Development of an automated robot vision component handling system

Thesis (M. Tech. (Engineering: Electrical)) -- Central University of technology, Free State, 2013In the industry, automation is used to optimize production, improve product quality and increase profitability. By properly implementing automation systems, the risk of injury to workers can be minimized. Robots are used in many low-level tasks to perform repetitive, undesirable or dangerous work. Robots can perform a task with higher precision and accuracy to lower errors and waste of material. Machine Vision makes use of cameras, lighting and software to do visual inspections that a human would normally do. Machine Vision is useful in application where repeatability, high speed and accuracy are important. This study concentrates on the development of a dedicated robot vision system to automatically place components exiting from a conveyor system onto Automatic Guided Vehicles (AGV). A personal computer (PC) controls the automated system. Software modules were developed to do image processing for the Machine Vision system as well as software to control a Cartesian robot. These modules were integrated to work in a real-time system. The vision system is used to determine the parts‟ position and orientation. The orientation data are used to rotate a gripper and the position data are used by the Cartesian robot to position the gripper over the part. Hardware for the control of the gripper, pneumatics and safety systems were developed. The automated system‟s hardware was integrated by the use of the different communication protocols, namely DeviceNet (Cartesian robot), RS-232 (gripper) and Firewire (camera)

Elderly Assist Robot

This project aimed to create a robot capable of assisting elderly people with tasks in their everyday lives. The project focused on the design, simulation, and the implementation of a mobile robotic base with an attached robotic arm. The project culminated in a prototype robot capable of performing basic chassis and arm control which can be used as a platform for future development

Automation and robotic control of a multi-sensor medical device platform

Biocompatibility testing is a complex and time-consuming process that can create significant delays when new medical devices and systems are brought to market. This thesis summarises work performed when automating a platform that incorporates new technologies to speed up the test protocol.As part of the H2020 project PANBioRa, several partners within the consortium have developed sensing technologies for cytotoxicity and cytokine analysis which are intended for inclusion in a multi-test platform. This platform is designed for use in the medical device industry and for use in hospitals, where tests on individuals will provide personal biocompatibility results. Dublin City University has been tasked with integrating the novel sensing methods to determine cell health and to design the system so that it is contained in a user-friendly bench-top unit. The thesis is focused on the design of an autofocusing microscope that will be used to identify cells, test for confluency within cell chambers, and determine cell health throughout the testing process by implementing image processing algorithms. The microscope is designed to obtain approximately 10x magnification and to have a physical size that allows it to move and operate as an end effector of a robotic system, meaning it can navigate to various cell locations. The objective of this project was therefore to design, construction, and validation of a high precision multi-axis robot to control the position and focus of the microscope, while in addition meeting the cost and size demands of the project. With the system being capable of moving the microscope assembly into various positions where cells were present, while with the desired level of accuracy. Continuing to autofocus on cells and collect Images of cells to a level where the desired characteristics could be determined

Proceedings of the 4th field robot event 2006, Stuttgart/Hohenheim, Germany, 23-24th June 2006

Zeer uitgebreid verslag van het 4e Fieldrobotevent, dat gehouden werd op 23 en 24 juni 2006 in Stuttgart/Hohenhei

Automotive Inductive Position Sensor

Inductive angular position sensors (IAPS) are widely used for high accuracy and low cost angular position sensing in harsh automotive environments, such as suspension height sensor and throttle body position sensor. These sensors ensure high resolution and long lifetime due to their contactless sensing mode and their simple structure. Furthermore, they are suitable for wider application areas. For instance, they can be miniaturized to fit into a compact packaging space, or be adopted to measure the relative angle of multiple rotating targets for the purposes of torque sensing. In this work, a detailed SIMULINK model of an IAPS is first proposed in order to study and characterize the sensor performance. The model is validated by finite element analysis and circuit simulation, which provides a powerful design tool for sensor performance analysis. The sensor error introduced by geometry imperfection is thoroughly investigated for two-phase and three-phase configurations, and a corresponding correction method to improve the accuracy is proposed. A design optimization method based on the response surface methodology is also developed and used in the sensor development. Three types of sensors are developed to demonstrate the inductive sensor technology. The first type is the miniaturized inductive sensor. To compensate for the weak signal strength and the reduced quality (Q) factor due to the scaling down effect, a resonant rotor is developed for this type of sensor. This sensor is fabricated by using the electrodeposition technique. The prototype shows an 8mm diameter sensor can function well at 1.5mm air gap. The second type is a steering torque sensor, which is designed to detect the relative torsional angle of a rotating torsional shaft. It demonstrates the mutual coupling of multiple inductive sensors. By selecting a proper layout and compensation algorithm, the torque sensor can achieve 0.1 degree accuracy. The third type is a passive inductive sensor, which is designed to reduce power consumption and electromagnetic emissions. The realization and excellent performance of these three types of sensors have shown the robustness of the inductive sensor technology and its potential applications. The research conducted in this dissertation is expected to improve understanding of the performance analysis of IAPS and provide useful guidelines for the design and performance optimization of inductive sensors

Optical Rotary Sensors for Avionic Applications

RÉSUMÉ Cette thèse concerne des nouveaux capteurs optiques dédiés aux systèmes de contrôle de vol d’avions «fly-by-wire (FBW)». Les capteurs de déplacement sont utilisés dans les systèmes de contrôle de vol pour détecter la distraction du pilote, les déplacements de l'actionneur et ceux de la surface de vol. Actuellement, les capteurs « Rotary variable displacement transducers - RVDTs» utilisés dans les systèmes de contrôle de vol d'avions FBW sont les capteurs basés sur des circuits magnétiques et électroniques analogiques. Donc, une interface électronique est nécessaire pour la démodulation et numérisation des signaux reçus. Par conséquent, des paires de fils longs torsadés sont utilisés pour connecter le RVDT à l’ordinateur installé à bord de l’avion. Les paires de fils torsadés sont lourds et sensibles aux interférences électromagnétiques (IEM) et aux coups de foudre qui peuvent se produire pendant le vol. Nous proposons des capteurs optiques intelligents pour réduire le poids de l’avion, la consommation du carburant pour un environnement vert, l’IEM et pour utiliser moins de pièces métalliques afin de protéger davantage l’avion contre les coups de foudre. La conception des encodeurs de capteurs optiques rotatifs (Optical rotation sensors - ORSs) est basée sur trois exigences importantes, soient la fiabilité, la linéarité, et l’exactitude de mesures. Ces capteurs intégrés dans le système de vol doivent être intelligents. Pour la fiabilité, la réponse du capteur est calculée à partir du ratio des deux puissances optiques ou celui de la différence divisée par la somme de ces deux puissances optiques. Cependant, pour la linéarité, la réponse du capteur consiste en une relation linéaire avec le paramètre à mesurer qui est l’angle de rotation. Quant à l’exactitude, l’erreur doit être moins de 1% sur toute la gamme de mesures. De plus, pour un capteur intelligent, le capteur basé sur des circuits analogiques, les convertisseurs au monde numérique et l’étape de démodulation doivent être emballés dans un boîtier commun. Dans un premier prototype, un capteur de déplacement ratio-métrique, auto-référant, analogique et optique a été proposé pour les applications avioniques. La position de rotation est déterminée par le ratio de deux puissances lumineuses réfléchie et transmise qui rendent le capteur indépendant de fluctuations de puissance. L’encodeur multi-gradient original proposé compense pour l’usage d’une source non-uniforme.----------ABSTRACT This thesis is on novel optical sensors for smart sensor system needed in flight control system (FCS) of fly-by-wire (FBW) aircraft. Displacement sensors are needed in FBW-FCS to detect pilot inceptors, actuator displacements, and flight control surface movement. Currently, the sensors used for rotary variable displacement transducers (RVDTs) are analog electronic sensors, hence an electronic interface is needed for demodulation and digitization of analog signals. As a result, long twisted wires are drawn from the sensor to the flight control computer (FCC) interface which are heavy and susceptible to electromagnetic interference (EMI) and lightning strike. By proposing smart optical sensors, we aim to reduce the aircraft weight to decrease the fuel usage towards a greener environment, reduce EMI, and protect the aircraft against a lightning strike by using fewer metallic parts. The encoders of the optical rotation sensors (ORS) are designed based on three important requirements of reliability, linearity, and accuracy. In addition, they must be smart sensors to be integrated into the smart sensor system needed in FBW aircraft. For reliability requirements, the designed sensor response is the ratio of two optical powers or the ratio of the difference to the sum of two optical powers. For linearity requirement, the sensor response must be a linear relation with the measurand which is the rotation angle. For accuracy requirement, the error should be less than 1% over the full range. In addition, for a smart sensor, the analog sensor and the electronics for digitization and demodulation have to be packaged into a single housing.In the first design, an optical, analog, self-referencing, ratio-metric, smart displacement sensor is proposed for avionic applications. The position of rotation is determined by an encoder by the ratio of the transmitted and reflected light powers, which makes the sensor independent of power fluctuations. A single multi-gradient encoder design compensates for the use of a non-uniform source. An anti-reflection coated glass window with the outer diameter of 27mm is used with an encoder pattern mapped on it using aluminum deposition. The experimental results show that the ratio of the transmitted and reflected powers has an accuracy of 0.53% over the full range, matching the specifications for avionic applications

ROBOTIC LAWN MOWER

The Final Year Project course is designed for students to do research; design and development work in each discipline, to produce practical solutions. It provides opportunity for students to use the tools and techniques of problem-solving by engagement of the project. Under proper guidance of supervisor, the students will shape the direction in the field of interest as a preparation for approaching their desired career path in the near future, as well as gain better understanding of the responsibilities they have to shoulder when they undertake a project. The objective of this project is to produce an automatic robotic lawn mover which is able to cut grass of a specified area of flat land. The first approach to this project is to conduct intensive literature reviews regarding the functions of robots and robotic designs and programming. The Second phase of this project is implementation of the theory to build a functioning robot. The scope of the study would focus on the design and implementation of the robot from scratch. The study is broken down into sub sections, which are electronic circuits, movement mechanism and programming. These subsections are developed and combined until the implementation of the workable robot. In the discussion section, all findings would be discussed in more detail and alternatives are compared as to assure the objectives are met during implementation