On the anti‐intercept features of noise radars

Robustness against Electronic Warfare/Electronic Defence attacks represents an important advantage of Noise Radar Technology (NRT). An evaluation of the related Low Probability of Detection (LPD) and of Intercept (LPI) is presented for Continuous Emission Noise Radar (CE‐NR) waveforms with different operational parameters, that is, “tailored”, and with various “degrees of randomness”. In this frame, three different noise radar waveforms, a phase Noise (APCN) and two “tailored” noise waveforms (FMeth and COSPAR), are compared by time–frequency analysis. Using a correlator (i.e. a two antennas) receiver, assuming a complete knowledge of the band (B) and duration (T) of the coherent emission of these waveforms, it will be shown that the LPD features of a CE‐NR do not significantly differ from those of any CE radar transmitting deterministic waveforms. However, in real operations, B and T are unknown; hence, assuming an instantaneous bandwidth estimation will show that the duration T can be estimated only for some specific “tailored” waveforms (of course, not to be operationally used). The effect of “tailoring” is analysed with prospects for future work. Finally, some limitations in the classification of these radar signals are analysed

Spectrum sensing for cognitive radio and radar systems

The use of the radio frequency spectrum is increasing at a rapid rate. Reliable and efficient operation in a crowded radio spectrum requires innovative solutions and techniques. Future wireless communication and radar systems should be aware of their surrounding radio environment in order to have the ability to adapt their operation to the effective situation. Spectrum sensing techniques such as detection, waveform recognition, and specific emitter identification are key sources of information for characterizing the surrounding radio environment and extracting valuable information, and consequently adjusting transceiver parameters for facilitating flexible, efficient, and reliable operation. In this thesis, spectrum sensing algorithms for cognitive radios and radar intercept receivers are proposed. Single-user and collaborative cyclostationarity-based detection algorithms are proposed: Multicycle detectors and robust nonparametric spatial sign cyclic correlation based fixed sample size and sequential detectors are proposed. Asymptotic distributions of the test statistics under the null hypothesis are established. A censoring scheme in which only informative test statistics are transmitted to the fusion center is proposed for collaborative detection. The proposed detectors and methods have the following benefits: employing cyclostationarity enables distinction among different systems, collaboration mitigates the effects of shadowing and multipath fading, using multiple strong cyclic frequencies improves the performance, robust detection provides reliable performance in heavy-tailed non-Gaussian noise, sequential detection reduces the average detection time, and censoring improves energy efficiency. In addition, a radar waveform recognition system for classifying common pulse compression waveforms is developed. The proposed supervised classification system classifies an intercepted radar pulse to one of eight different classes based on the pulse compression waveform: linear frequency modulation, Costas frequency codes, binary codes, as well as Frank, P1, P2, P3, and P4 polyphase codes. A robust M-estimation based method for radar emitter identification is proposed as well. A common modulation profile from a group of intercepted pulses is estimated and used for identifying the radar emitter. The M-estimation based approach provides robustness against preprocessing errors and deviations from the assumed noise model

Radar intra-pulse modulation classification using convolutional neural networks

This dissertation presents a detailed investigation into the classification of radar intra-pulse modulation schemes. Recent years have seen increased waveform diversity in radar systems which, while making many aspects of pulse analysis more challenging, have presented new opportunities and features for the _eld of classification. This dissertation aims to address the increasing difficulty of pulse classification through the use of modern machine learning techniques - more specifically, by utilising convolutional neural networks. A wide range of modulation schemes was considered and simulated with realistic imperfections to create a dataset that was as representative of real-world scenarios as possible. Data representations of varying levels of abstraction were analysed in order to investigate the effects of data formatting on the performance of various classifiers. A classifier which made use of manual feature extraction was evaluated against a series of convolutional neural network classifiers in order to establish whether improvements in classification accuracy and throughput could be realised. This study also presents research into the viability of classifying data that has been degraded by real transmitter and channel effects using classifiers trained entirely on simulated data. The operation of the tested classifiers is analysed, and parallels are drawn between the feature extraction steps in convolutional neural networks and conventional signal features. The primary research questions in this study are whether machine learning approaches are able to improve on non-machine learning based classification techniques, and which data representations are best suited to convolutional neural network based classification. Classifiers were tested across 28 classes of modulation, with signal-to-noise ratios uniformly distributed between -5 dB and 20 dB. It was found that substantial performance and stability improvements could be achieved when convolutional neural networks were used over the tested non-machine learning based classification technique. The most promising classifier made use of time-frequency representations as an input, and was able to achieve a classification accuracy of 98%, while exhibiting extreme robustness against noise and pulse imperfections

Radar intra–pulse signal modulation classification with contrastive learning

The existing research on deep learning for radar signal intra–pulse modulation classification is mainly based on supervised leaning techniques, which performance mainly relies on a large number of labeled samples. To overcome this limitation, a self–supervised leaning framework, contrastive learning (CL), combined with the convolutional neural network (CNN) and focal loss function is proposed, called CL––CNN. A two–stage training strategy is adopted by CL–CNN. In the first stage, the model is pretrained using abundant unlabeled time–frequency images, and data augmentation is used to introduce positive–pair and negative–pair samples for self–supervised learning. In the second stage, the pretrained model is fine–tuned for classification, which only uses a small number of labeled time–frequency images. The simulation results demonstrate that CL–CNN outperforms the other deep models and traditional methods in scenarios with Gaussian noise and impulsive noise–affected signals, respectively. In addition, the proposed CL–CNN also shows good generalization ability, i.e., the model pretrained with Gaussian noise–affected samples also performs well on impulsive noise–affected samples

Spread spectrum modulation recognition based on phase diagram entropy

Wireless communication technologies are undergoing intensive study and are experiencing accelerated progress which leads to a large increase in the number of end-users. Because of this, the radio spectrum has become more crowded than ever. These previously mentioned aspects lead to the urgent need for more reliable and intelligent communication systems that can improve the spectrum efficiency. Specifically, modulation scheme recognition occupies a crucial position in the civil and military application, especially with the emergence of Software Defined Radio (SDR). The modulation recognition is an indispensable task while performing spectrum sensing in Cognitive Radio (CR). Spread spectrum (SS) techniques represent the foundation for the design of Cognitive Radio systems. In this work, we propose a new method of characterization of Spread spectrum modulations capable of providing relevant information for the process of recognition of this type of modulations. Using the proposed approach, results higher than 90% are obtained in the modulation classification process, thus bringing an advantage over the classical methods, whose performance is below 75%