109 research outputs found

    Narrowband Interference Suppression in Wireless OFDM Systems

    Full text link
    Signal distortions in communication systems occur between the transmitter and the receiver; these distortions normally cause bit errors at the receiver. In addition interference by other signals may add to the deterioration in performance of the communication link. In order to achieve reliable communication, the effects of the communication channel distortion and interfering signals must be reduced using different techniques. The aim of this paper is to introduce the fundamentals of Orthogonal Frequency Division Multiplexing (OFDM) and Orthogonal Frequency Division Multiple Access (OFDMA), to review and examine the effects of interference in a digital data communication link and to explore methods for mitigating or compensating for these effects

    On optimal design and applications of linear transforms

    Get PDF
    Linear transforms are encountered in many fields of applied science and engineering. In the past, conventional block transforms provided acceptable answers to different practical problems. But now, under increasing competitive pressures, with the growing reservoir of theory and a corresponding development of computing facilities, a real demand has been created for methods that systematically improve performance. As a result the past two decades have seen the explosive growth of a class of linear transform theory known as multiresolution signal decomposition. The goal of this work is to design and apply these advanced signal processing techniques to several different problems. The optimal design of subband filter banks is considered first. Several design examples are presented for M-band filter banks. Conventional design approaches are found to present problems when the number of constraints increases. A novel optimization method is proposed using a step-by-step design of a hierarchical subband tree. This method is shown to possess performance improvements in applications such as subband image coding. The subband tree structuring is then discussed and generalized algorithms are presented. Next, the attention is focused on the interference excision problem in direct sequence spread spectrum (DSSS) communications. The analytical and experimental performance of the DSSS receiver employing excision are presented. Different excision techniques are evaluated and ranked along with the proposed adaptive subband transform-based excises. The robustness of the considered methods is investigated for either time-localized or frequency-localized interferers. A domain switchable excision algorithm is also presented. Finally, sonic of the ideas associated with the interference excision problem are utilized in the spectral shaping of a particular biological signal, namely heart rate variability. The improvements for the spectral shaping process are shown for time-frequency analysis. In general, this dissertation demonstrates the proliferation of new tools for digital signal processing

    Filter-Bank-Based Narrowband Interference Detection and Suppression in Spread Spectrum Systems

    Get PDF
    <p/> <p>A filter-bank-based narrowband interference detection and suppression method is developed and its performance is studied in a spread spectrum system. The use of an efficient, complex, critically decimated perfect reconstruction filter bank with a highly selective subband filter prototype, in combination with a newly developed excision algorithm, offers a solution with efficient implementation and performance close to the theoretical limit derived as a function of the filter bank stopband attenuation. Also methods to cope with the transient effects in case of frequency hopping interference are developed and the resulting performance shows only minor degradation in comparison to the stationary case.</p

    Time-Frequency Jammer excision for Multi-carrier spread spectrum using adaptive filtering

    Get PDF
    The development of new wireless technologies, the improvement of existing ones and thereduction on the wireless devices prices is increasing the number of users, the demand forbandwidth and the demand for higher data rates. The spread of the technology howeverbring some drawbacks. One is the increasing interference level that can degrades the wirelesscommunications. Many different techniques are used to minimize the interference and theeffect of the channel (multipath, Doppler etc) in a wireless channel. This thesis considers thefrequency and time processing of a jammer affected multi-carrier spread spectrum (MC-SS)system. A linear chirp is used as a spreading sequence. Such a sequence not only providesa constant envelope, but also allows the estimation of the channel parameters using a lineartime-invariant model. Hence time-delays and Doppler frequency shifts can be representedby effective time shifts. The discrete evolutionary transform (DET) time-frequency repre-sentation is used for estimating the channel characteristics and for detecting jammers. Oncethe jammers are detected, the original spreading function corresponding to the jammed fre-quency is adapted to minimize the jammer effects. The bit detection is then performed usinga least mean square (LMS) adaptive filter and it is done in both time- and frequency-domain.To illustrate the performance of the method, simulations with different signal to noise ratios,different jammer to signal ratios and different Doppler shifts were performed. The resultsindicate that the method is capable of excising the jammers providing a good bit error ratein low Doppler situations

    Adaptive Interference Mitigation in GPS Receivers

    Get PDF
    Satellite navigation systems (GNSS) are among the most complex radio-navigation systems, providing positioning, navigation, and timing (PNT) information. A growing number of public sector and commercial applications rely on the GNSS PNT service to support business growth, technical development, and the day-to-day operation of technology and socioeconomic systems. As GNSS signals have inherent limitations, they are highly vulnerable to intentional and unintentional interference. GNSS signals have spectral power densities far below ambient thermal noise. Consequently, GNSS receivers must meet high standards of reliability and integrity to be used within a broad spectrum of applications. GNSS receivers must employ effective interference mitigation techniques to ensure robust, accurate, and reliable PNT service. This research aims to evaluate the effectiveness of the Adaptive Notch Filter (ANF), a precorrelation mitigation technique that can be used to excise Continuous Wave Interference (CWI), hop-frequency and chirp-type interferences from GPS L1 signals. To mitigate unwanted interference, state-of-the-art ANFs typically adjust a single parameter, the notch centre frequency, and zeros are constrained extremely close to unity. Because of this, the notch centre frequency converges slowly to the target frequency. During this slow converge period, interference leaks into the acquisition block, thus sabotaging the operation of the acquisition block. Furthermore, if the CWI continuously hops within the GPS L1 in-band region, the subsequent interference frequency is locked onto after a delay, which means constant interference occurs in the receiver throughout the delay period. This research contributes to the field of interference mitigation at GNSS's receiver end using adaptive signal processing, predominately for GPS. This research can be divided into three stages. I first designed, modelled and developed a Simulink-based GPS L1 signal simulator, providing a homogenous test signal for existing and proposed interference mitigation algorithms. Simulink-based GPS L1 signal simulator provided great flexibility to change various parameters to generate GPS L1 signal under different conditions, e.g. Doppler Shift, code phase delay and amount of propagation degradation. Furthermore, I modelled three acquisition schemes for GPS signals and tested GPS L1 signals acquisition via coherent and non-coherent integration methods. As a next step, I modelled different types of interference signals precisely and implemented and evaluated existing adaptive notch filters in MATLAB in terms of Carrier to Noise Density (\u1d436/\u1d4410), Signal to Noise Ratio (SNR), Peak Degradation Metric, and Mean Square Error (MSE) at the output of the acquisition module in order to create benchmarks. Finally, I designed, developed and implemented a novel algorithm that simultaneously adapts both coefficients in lattice-based ANF. Mathematically, I derived the full-gradient term for the notch's bandwidth parameter adaptation and developed a framework for simultaneously adapting both coefficients of a lattice-based adaptive notch filter. I evaluated the performance of existing and proposed interference mitigation techniques under different types of interference signals. Moreover, I critically analysed different internal signals within the ANF structure in order to develop a new threshold parameter that resets the notch bandwidth at the start of each subsequent interference frequency. As a result, I further reduce the complexity of the structural implementation of lattice-based ANF, allowing for efficient hardware realisation and lower computational costs. It is concluded from extensive simulation results that the proposed fully adaptive lattice-based provides better interference mitigation performance and superior convergence properties to target frequency compared to traditional ANF algorithms. It is demonstrated that by employing the proposed algorithm, a receiver is able to operate with a higher dynamic range of JNR than is possible with existing methods. This research also presents the design and MATLAB implementation of a parameterisable Complex Adaptive Notch Filer (CANF). Present analysis on higher order CANF for detecting and mitigating various types of interference for complex baseband GPS L1 signals. In the end, further research was conducted to suppress interference in the GPS L1 signal by exploiting autocorrelation properties and discarding some portion of the main lobe of the GPS L1 signal. It is shown that by removing 30% spectrum of the main lobe, either from left, right, or centre, the GPS L1 signal is still acquirable

    Proceedings of the Fall 1995 Advanced Digital Communication Systems

    Get PDF
    Coordinated Science Laboratory was formerly known as Control Systems Laborator

    Narrowband Interference Suppression in Spread Spectrum Communication Systems

    Get PDF
    Of significant interest to the United States military is the ability of an enemy to deny or disrupt the operation of the Global Positioning System. To combat this threat the GPS JPO initiated the Tactical GPS AntiJam Technology project, which yielded a prototype Digital Excision Filter (DEF) to remove narrowband jammers. This research describes the work performed to get the DEF hardware operational and extends the previous research performed in this area. Comdisco\u27s Signal Processing Worksystem was used to examine the effect of the DEF on the probability of bit error. This research uses peak to average correlation value, probability of bit error, and percent jammer power removed to examine the performance of the DEF. Fourteen jamming scenarios are examined using CW, pulsed CW, and broadband noise jammers. The DEF effectively rejected all of the jammers except the broadband noise jammer. In scenarios other than the broadband noise jammer, the DEF removed over 98% of the jammer power. The bit error rate curves show that the DEF significantly enhanced the performance of the system in extreme jamming environments. The results presented in this research show that the DEF is a viable, robust option to remove narrowband interference

    Interference mitigation techniques for wireless OFDM

    Get PDF
    Orthogonal Frequency Division Multiplexing (OFDM) is a promising multicarrier wireless system for transmission of high-rate data stream with spectral efficiency and fading immunity. Conventional OFDM system use efficient IFFT and FFT to multiplex the signals in parallel at the transmitter and receiver respectively. On the other hand, wavelet based OFDM system uses orthonormal wavelets which are derived from a multistage tree-structured wavelet family. The Fourier based and wavelet based OFDM systems are studied in this dissertation. Two types of QAM schemes, circular and square modulations are used to compare the performance in both OFDM systems. A new approach of determining exact BER for optimal circular QAM is proposed. In addition, the presence of narrowband interference (NBI) degrades the performance of OFDM systems. Thus, a mitigation technique is necessary to suppress NBI in an OFDM system. Recent mitigation techniques can be broadly categorized into frequency domain cancellation, receiver windowing and excision filtering. However, none of the techniques considers wavelet based OFDM. Therefore, an interference cancelation algorithm has been proposed to work for both OFDM platforms. The performance results of two OFDM schemes applicable to digital video broadcasting (DVB)-terrestrial system and under the effect of impulsive noise interference are also studied. BER performances are obtained in all results. It has been shown that wavelet based OFDM system has outperformed Fourier based OFDM system in many cases
    • …
    corecore