Sub-10nm Transistors for Low Power Computing: Tunnel FETs and Negative Capacitance FETs

One of the major roadblocks in the continued scaling of standard CMOS technology is its alarmingly high leakage power consumption. Although circuit and system level methods can be employed to reduce power, the fundamental limit in the overall energy efficiency of a system is still rooted in the MOSFET operating principle: an injection of thermally distributed carriers, which does not allow subthreshold swing (SS) lower than 60mV/dec at room temperature. Recently, a new class of steep-slope devices like Tunnel FETs (TFETs) and Negative-Capacitance FETs (NCFETs) have garnered intense interest due to their ability to surpass the 60mV/dec limit on SS at room temperature. The focus of this research is on the simulation and design of TFETs and NCFETs for ultra-low power logic and memory applications. Using full band quantum mechanical model within the Non-Equilibrium Greens Function (NEGF) formalism, source-underlapping has been proposed as an effective technique to lower the SS in GaSb-InAs TFETs. Band-tail states, associated with heavy source doping, are shown to significantly degrade the SS in TFETs from their ideal value. To solve this problem, undoped source GaSb-InAs TFET in an i-i-n configuration is proposed. A detailed circuit-to-system level evaluation is performed to investigate the circuit level metrics of the proposed devices. To demonstrate their potential in a memory application, a 4T gain cell (GC) is proposed, which utilizes the low-leakage and enhanced drain capacitance of TFETs to realize a robust and long retention time GC embedded-DRAMs. The device/circuit/system level evaluation of proposed TFETs demonstrates their potential for low power digital applications. The second part of the thesis focuses on the design space exploration of hysteresis-free Negative Capacitance FETs (NCFETs). A cross-architecture analysis using HfZrOx ferroelectric (FE-HZO) integrated on bulk MOSFET, fully-depleted SOI-FETs, and sub-10nm FinFETs shows that FDSOI and FinFET configurations greatly benefit the NCFET performance due to their undoped body and improved gate-control which enables better capacitance matching with the ferroelectric. A low voltage NC-FinFET operating down to 0.25V is predicted using ultra-thin 3nm FE-HZO. Next, we propose one-transistor ferroelectric NOR type (Fe-NOR) non-volatile memory based on HfZrOx ferroelectric FETs (FeFETs). The enhanced drain-channel coupling in ultrashort channel FeFETs is utilized to dynamically modulate memory window of storage cells thereby resulting in simple erase-, program-and read-operations. The simulation analysis predicts sub-1V program/erase voltages in the proposed Fe-NOR memory array and therefore presents a significantly lower power alternative to conventional FeRAM and NOR flash memories

Investigation of inversion, accumulation and junctionless mode bulk Germanium FinFETs

The characteristic performance of n-type and p-type inversion (IM) mode, accumulation (AC) mode and junctionless (JL) mode, bulk Germanium FinFET device with 3-nm gate length (LG) are demonstrated by using 3-D quantum transport device simulation. The simulated bulk Ge FinFET device exhibits favorable short channel characteristics, including drain-induced barrier lowering (DIBL<10mV/V), sub threshold slope (SS∼64mV/dec.). Electron density distributions in ON-state and OFF-state also show that the simulated devices have large ION/IOFF ratios. Homogenous source/drain doping is maintained and only the channel doping is varied among different operating modes. Also, a constant threshold voltage |VTH|∼0.31V is maintained. Moreover, the calculated quantum capacitance (CQ) values of the Ge nanowire emphasizes the importance of quantum confinement effects (QCE) on the performance of the ultra-scaled devices

Multiscale Metrology and Optimization of Ultra-Scaled InAs Quantum Well FETs

A simulation methodology for ultra-scaled InAs quantum well field effect transistors (QWFETs) is presented and used to provide design guidelines and a path to improve device performance. A multiscale modeling approach is adopted, where strain is computed in an atomistic valence-force-field method, an atomistic sp3d5s* tight-binding model is used to compute channel effective masses, and a 2-D real-space effective mass based ballistic quantum transport model is employed to simulate three terminal current-voltage characteristics including gate leakage. The simulation methodology is first benchmarked against experimental I-V data obtained from devices with gate lengths ranging from 30 to 50 nm. A good quantitative match is obtained. The calibrated simulation methodology is subsequently applied to optimize the design of a 20 nm gate length device. Two critical parameters have been identified to control the gate leakage magnitude of the QWFETs, (i) the geometry of the gate contact (curved or square) and (ii) the gate metal work function. In addition to pushing the threshold voltage towards an enhancement mode operation, a higher gate metal work function can help suppress the gate leakage and allow for much aggressive insulator scaling

Multiscale Metrology and Optimization of Ultra-Scaled InAs Quantum Well FETs

A simulation methodology for ultra-scaled InAs quantum well field effect transistors (QWFETs) is presented and used to provide design guidelines and a path to improve device performance. A multiscale modeling approach is adopted, where strain is computed in an atomistic valence-force-field method, an atomistic sp3d5s* tight-binding model is used to compute channel effective masses, and a 2-D real-space effective mass based ballistic quantum transport model is employed to simulate three terminal current-voltage characteristics including gate leakage. The simulation methodology is first benchmarked against experimental I-V data obtained from devices with gate lengths ranging from 30 to 50 nm. A good quantitative match is obtained. The calibrated simulation methodology is subsequently applied to optimize the design of a 20 nm gate length device. Two critical parameters have been identified to control the gate leakage magnitude of the QWFETs, (i) the geometry of the gate contact (curved or square) and (ii) the gate metal work function. In addition to pushing the threshold voltage towards an enhancement mode operation, a higher gate metal work function can help suppress the gate leakage and allow for much aggressive insulator scaling

Silicon on ferroelectric insulator field effect transistor (SOF-FET) a new device for the next generation ultra low power circuits

Title from PDF of title page, viewed on March 12, 2014Thesis advisor: Masud H. ChowdhuryVitaIncludes bibliographical references (pages 116-131)Thesis (M. S.)--School of Computer and Engineering. University of Missouri--Kansas City, 2013Field effect transistors (FETs) are the foundation for all electronic circuits and processors. These devices have progressed massively to touch its final steps in subnanometer level. Left and right proposals are coming to rescue this progress. Emerging nano-electronic devices (resonant tunneling devices, single-atom transistors, spin devices, Heterojunction Transistors rapid flux quantum devices, carbon nanotubes, and nanowire devices) took a vast share of current scientific research. Non-Si electronic materials like III-V heterostructure, ferroelectric, carbon nanotubes (CNTs), and other nanowire based designs are in developing stage to become the core technology of non-classical CMOS structures. FinFET present the current feasible commercial nanotechnology. The scalability and low power dissipation of this device allowed for an extension of silicon based devices. High short channel effect (SCE) immunity presents its major advantage. Multi-gate structure comes to light to improve the gate electrostatic over the channel. The new structure shows a higher performance that made it the first candidate to substitute the conventional MOSFET. The device also shows a future scalability to continue Moor’s Law. Furthermore, the device is compatible with silicon fabrication process. Moreover, the ultra-low-power (ULP) design required a subthreshold slope lower than the thermionic-emission limit of 60mV/ decade (KT/q). This value was unbreakable by the new structure (SOI-FinFET). On the other hand most of the previews proposals show the ability to go beyond this limit. However, those pre-mentioned schemes have publicized a very complicated physics, design difficulties, and process non-compatibility. The objective of this research is to discuss various emerging nano-devices proposed for ultra-low-power designs and their possibilities to replace the silicon devices as the core technology in the future integrated circuit. This thesis proposes a novel design that exploits the concept of negative capacitance. The new field effect transistor (FET) based on ferroelectric insulator named Silicon-On-Ferroelectric Insulator Field Effect Transistor (SOF-FET). This proposal is a promising methodology for future ultra-lowpower applications, because it demonstrates the ability to replace the silicon-bulk based MOSFET, and offers subthreshold swing significantly lower than 60mV/decade and reduced threshold voltage to form a conducting channel. The SOF-FET can also solve the issue of junction leakage (due to the presence of unipolar junction between the top plate of the negative capacitance and the diffused areas that form the transistor source and drain). In this device the charge hungry ferroelectric film already limits the leakage.Abstract -- List of illustrations - List of tables -- Acknowledgements -- Dedication -- Introduction -- Carbon nanotube field effect transistor -- Multi-gate transistors -FinFET -- Subthreshold swing -- Tunneling field effect transistors -- I-mos and nanowire fets -- Ferroelectric based field effect transistors -- An analytical model to approximate the subthreshold swing for soi-finfet -- Silicon-on-ferroelectric insulator field effect transistor (SOF-FET) -- Current-voltage characteristics of sof-fet -- Advantages, manufacturing process and future work of the proposed device -- Appendix -- Reference