Angle-of-Arrival Estimation Using Different Phase Shifts Across Subarrays in Localized Hybrid Arrays

© 1997-2012 IEEE. Angle-of-arrival (AoA) estimation, even for a single arriving signal, in a localized hybrid array is challenging and time-consuming due to a phase ambiguity problem. Subarrays use the same phase shifting values conventionally to exploit cross correlation between them. This results in the requirement of scanning multiple angles over excessively long periods to resolve the phase ambiguity problem. In this letter, we propose an approach which allows subarrays to use different phase shifts per estimation and can resolve the ambiguity problem by directly estimating the desired AoA parameter. This can potentially speed up the estimation and improve the estimation performance significantly. Simulation results are provided to demonstrate the effectiveness of the proposed approach

Angle-of-Arrival Estimation Using Difference Beams in Localized Hybrid Arrays.

Angle-of-arrival (AoA) estimation in localized hybrid arrays suffers from phase ambiguity owing to its localized structure and vulnerability to noise. In this letter, we propose a novel phase shift design, allowing each subarray to exploit difference beam steering in two potential AoA directions. This enables the calibration of cross-correlations and an enhanced phase offset estimation between adjacent subarrays. We propose two unambiguous AoA estimation schemes based on the even and odd ratios of the number of antennas per subarray N to the number of different phase shifts per symbol K (i.e., N/K), respectively. The simulation results show that the proposed approach greatly improves the estimation accuracy as compared to the state of the art when the ratio N/K is even

Enhanced AoA estimation using localized hybrid dual-polarized arrays

© 2019 IEEE. With balanced system performance, implementation complexity and hardware cost, hybrid antenna array is regarded as an enabling technology for massive multiple-input and multiple-output communication systems in millimeter wave (mmWave) frequencies. Angle-of-arrival (AoA) estimation using a localized hybrid array faces the challenges of the phase ambiguity problem due to its localized nature of array structure and susceptibility to noises. This paper discusses AoA estimation in an mmWave system employing dual-polarized antennas. We propose an enhanced AoA estimation algorithm using a localized hybrid dual-polarized array for a polarized mmWave signal. First, the use of dual-polarized arrays effectively strengthens the calibration of differential signals and resulting signal-to-noise ratio with coherent polarization combining, leading to an enhanced estimate of the phase offset between adjacent subarrays. Second, given the phase offset, an initial AoA estimate can be obtained, which is used to update the phase offset. By employing the updated one, the AoA is re- estimated with improved accuracy. The closed-form mean square error (MSE) lower bounds of AoA estimation are derived and compared with simulated MSEs. The simulation results show that the proposed algorithm in combination with hybrid dual- polarized arrays significantly improves the estimation accuracy compared with the state of the art

Low-complexity multiuser receiver for massive hybrid array mmwave communications

© 1972-2012 IEEE. In this paper, we study the low complexity reception of multiuser signals in uplink millimeter wave (mmWave) communications using a partially connected hybrid antenna array. Exploiting the mmWave channel property, we propose a low-complexity user-directed multiuser receiver with three novel schemes for allocating subarrays to users. This receiver only requires the knowledge of angles-of-Arrival (AoAs) for dominating paths and a small amount of equivalent channel information instead of perfect channel state information. For comparison, we also derive a successive interference cancellation-based solution as a performance benchmark. We design two types of reference signals with the channel estimation method to enable efficient and simple estimation for AoA and equivalent baseband channel. Also, we provide analytical results for the performance of the AoA estimation, using the lower bounds of mean square errors in line-of-sight dominated mmWave channels. The simulation results validate that the proposed channel estimation method is effective when employed in combination with a zero-forcing equalizer

Angle-of-arrival acquisition and tracking via virtual subarrays in an analog array

© 2019 IEEE. Angle-of-arrival (AoA) estimation is a challenging problem for analog antenna arrays. Typical algorithms use beam scanning and sweeping, which can be time-consuming, and the resolution is limited to the scanning step. In this paper, we propose a virtual-subarray based AoA estimation scheme, which divides an analog array into two virtual subarrays and can obtain a direct AoA estimate from every two temporal measurements. We propose different subarray constructions which lead to different range and accuracy of estimation. We provide detailed beamforming vector designs for these constructions and provide a performance lower bound for the estimator. We also present how to apply the estimator to AoA acquisition and tracking. Simulation results demonstrate that the proposed scheme significantly outperforms existing ones when the signal-to-noise ratio is not very low

Fast and Accurate Estimation of Angle-of-arrival in Millimetre-wave Large-scale Hybrid Arrays

University of Technology Sydney. Faculty of Engineering and Information Technology.Hybrid array is able to leverage array gains, transceiver sizes and costs for massive multiple-input-multiple-output (MIMO) systems in millimetre wave frequencies. Challenges arise from estimation of angle-of-arrival (AoA) in hybrid arrays, due to the array structure and the resultant estimation ambiguities and susceptibility to noises. In this thesis, we study the unambiguous and non-iterative AoA estimation in two types of hybrid arrays | Localized Hybrid Array of Phased SubArrays (LHA-PSAs) and Lens Antenna Arrays (LAAs). For each type, two AoA estimation approaches are proposed for narrowband and wideband, respectively. The main innovation of the approaches include: • The deterministic sign rules and patterns in LHA-PSAs are unprecedentedly discovered, and exploited to eliminate the estimation ambiguities; • The optimal trade-off between different error sources is achieved, minimising the wideband AoA estimation error in LHA-PSAs; • A new wide beam synthesis method is developed for LAAs, which substantially improves the AoA estimation efficiency in LAAs; • New spatial-frequency patterns are unveiled exploiting the spatial-wideband effect, leading to fast and accurate wideband AoA estimation in LAAs. Performance analysis is provided for all the approaches with closed-form estimation (lower) bounds derived. Corroborated by simulations, our approaches are able to dramatically improve AoA estimation accuracy while reducing complexity and the number of training symbols, as compared to the state of the art. The estimation errors of our methods asymptotically approach the (lower) bounds

Design of terahertz transceiver schemes for ultrahigh-speed wireless communications

Future ultra-high-speed wireless communication systems face difficult challenges due to the fundamental limitations of current technologies operating at microwave frequencies. Supporting high transmission rates will require the use of more spectral resources that are only available at higher frequencies. Within this context, terahertz (THz) communications have been attracting more and more attention, being considered by the research community as one of the most promising research fields on the topic due to the availability of extensive unused bandwidth segments. However, its widespread use is not yet possible due to some obstacles, such as the high propagation losses that occur in this band and the difficulty in designing devices that can effectively perform both transmission and detection tasks. The purpose of this dissertation is to contribute for the solution of both of the aforementioned problems and to propose novel THz transceiver schemes for ultra-high-speed wireless communications. Three main research areas were addressed: device modelling for the THz; index modulation (IM) based schemes for Beyond 5G (B5G) networks and hybrid precoding designs for THz ultra massive (UM) – multiple input multiple output (MIMO) systems. The main contributions of this work include the creation of a new design for a reconfigurable THz filter; the proposal of a precoded generalized spatial modulation scheme for downlink MIMO transmissions in B5G networks; the creation of a low-complexity hybrid design algorithm with a near fully-digital performance for multiuser (MU) mmWave/THz ultra massive MIMO systems that can incorporate different analog architectures; and the system-level assessment of cloud radio access network (C-RAN) deployments based on low-complexity hybrid precoding designs for massive MIMO downlink transmissions in B5G networks. The first contribution is especially suited for the implementation of reconfigurable THz filters and optical modulators, since it is based on a simple design, which transits from situations in which it presents a full transparency to situations where it achieves full opacity. Moreover, this approach can also be used for the implementation of simultaneously transmitting and reflecting (STAR) reconfigurable intelligent surfaces (RIS) which are important for enabling flexible system designs in RIS-assisted networks. The second contribution showed that the implementation of precoding schemes based on generalised spatial modulations is a solution with a considerable potential for future B5G systems, since it can provide larger throughputs when compared to conventional MU-MIMO schemes with identical spectral efficiencies.The last two contributions showed that through the proposed hybrid design algorithm it becomes possible to replace a fully digital precoder/combiner by a fully-connected or even by a partially-connected architecture (array of subarrays and dynamic array of subarrays), while achieving good tradeoffs between spectral efficiency, power consumption and implementation complexity. These proposals are particularly relevant for the support of UM-MIMO in severely hardware constrained THz systems. Moreover, the capability of achieving significant improvements in terms of throughput performance and coverage over typical cellular networks, when considering hybrid precoding‐based C-RAN deployments in two indoor office scenarios at the THz band, was demonstrated.Os futuros sistemas de comunicação sem fios de velocidade ultra-elevada enfrentam desafios difíceis devido às limitações fundamentais das tecnologias atuais que funcionam a frequências de microondas. O suporte de taxas de transmissão altas exigirá a utilização de mais recursos espectrais que só estão disponíveis em frequências mais elevadas. A banda Terahertz (THz) é uma das soluções mais promissoras devido às suas enormes larguras de banda disponíveis no espectro eletromagnético. No entanto, a sua utilização generalizada ainda não é possível devido a alguns obstáculos, tais como as elevadas perdas de propagação que se verificam nesta banda e a dificuldade em conceber dispositivos que possam desempenhar eficazmente as tarefas de transmissão e deteção. O objetivo desta tese de doutoramento, é contribuir para ambos os problemas mencionados anteriormente e propor novos esquemas de transcetores THz para comunicações sem fios de velocidade ultra-elevada. Três grandes áreas de investigação foram endereçadas, contribuindo individualmente para um todo: a modelação do dispositivo para o THz; esquemas baseados em modulações de índice (IM) para redes pós-5G (B5G) e desenhos de pré-codificadores híbridos para sistemas THz MIMO ultra-massivos. As principais contribuições deste trabalho incluem a criação de um novo design para um filtro THz reconfigurável; a proposta de uma nova tipologia de modulação espacial generalizada pré-codificada para transmissões MIMO de ligação descendente para redes B5G; a criação de um algoritmo de design híbrido de baixa complexidade com desempenho quase totalmente digital para sistemas MIMO multi-utilizador (MU) mmWave/THz ultra massivos que podem incorporar diferentes arquiteturas analógicas e a avaliação das implementações da rede de acesso de rádio na nuvem (C-RAN) com base em designs de pré-codificação híbridos de baixa complexidade para transmissões MIMO de ligação descendente massivas em redes B5G. A primeira contribuição é especialmente adequada para a implementação de filtros THz reconfiguráveis e moduladores óticos, uma vez que se baseia numa concepção mais simples, que transita de situações em que apresenta uma transparência total para situações em que atinge uma opacidade total. Para além disso, esta abordagem também pode ser utilizada para a implementação de superfícies inteligentes reconfiguráveis (RIS) de transmissão e reflexão simultânea (STAR). A segunda contribuição mostrou que a implementação de esquemas de pré-codificação baseados em modulações espaciais generalizadas é uma solução com um potencial considerável para futuros sistemas B5G, uma vez que permite alcançar maiores ganhos em termos de débito binário quando comparado com esquemas convencionais MU-MIMO com eficiências espectrais idênticas. As duas últimas contribuições mostraram que através do algoritmo proposto torna-se possível substituir a utilização de uma arquitectura totalmente digital por uma arquitetura totalmente conectada ou mesmo por uma arquitetura parcialmente conectada (arrays de subarrays e arrays dinâmicos de subarrays), conseguindo-se bons tradeoffs entre eficiência espectral, consumo de energia e complexidade de implementação. Estas propostas são particularmente relevantes para dar suporte a sistemas THz UM-MIMO com restrições severas ao nível de hardware. Demonstrou-se também a capacidade de se alcançar melhorias significativas em termos de débito binário e cobertura em relação a redes celulares típicas, considerando dois cenários na banda THz

Adaptive Illumination Patterns for Radar Applications

The fundamental goal of Fully Adaptive Radar (FAR) involves full exploitation of the joint, synergistic adaptivity of the radar\u27s transmitter and receiver. Little work has been done to exploit the joint space time Degrees-of-Freedom (DOF) available via an Active Electronically Steered Array (AESA) during the radar\u27s transmit illumination cycle. This research introduces Adaptive Illumination Patterns (AIP) as a means for exploiting this previously untapped transmit DOF. This research investigates ways to mitigate clutter interference effects by adapting the illumination pattern on transmit. Two types of illumination pattern adaptivity were explored, termed Space Time Illumination Patterns (STIP) and Scene Adaptive Illumination Patterns (SAIP). Using clairvoyant knowledge, STIP demonstrates the ability to remove sidelobe clutter at user specified Doppler frequencies, resulting in optimum receiver performance using a non-adaptive receive processor. Using available database knowledge, SAIP demonstrated the ability to reduce training data heterogeneity in dense target environments, thereby greatly improving the minimum discernable velocity achieved through STAP processing