747 research outputs found
Recommended from our members
Design of an adaptive neural predictive nonlinear controller for nonholonomic mobile robot system based on posture identifier in the presence of disturbance
This paper proposes an adaptive neural predictive nonlinear controller to guide a nonholonomic wheeled mobile robot during continuous and non-continuous gradients trajectory tracking. The structure of the controller consists of two models that describe the kinematics and dynamics of the mobile robot system and a feedforward neural controller. The models are modified Elman neural network and feedforward multi-layer perceptron respectively. The modified Elman neural network model is trained off-line and on-line stages to guarantee the outputs of the model accurately represent the actual outputs of the mobile robot system. The trained neural model acts as the position and orientation identifier. The feedforward neural controller is trained off-line and adaptive weights are adapted on-line to find the reference torques, which controls the steady-state outputs of the mobile robot system. The feedback neural controller is based on the posture neural identifier and quadratic performance index optimization algorithm to find the optimal torque action in the transient state for N-step-ahead prediction. General back propagation algorithm is used to learn the feedforward neural controller and the posture neural identifier. Simulation results show the effectiveness of the proposed adaptive neural predictive control algorithm; this is demonstrated by the minimised tracking error and the smoothness of the torque control signal obtained with bounded external disturbances
Experimental comparison of control strategies for trajectory tracking for mobile robots
The purpose of this paper is to implement, test and compare the performance of different control strategies for tracking trajectory for mobile robots. The control strategies used are based on linear algebra, PID controller and on a sliding mode controller. Each control scheme is developed taking into consideration the model of the robot. The linear algebra approaches take into account the complete kinematic model of the robot; and the PID and the sliding mode controller use a reduced order model, which is obtained considering the mobile robot platform as a black-box. All the controllers are tested and compared, firstly by simulations and then, by using a Pioneer 3DX robot in field experiments.Fil: Capito, Linda. Escuela PolitĂ©cnica Nacional; EcuadorFil: Proaño, Pablo. Escuela PolitĂ©cnica Nacional; EcuadorFil: Camacho, Oscar. Escuela PolitĂ©cnica Nacional; EcuadorFil: Rosales, AndrĂ©s. Escuela PolitĂ©cnica Nacional; EcuadorFil: Scaglia, Gustavo Juan Eduardo. Universidad Nacional de San Juan. Facultad de IngenierĂa. Instituto de IngenierĂa QuĂmica; Argentina. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - San Juan; Argentin
Sliding Mode Control for Trajectory Tracking of a Non-holonomic Mobile Robot using Adaptive Neural Networks
In this work a sliding mode control method for a non-holonomic mobile robot using an adaptive neural network is proposed. Due to this property and restricted mobility, the trajectory tracking of this system has been one of the research topics for the last ten years. The proposed control structure combines a feedback linearization model, based on a nominal kinematic model, and a practical design that combines an indirect neural adaptation technique with sliding mode control to compensate for the dynamics of the robot. A neural sliding mode controller is used to approximate the equivalent control in the neighbourhood of the sliding manifold, using an online adaptation scheme. A sliding control is appended to ensure that the neural sliding mode control can achieve a stable closed-loop system for the trajectory-tracking control of a mobile robot with unknown non-linear dynamics. Also, the proposed control technique can reduce the steady-state error using the online adaptive neural network with sliding mode control; the design is based on Lyapunov’s theory. Experimental results show that the proposed method is effective in controlling mobile robots with large dynamic uncertaintiesFil: Rossomando, Francisco Guido. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - San Juan. Instituto de Automática. Universidad Nacional de San Juan. Facultad de IngenierĂa. Instituto de Automática; ArgentinaFil: Soria, Carlos Miguel. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - San Juan. Instituto de Automática. Universidad Nacional de San Juan. Facultad de IngenierĂa. Instituto de Automática; ArgentinaFil: Carelli Albarracin, Ricardo Oscar. Consejo Nacional de Investigaciones CientĂficas y TĂ©cnicas. Centro CientĂfico TecnolĂłgico Conicet - San Juan. Instituto de Automática. Universidad Nacional de San Juan. Facultad de IngenierĂa. Instituto de Automática; Argentin
Keep Rollin' - Whole-Body Motion Control and Planning for Wheeled Quadrupedal Robots
We show dynamic locomotion strategies for wheeled quadrupedal robots, which
combine the advantages of both walking and driving. The developed optimization
framework tightly integrates the additional degrees of freedom introduced by
the wheels. Our approach relies on a zero-moment point based motion
optimization which continuously updates reference trajectories. The reference
motions are tracked by a hierarchical whole-body controller which computes
optimal generalized accelerations and contact forces by solving a sequence of
prioritized tasks including the nonholonomic rolling constraints. Our approach
has been tested on ANYmal, a quadrupedal robot that is fully torque-controlled
including the non-steerable wheels attached to its legs. We conducted
experiments on flat and inclined terrains as well as over steps, whereby we
show that integrating the wheels into the motion control and planning framework
results in intuitive motion trajectories, which enable more robust and dynamic
locomotion compared to other wheeled-legged robots. Moreover, with a speed of 4
m/s and a reduction of the cost of transport by 83 % we prove the superiority
of wheeled-legged robots compared to their legged counterparts.Comment: IEEE Robotics and Automation Letter
Whole-Body MPC for a Dynamically Stable Mobile Manipulator
Autonomous mobile manipulation offers a dual advantage of mobility provided
by a mobile platform and dexterity afforded by the manipulator. In this paper,
we present a whole-body optimal control framework to jointly solve the problems
of manipulation, balancing and interaction as one optimization problem for an
inherently unstable robot. The optimization is performed using a Model
Predictive Control (MPC) approach; the optimal control problem is transcribed
at the end-effector space, treating the position and orientation tasks in the
MPC planner, and skillfully planning for end-effector contact forces. The
proposed formulation evaluates how the control decisions aimed at end-effector
tracking and environment interaction will affect the balance of the system in
the future. We showcase the advantages of the proposed MPC approach on the
example of a ball-balancing robot with a robotic manipulator and validate our
controller in hardware experiments for tasks such as end-effector pose tracking
and door opening
A survey on fractional order control techniques for unmanned aerial and ground vehicles
In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade
Safety-critical model predictive control with control barrier function for dynamic obstacle avoidance
In this paper, a safety critical control scheme for a nonholonomic robot is
developed to generate control signals that result in optimal obstacle-free
paths through dynamic environments. A barrier function is used to obtain a
safety envelope for the robot. We formulate the control synthesis problem as an
optimal control problem that enforces control barrier function (CBF)
constraints to achieve obstacle avoidance. A nonlinear model predictive control
(NMPC) with CBF is studied to guarantee system safety and accomplish optimal
performance at a short prediction horizon, which reduces computational burden
in real-time NMPC implementation. An obstacle avoidance constraint under the
Euclidean norm is also incorporated into NMPC to emphasize the effectiveness of
CBF in both point stabilization and trajectory tracking problem of the robot.
The performance of the proposed controller achieving both static and dynamic
obstacle avoidance is verified using several simulation scenarios.Comment: 6 pages, 6 figures, IFAC World Congress 202
- …