Anti-Collision Adaptations of BLE Active Scanning for Dense IoT Tracking Applications

Bluetooth low energy (BLE) is one of most promising technologies to enable the Internet-of-Things (IoT) paradigm. The BLE neighbor discovery process (NDP) based on active scanning may be the core of multiple IoT applications in which a large and varying number of users/devices/tags must be detected in a short period of time. Minimizing the discovery latency and maximizing the number of devices that can be discovered in a limited time are challenging issues due to collisions between frames sent by advertisers and scanners. The mechanism for resolution of collisions between scanners has a great impact on the achieved performance, but backoff in NDP has been poorly studied so far. This paper includes a detailed analysis of backoff in NDP, identifies and studies the factors involved in the process, reveals the limitations and problems presented by the algorithm suggested by the specifications and proposes simple and practical adaptations on scanner functionality. They are easily compatible with the current definitions of the standard, which together with a new proposal for the backoff scheme, may significantly improve the discovery latencies and, thus, the probability of discovering a large number of devices in high density scenarios

PSM-DMO: power save mode and discontinuous BLE mesh operation

The Bluetooth Low Energy (BLE) mesh profile, standardized by the Bluetooth Special Interest Group (SIG), has an increasing interest in IoT solutions. However, the standard assumes that relay and friend nodes should be continuously scanning the channel awaiting any incoming transmissions. This could be very inefficient in terms of energy consumption, particularly in application scenarios where the backbone of the mesh network cannot be powered and traffic is infrequent. Hence, we present a novel strategy, named PSM-DMO, that minimizes the scan periods and thus, significantly reduces the overall energy consumption of the mesh network. PSM-DMO is defined as a new and optional feature for the currently published BLE mesh specifications, coexists with the standard operation, and is implemented without modifying the core of the specification. The proposal, that ensures the reliability of the mesh operation, can be used in BLE sensor networks that can tolerate a certain transmission delay. PSM-DMO replaces the continuous scan by a periodic but asynchronous polling process whereby the relay and sink nodes interrogate their neighbors about the existence of data to receive or to retransmit through the network. Nodes only go into scan mode during the period of time the mesh network will be involved in the transmission and dissemination. This period is estimated by the node which is the source of data, it is announced to its neighbors and it is propagated consecutively by all the relay nodes until the destination. PSM-DMO allows a theoretical reduction in the energy consumption of relay nodes up to 99.24 %.This work has been supported in part by the Spanish Ministry of Science through the projects RTI2018-099880-B-C32. RTI2018-095684-B-I00 and RTI2018-099063-B-I00 with ERFD funds, and by the Government of Aragon (Reference Group T31_20R).Peer ReviewedPostprint (published version

PSM-DMO: power save mode and discontinuous BLE mesh operation

The Bluetooth Low Energy (BLE) mesh profile, standardized by the Bluetooth Special Interest Group (SIG), has an increasing interest in IoT solutions. However, the standard assumes that relay and friend nodes should be continuously scanning the channel awaiting any incoming transmissions. This could be very inefficient in terms of energy consumption, particularly in application scenarios where the backbone of the mesh network cannot be powered and traffic is infrequent. Hence, we present a novel strategy, named PSM-DMO, that minimizes the scan periods and thus, significantly reduces the overall energy consumption of the mesh network. PSM-DMO is defined as a new and optional feature for the currently published BLE mesh specifications, coexists with the standard operation, and is implemented without modifying the core of the specification. The proposal, that ensures the reliability of the mesh operation, can be used in BLE sensor networks that can tolerate a certain transmission delay. PSM-DMO replaces the continuous scan by a periodic but asynchronous polling process whereby the relay and sink nodes interrogate their neighbors about the existence of data to receive or to retransmit through the network. Nodes only go into scan mode during the period of time the mesh network will be involved in the transmission and dissemination. This period is estimated by the node which is the source of data, it is announced to its neighbors and it is propagated consecutively by all the relay nodes until the destination. PSM-DMO allows a theoretical reduction in the energy consumption of relay nodes up to 99.24 %

Informe bibliomètric bimestral Campus Baix Llobregat. Base de dades Scopus. Setembre-octubre 2018

Informe bibliomètric bimestral Campus Baix Llobregat. Base de dades Scopus. Data de la cerca 30/10/2018Postprint (author's final draft

Articles publicats en accés obert al 2018 al Campus del Baix Llobregat

Amb motiu de la setmana mundial de l'accés obert (Open Access Week 2019) presentem aquest document amb els articles publicats en accés obert publicats al 2018 des del Campus del Baix Llobregat a Castelldefels.Postprint (published version

Smart Sensor Technologies for IoT

The recent development in wireless networks and devices has led to novel services that will utilize wireless communication on a new level. Much effort and resources have been dedicated to establishing new communication networks that will support machine-to-machine communication and the Internet of Things (IoT). In these systems, various smart and sensory devices are deployed and connected, enabling large amounts of data to be streamed. Smart services represent new trends in mobile services, i.e., a completely new spectrum of context-aware, personalized, and intelligent services and applications. A variety of existing services utilize information about the position of the user or mobile device. The position of mobile devices is often achieved using the Global Navigation Satellite System (GNSS) chips that are integrated into all modern mobile devices (smartphones). However, GNSS is not always a reliable source of position estimates due to multipath propagation and signal blockage. Moreover, integrating GNSS chips into all devices might have a negative impact on the battery life of future IoT applications. Therefore, alternative solutions to position estimation should be investigated and implemented in IoT applications. This Special Issue, “Smart Sensor Technologies for IoT” aims to report on some of the recent research efforts on this increasingly important topic. The twelve accepted papers in this issue cover various aspects of Smart Sensor Technologies for IoT

AFIT School of Engineering Contributions to Air Force Research and Technology. Calendar Year 1971

This report contains abstracts of Master of Science theses and Doctoral Dissertations completed during the 1971 calendar year at the School of Engineering, Air Force Institute of Technology

Selected Papers from the 5th International Electronic Conference on Sensors and Applications

This Special Issue comprises selected papers from the proceedings of the 5th International Electronic Conference on Sensors and Applications, held on 15–30 November 2018, on sciforum.net, an online platform for hosting scholarly e-conferences and discussion groups. In this 5th edition of the electronic conference, contributors were invited to provide papers and presentations from the field of sensors and applications at large, resulting in a wide variety of excellent submissions and topic areas. Papers which attracted the most interest on the web or that provided a particularly innovative contribution were selected for publication in this collection. These peer-reviewed papers are published with the aim of rapid and wide dissemination of research results, developments, and applications. We hope this conference series will grow rapidly in the future and become recognized as a new way and venue by which to (electronically) present new developments related to the field of sensors and their applications