Rapid mapping of digital integrated circuit logic gates via multi-spectral backside imaging

Modern semiconductor integrated circuits are increasingly fabricated at untrusted third party foundries. There now exist myriad security threats of malicious tampering at the hardware level and hence a clear and pressing need for new tools that enable rapid, robust and low-cost validation of circuit layouts. Optical backside imaging offers an attractive platform, but its limited resolution and throughput cannot cope with the nanoscale sizes of modern circuitry and the need to image over a large area. We propose and demonstrate a multi-spectral imaging approach to overcome these obstacles by identifying key circuit elements on the basis of their spectral response. This obviates the need to directly image the nanoscale components that define them, thereby relaxing resolution and spatial sampling requirements by 1 and 2 - 4 orders of magnitude respectively. Our results directly address critical security needs in the integrated circuit supply chain and highlight the potential of spectroscopic techniques to address fundamental resolution obstacles caused by the need to image ever shrinking feature sizes in semiconductor integrated circuits

Statistical Power Supply Dynamic Noise Prediction in Hierarchical Power Grid and Package Networks

One of the most crucial high performance systems-on-chip design challenge is to front their power supply noise sufferance due to high frequencies, huge number of functional blocks and technology scaling down. Marking a difference from traditional post physical-design static voltage drop analysis, /a priori dynamic voltage drop/evaluation is the focus of this work. It takes into account transient currents and on-chip and package /RLC/ parasitics while exploring the power grid design solution space: Design countermeasures can be thus early defined and long post physical-design verification cycles can be shortened. As shown by an extensive set of results, a carefully extracted and modular grid library assures realistic evaluation of parasitics impact on noise and facilitates the power network construction; furthermore statistical analysis guarantees a correct current envelope evaluation and Spice simulations endorse reliable result

Automatic synthesis of analog layout : a survey

A review of recent research in the automatic synthesis of physical geometry for analog integrated circuits is presented. On introduction, an explanation of the difficulties involved in analog layout as opposed to digital layout is covered. Review of the literature then follows. Emphasis is placed on the exposition of general methods for addressing problems specific to analog layout, with the details of specific systems only being given when they surve to illustrate these methods well. The conclusion discusses problems remaining and offers a prediction as to how technology will evolve to solve them. It is argued that although progress has been and will continue to be made in the automation of analog IC layout, due to fundamental differences in the nature of analog IC design as opposed to digital design, it should not be expected that the level of automation of the former will reach that of the latter any time soon

Novel TCAD oriented definition of the off-state breakdown voltage in Schottky-gate FETs: a 4H SiC MESFET case study

Physics-based breakdown voltage optimization in Schottky-barrier power RF and microwave field-effect transistors as well as in high-speed power-switching diodes is today an important topic in technology computer-aided design (TCAD). OFF-state breakdown threshold criteria based on the magnitude of the Schottky-barrier leakage current can be directly applied to TCAD; however, the results obtained are not accurate due to the large uncertainty in the Schottky-barrier parameters and models arising above all in advanced wide-gap semiconductors and to the need of performing high-temperature simulations to improve the numerical convergence of the model. In this paper, we suggest a novel OFF-state breakdown criterion, based on monitoring the magnitude (at the drain edge of the gate) of the electric field component parallel to the current density. The new condition is shown to be consistent with more conventional definitions and to exhibit a significantly reduced sensitivity with respect to physical parameter variation

EMI measurement and modeling techniques for complex electronic circuits and modules

This dissertation consists of four papers. In the first paper, a combined model for predicting the most critical radiated emissions and total radiated power due to the display signals in a TV by incorporating the main processing board using the Huygens Equivalence theorem and the radiation due to the flex cable based on active probe measurements was developed. In the second paper, a frequency-tunable resonant magnetic field probe was designed in the frequency range 900-2260 MHz for near-field scanning applications for the radio frequency interference studies by using a varactor diode providing the required capacitance and the parasitic inductance of a magnetic field loop (i.e., a parallel LC circuit). Measurement results showed good agreement with the simulated results. In the third paper, a wideband microwave method was developed as a means for rapid detection of slight dissimilarities (including counterfeit) and aging effects in integrated circuits (ICs) based on measuring the complex reflection coefficient of an IC when illuminated with an open-ended rectangular waveguide probe, at K-band (18-26.5 GHz) and Ka-band (26.5-40 GHz) microwave frequencies. In the fourth paper, a method to predict radiated emissions from DC-DC converters with cables attached on the input side to a LISN and on the output side to a DC brushless motor as load based on linear terminal equivalent circuit modeling was demonstrated. The linear terminal equivalent model was extracted using measured input and output side common mode currents for various characterization impedances connected at the input and output terminals of the converter --Abstract, page iv

Designing Volumetric Truss Structures

We present the first algorithm for designing volumetric Michell Trusses. Our method uses a parametrization approach to generate trusses made of structural elements aligned with the primary direction of an object's stress field. Such trusses exhibit high strength-to-weight ratios. We demonstrate the structural robustness of our designs via a posteriori physical simulation. We believe our algorithm serves as an important complement to existing structural optimization tools and as a novel standalone design tool itself

Optimization techniques for high-performance digital circuits

The relentless push for high performance in custom dig-ital circuits has led to renewed emphasis on circuit opti-mization or tuning. The parameters of the optimization are typically transistor and interconnect sizes. The de-sign metrics are not just delay, transition times, power and area, but also signal integrity and manufacturability. This tutorial paper discusses some of the recently pro-posed methods of circuit optimization, with an emphasis on practical application and methodology impact. Circuit optimization techniques fall into three broad categories. The rst is dynamic tuning, based on time-domain simulation of the underlying circuit, typically combined with adjoint sensitivity computation. These methods are accurate but require the specication of in-put signals, and are best applied to small data- ow cir-cuits and \cross-sections " of larger circuits. Ecient sensitivity computation renders feasible the tuning of cir-cuits with a few thousand transistors. Second, static tuners employ static timing analysis to evaluate the per-formance of the circuit. All paths through the logic are simultaneously tuned, and no input vectors are required. Large control macros are best tuned by these methods. However, in the context of deep submicron custom de-sign, the inaccuracy of the delay models employed by these methods often limits their utility. Aggressive dy-namic or static tuning can push a circuit into a precip-itous corner of the manufacturing process space, which is a problem addressed by the third class of circuit op-timization tools, statistical tuners. Statistical techniques are used to enhance manufacturability or maximize yield. In addition to surveying the above techniques, topics such as the use of state-of-the-art nonlinear optimization methods and special considerations for interconnect siz-ing, clock tree optimization and noise-aware tuning will be brie y considered.

Layout-level Circuit Sizing and Design-for-manufacturability Methods for Embedded RF Passive Circuits

The emergence of multi-band communications standards, and the fast pace of the consumer electronics markets for wireless/cellular applications emphasize the need for fast design closure. In addition, there is a need for electronic product designers to collaborate with manufacturers, gain essential knowledge regarding the manufacturing facilities and the processes, and apply this knowledge during the design process. In this dissertation, efficient layout-level circuit sizing techniques, and methodologies for design-for-manufacturability have been investigated. For cost-effective fabrication of RF modules on emerging technologies, there is a clear need for design cycle time reduction of passive and active RF modules. This is important since new technologies lack extensive design libraries and layout-level electromagnetic (EM) optimization of RF circuits become the major bottleneck for reduced design time. In addition, the design of multi-band RF circuits requires precise control of design specifications that are partially satisfied due to manufacturing variations, resulting in yield loss. In this work, a broadband modeling and a layout-level sizing technique for embedded inductors/capacitors in multilayer substrate has been presented. The methodology employs artificial neural networks to develop a neuro-model for the embedded passives. Secondly, a layout-level sizing technique for RF passive circuits with quasi-lumped embedded inductors and capacitors has been demonstrated. The sizing technique is based on the circuit augmentation technique and a linear optimization framework. In addition, this dissertation presents a layout-level, multi-domain DFM methodology and yield optimization technique for RF circuits for SOP-based wireless applications. The proposed statistical analysis framework is based on layout segmentation, lumped element modeling, sensitivity analysis, and extraction of probability density functions using convolution methods. The statistical analysis takes into account the effect of thermo-mechanical stress and process variations that are incurred in batch fabrication. Yield enhancement and optimization methods based on joint probability functions and constraint-based convex programming has also been presented. The results in this work have been demonstrated to show good correlation with measurement data.Ph.D.Committee Chair: Swaminathan, Madhavan; Committee Member: Fathianathan, Mervyn; Committee Member: Lim, Sung Kyu; Committee Member: Peterson, Andrew; Committee Member: Tentzeris, Mano