Angle diversity to increase coverage and position accuracy in 3D visible light positioning

The most common approach to light-based indoor positioning relies on multilateration of received signals to the mobile device. Any deficiencies in the fidelity of these light signals can significantly distort position estimates. In this paper, we propose a method to dynamically control the light distribution from the overhead luminaires to mitigate fading effects that would otherwise occur under static lighting. By manipulating the direction of the luminaire, effectively the dispersion pattern, we introduce signal diversity in the form of multiple pointing angles and light distributions. In addition to providing angle diversity, steering and then tracking sustains the maximal line-of-sight path between a source and receiver, which reduces angle-dependent attenuation and optimizes the signal-to-noise ratio for any coordinate without needing to change the physical properties of the source or receiver. This gain in signal strength combats the limited field-of-view of luminaires and photodiodes to provide better overall coverage, which translates directly to increase positioning accuracy, particularly in a 3D space. In the results, we show field-of-view gains of 43% and improvements in MSE of 20cm.Accepted manuscrip

A Survey of Positioning Systems Using Visible LED Lights

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe

Indoor 3D localization with low-cost LiFi components

Indoor positioning or localization is an enabling technology expected to have a profound impact on mobile applications. Various modalities of radio frequency, ultrasound, and light can be used for localization; in this paper we consider how visible light positioning can be realized for 3D positioning as a service comprised of optical sources as part of an overarching lighting infrastructure. Our approach, called Ray-Surface Positioning, uses one or more overhead luminaires, modulated as LiFi, and is used in conjunction with a steerable laser to realize position estimates in three dimensions. In this paper, we build and demonstrate Ray-Surface Positioning using low-cost commodity components in a test apparatus representing one quadrant of a 4m × 4m × 1m volume. Data are collected at regular intervals in the test volume representing 3D position estimates and is validated using a motion capture system. For the low-cost components used, results show position estimate errors of less than 30cm for 95% of the test volume. These results, generated with commodity components, show the potential for 3D positioning in the general case. When the plane of the receiver is known a priori, the position estimate error diminishes to the resolution of the steering mechanism.Accepted manuscrip

Visible light positioning system based on a quadrant photodiode and encoding techniques

Visible light positioning systems (VLPSs) are a feasible alternative to local positioning systems due to the technology improvement and massive use of light-emitting diodes (LEDs). Compared to other technologies, VLPSs can provide significant advantages, such as the achieved accuracy, although they still present some issues, mainly related to the reduced coverage area or the high computational load. This article proposes the design of a VLPS based on four LED lamps as transmitters and a quadrant photodiode angular diversity aperture (QADA) as a receiver. As the shape of the QADA is circular and the aperture to be installed over it is square, we derive the corresponding general equations to obtain the currents through the different pads of the QADA, regarding the angle of incidence of the light (and, inversely, how to estimate the angle of incidence from the measured currents). An encoding scheme based on 1023-bit Kasami sequences is proposed for every transmission from the LED lamps, thus providing multiple access capability and robustness against low signal-to-noise ratios and harsh conditions, such as multipath and near-far effect. A triangulation technique has been applied to estimate the receiver's position, by means of the least-squares estimator (LSE), together with some geometrical considerations. The proposal has been validated by simulation and by experimental tests, obtaining 3-D positioning average errors below 13 and 5.5 cm for separations between the transmitters' plane and the receiver of 2 and 1 m, respectively

An Implementation Approach and Performance Analysis of Image Sensor Based Multilateral Indoor Localization and Navigation System

Optical camera communication (OCC) exhibits considerable importance nowadays in various indoor camera based services such as smart home and robot-based automation. An android smart phone camera that is mounted on a mobile robot (MR) offers a uniform communication distance when the camera remains at the same level that can reduce the communication error rate. Indoor mobile robot navigation (MRN) is considered to be a promising OCC application in which the white light emitting diodes (LEDs) and an MR camera are used as transmitters and receiver respectively. Positioning is a key issue in MRN systems in terms of accuracy, data rate, and distance. We propose an indoor navigation and positioning combined algorithm and further evaluate its performance. An android application is developed to support data acquisition from multiple simultaneous transmitter links. Experimentally, we received data from four links which are required to ensure a higher positioning accuracy

Estimation of the polar angle in a 3D infrared indoor positioning system based on a QADA receiver

2019 International Conference on Indoor Positioning and Indoor Navigation (IPIN), 30 September 2019 - 03 October 2019, Pisa, Italy.Three-dimension infrared positioning systems are a must on indoor local positioning systems, where those based on photodetectors are the most typically used in order not to have complex processing algorithms but a fast positioning computation. Most optical positioning systems are characterized by their low cost, low lifetime, and easy integration on the workplace. This work proposes an infrared positioning system based on four infrared LEDs and a QADA receiver. By applying encoding techniques to the infrared transmissions, the points of incidence from those transmitters on the QADA receiver are simultaneously obtained and the polar angle compensated, in order to finally estimate the receiver?s position. The geometrical considerations of the system have been derived, including the polar angle and its behaviour with regard to the receiver?s position, the angle of incidence and the aperture height. The proposal has been successfully validated by simulation and experimental tests, obtaining positioning errors below 10 cm.Ministerio de Economía y CompetitividadAgencia Estatal de Investigació