-in-time Hardware generation for abstracted reconfigurable computing
This thesis addresses the use of reconfigurable hardware in computing platforms, in order to harness the performance benefits of dedicated hardware whilst maintaining the flexibility associated with software. Although the reconfigurable computing concept is not new, the low level nature of the supporting tools normally used, together with the consequent limited level of abstraction and resultant lack of backwards compatibility, has prevented the widespread adoption of this technology. In addition, bandwidth and architectural limitations, have seriously constrained the potential improvements in performance. A review of existing approaches and tools flows is conducted to highlight the current problems being faced in this field. The objective of the work presented in this thesis is to introduce a radically new approach to reconfigurable computing tool flows. The runtime based tool flow introduces complete abstraction between the application developer and the underlying hardware. This new technique eliminates the ease of use and backwards compatibility issues that have plagued the reconfigurable computing concept, and could pave the way for viable mainstream reconfigurable computing platforms. An easy to use, cycle accurate behavioural modelling system is also presented, which was used extensively during the early exploration of new concepts and architectures. Some performance improvements produced by the new reconfigurable computing tool flow, when applied to both a MIPS based embedded platform, and the Cray XDl, are also presented. These results are then analyzed and the hardware and software factors affecting the performance increases that were obtained are discussed, together with potential techniques that could be used to further increase the performance of the system. Lastly a heterogenous computing concept is proposed, in which, a computer system, containing multiple types of computational resource is envisaged, each having their own strengths and weaknesses (e.g. DSPs, CPUs, FPGAs). A revolutionary new method of fully exploiting the potential of such a system, whilst maintaining scalability, backwards compatibility, and ease of use is also presented
A framework for automatically generating optimized digital designs from C-language loops
Reconfigurable computing has the potential for providing significant performance increases to a number of computing applications. However, realizing these benefits requires digital design experience and knowledge of hardware description languages (HDLs). While a number of tools have focused on translation of high-level languages (HLLs) to HDLs, the tools do not always create optimized digital designs that are competitive with hand-coded solutions. This work describes an automatic optimization in the C-to-HDL transformation that reorganizes operations between pipeline stages in order to reduce critical path lengths. The effects of this optimization are examined on the MD5, SHA-1, and Smith-Waterman algorithms. Results show that the optimization results in performance gains of 13%-37% and that the automatically-generated implementations perform comparably to hand-coded implementations
Computer Architectures to Close the Loop in Real-time Optimization
© 2015 IEEE.Many modern control, automation, signal processing and machine learning applications rely on solving a sequence of optimization problems, which are updated with measurements of a real system that evolves in time. The solutions of each of these optimization problems are then used to make decisions, which may be followed by changing some parameters of the physical system, thereby resulting in a feedback loop between the computing and the physical system. Real-time optimization is not the same as fast optimization, due to the fact that the computation is affected by an uncertain system that evolves in time. The suitability of a design should therefore not be judged from the optimality of a single optimization problem, but based on the evolution of the entire cyber-physical system. The algorithms and hardware used for solving a single optimization problem in the office might therefore be far from ideal when solving a sequence of real-time optimization problems. Instead of there being a single, optimal design, one has to trade-off a number of objectives, including performance, robustness, energy usage, size and cost. We therefore provide here a tutorial introduction to some of the questions and implementation issues that arise in real-time optimization applications. We will concentrate on some of the decisions that have to be made when designing the computing architecture and algorithm and argue that the choice of one informs the other
- …