Comprehensive design and propagation study of a compact dual band antenna for healthcare applications

In this paper, a dual band planar inverted F antenna (PIFA) has been investigated for cooperative on- and off-body communications. Free space and on-body performance parameters like return loss, bandwidth, radiation pattern and efficiency of this antenna are shown and investigated. The on- and off-body radio propagation channel performance at 2.45 GHz and 1.9 GHz have been investigated, respectively. Experimental investigations are performed both in the anechoic chamber and in an indoor environment. The path loss exponent has been extracted for both on- and off-body radio propagation scenarios. For on-body propagation, the path loss exponent is 2.48 and 2.22 in the anechoic chamber and indoor environment, respectively. The path loss exponent is 1.27 for off-body radio propagation situation. For on-body case, the path loss has been characterized for ten different locations on the body at 2.45 GHz, whereas for off-body case radio channel studies are performed for five different locations at 1.9 GHz. The proposed antenna shows a good on- and off-body radio channel performance

Compact and broadband antenna system at UHF

The aim of this research was to study a novel, broadband, low cost, low profile and a high-medium gain antenna in the UHF band. This has been achieved through numerical modelling, theoretical investigation and physical measurements. In this study two commercially available antenna systems are investigated in order to compare and establish potential deficiencies in the UHF antenna systems. A number of disadvantages are resolved within a novel antenna system design. The parametric study is performed for each element of the novel antenna system in order to optimise its overall performance. The indoor and outdoor measurements have been carried out in house, in order to validate the predicted results. The novel antenna system is compared to the most popular and commercially available UHF antenna systems. The study demonstrates that the novel antenna system has clear advantages such as broadband, balanced, compact and low cost when compared to the commercial antenna designs studied here. The comparison of the manufacturers’ data to the measured results shows a good match, validating the outdoor measurements technique used in this research

Diseño y aplicaciones de sistemas de antenas inteligentes para redes inalámbricas en el contexto de la internet de las cosas

[SPA] Esta tesis doctoral se presenta bajo la modalidad de compendio de publicaciones. Las antenas de onda de fuga (LWA) consisten en una estructura de guía de onda que permite la fuga de parte de la potencia a lo largo de la estructura. Por esta razón, la radiación de la antena se produce por la fuga de energía. Para producir una radiación coherente, es necesario controlar esta tasa de radiación a lo largo de la estructura radiante. Así, ajustando con precisión la tasa de radiación, se controla la forma del diagrama de radiación. Las LWAs han sido ampliamente estudiadas por la comunidad científica debido a sus ventajas, tales como, red de alimentación simple, alta directividad y escaneo en frecuencia pasivo. Sin embargo, presentan ciertas desventajas entre las cuales, la más importante a destacar es el efecto de beam-squinting. Éste se produce por la propiedad dispersiva inherente a este tipo de antenas. Además, presentan dificultades a la hora de generar radiación coherente en las direcciones broadside y endfire, aumentando la complejidad del diseńo para la radiación en dichas direcciones. Las LWA han sido relativamente poco utilizadas en aplicaciones prácticas hasta la fecha, a pesar de sus ventajas. Las pocas aplicaciones en las que se han utilizado son los radares de onda continua modulada en frecuencia y los sistemas de enfoque controlado en frecuencia de campo cercano. Esta tesis propone el uso de las LWAs en aplicaciones prácticas aprovechando las ventajas mencionadas anteriormente y teniendo en cuenta los inconvenientes de este tipo de antenas para que su uso no sea limitado. Recientemente, las LWAs han sido propuestas para aplicaciones de localización de bajo coste, ya que permiten el diseńo de estructuras planas con haces directivos. Además, debido al aumento exponencial del uso de la tecnología, es necesario encontrar nuevas tecnologías para una transmisión de datos mayor, más rápida y más eficiente, manteniendo bajos costes de fabricación. Por lo tanto las LWAs pueden ser una solución crucial al mezclar bajos costes de fabricación, alta integrabilidad en diferentes sistemas debido a su tecnología impresa planar y alta directividad al mismo tiempo que se aprovecha su característica dispersiva que proporciona un escaneo pasivo en frecuencia. En este contexto, la principal aportación de esta Tesis consiste en el estudio, análisis, diseńo e integración de LWAs en aplicaciones reales y prácticas. Esta Tesis presenta las siguientes tres contribuciones principales, definidas en los tres bloques principales de este documento: • Estudio y análisis de LWAs para su uso en sistemas de estimación de dirección de llegada basados en técnicas de amplitud de monopulso. Comparar las características y prestaciones de las LWAs junto con las antenas comerciales más utilizadas. Para ello, diseńar y fabricar las HWM-LWAs con el fin de comparar sus prestaciones con las antenas de panel adquiridas comercialmente. Dado que cada aplicación requiere el diseńo de una HWM-LWA nueva y diferente, estudiar y proponer una técnica eficiente de análisis y diseńo de antenas para obtener fácilmente diagramas de radiación monopulso escaneados en frecuencia. • Una vez analizado que las HWM-LWA son una solución factible para su uso en aplicaciones reales de localización debido a sus diversas ventajas. Integrar las HWM-LWAs diseńadas en sistemas digitales para estimación del ángulo de llegada en interiores. Por lo tanto, diseńar, desarrollar, configurar e integrar las LWAs en diferentes sistemas basados en las bandas de frecuencia Wi-Fi ISM de 2,4 GHz y 5 GHz. Finalmente, comparar los resultados de estimación obtenidos con otras soluciones propuestas para corroborar que los LWAs pueden ser utilizados en aplicaciones reales. • Asimismo, debido a su bajo coste de fabricación y a su principal propiedad de escaneo en frecuencia. Ampliar el uso de las LWAs para la localización angular en redes de sensores inalámbricas (WSN) utilizando la banda de frecuencias UHF de 900 MHz. Utilizando así etiquetas RFID pasivas. También estudiar su aplicabilidad en WSNs utilizando etiquetas LoRa activas. Este documento se presenta como una Tesis por compendio, por lo que se presentarán y explicarán brevemente los 4 artículos de revistas que se han publicado durante el programa de doctorado. Además, también se presentarán algunos artículos de conferencias y otros trabajos en revisión para exponer algunas de las investigaciones que no han sido publicadas en revistas hasta la fecha de depósito de tesis. El documento está organizado como se indica a continuación: En la Introducción, se presenta una contextualización del estado del arte y una explicación rigurosa sobre las LWAs y las aplicaciones anteriormente mencionadas. Las dos partes siguientes se vi dedican a presentar y explicar brevemente los trabajos publicados que contribuyen a esta Tesis. En la parte II, se presentan los cuatro artículos que conforman el compendio. Esto es, el análisis de las LWAs para la estimación de la dirección del ángulo de llegada y la integración de las LWAs en sistemas de localización digital usando el protocolo Wi-Fi en el Capítulo 1, la banda de frecuencias ISM UHF 900 MHz se utiliza junto con los HWM-LWAs en el Capítulo 2, luego se implementa en un sistema en tiempo real para la estimación de la dirección de llegada de múltiples tags pasivos en el Capítulo 3 y la integración de LoRa en el Capítulo 4. Finalmente, en la Parte III, se discuten las conclusiones generales y las futuras líneas de investigación. [ENG] This doctoral dissertation has been presented in the form of thesis by publication. Leaky-Wave Antennas (LWA) consist on a waveguide structure which allows the leakage of part of the power along the structure. For this reason, the radiation of the antenna is produced by the leakage of power. In order to produce coherent radiation, it is necessary to control this leakage rate along the radiating structure. Thus, precisely adjusting the leakage rate, the shape of the radiation pattern is controlled. LWAs have been widely studied by the scientific community due to their advantages, such as, simple feeding network, high directivity and passive frequency-scanning performance. However, they present certain disadvantages among which, the most important to highlight is the beam-squinting effect. TThis is due to the inherent dispersion property of this type of antenna. In addition, LWAs present difficulties when generating coherent radiation in broadside and endfire directions, increasing the complexity of the design for radiation in these directions. LWAs have been relatively unused in practical applications to date, despite of their benefits. The few applications in which they have been used are frequency modulated continuous wave radars and near-field frequency controlled focusing systems.This thesis proposes the use of LWAs in practical applications by exploiting the advantages mentioned above while taking into account the drawbacks of this type of antennas so that their use is not limited. Recently, LWAs have been proposed for low-cost localization applications, as they allow the design of planar structures with directive beams. In addition, due to the exponential increase in the use of technology, it is necessary to find new technologies for higher, faster and more efficient data transmission while maintaining low manufacturing costs. Therefore, LWAs can be a crucial solution mixing low manufacturing costs, high integrability in different systems due to their planar printed technology and high directivity while taking advantage of their dispersive characteristic that provides passive frequency scanning. In this context, the main contribution of this Thesis consist of the study, analysis, design and integration of LWAs in real and practical applications. This Thesis presents the following three main contributions, defined in the three main blocks of this document: • Study and analysis of LWAs for its use in direction of arrival estimation systems based on monopulse amplitude techniques. Compare the characteristics and performance of LWAs along with widely used commercial antennas. For this purpose, design and manufacture the HWM-LWAs in order to compare their performance with commercially acquired panel antennas. Since each application requires the design of a new and different HWM-LWA, a main objective of this block is to study and propose an efficient antenna analysis and design technique to facilitate obtaining frequency-scanned monopulse patterns. • Once analyzed that LWAs are a feasible solution for its use in real localization applications due to their several advantages, integrate the designed half-width microstrip (HWM-LWAs) in digital indoor angle-of-arrival estimation systems. Therefore, design, develop, configure and integrate LWAs in different systems based on the Wi-Fi ISM 2.4 GHz and 5 GHz frequency bands. Finally, compare the obtained estimation results with other proposed solutions to corroborate that LWAs can be used in real applications. • Extending the use of antennas for angular localization in sensor networks using the 900 MHz UHF frequency band: the main properties of low manufacturing cost and passive frequency beam scanning can be used in other applications. Thus, the localization estimation of passive RFID tags is studied, as well as their application in Wireless Sensor Networks (WSNs) using active tags with LORA technology. This document is presented as a Thesis by compilation, so the 4 journal articles that have been published during the Ph.D program will be presented and briefly explained. Besides, some conference articles and other work under review will be also presented to expose some of the research that has not been published in journals. The document is organized as outlined hereafter: In Part I, a state-of-the-art contextualization, a rigorous explanation about LWAs and the previous applications mentioned above is presented. The next two parts are dedicated to present and briefly explain the published works included in this Thesis and their main contributions. In Part II the explanation of the four papers which compose the compendium are presented. This is, LWAs analysis for direction of arrival estimation and the integration of LWAs in digital Wi-Fi localization systems in chapter 1, the UHF 900 MHz ISM frequency band is used in conjunction with HWM-LWAs in chapter 2, then, it is implemented in a real time system for direction of arrival estimation of multi RFID tags in chapter 3 and LoRa integration in chapter 4. Finally, in Part III, the overall conclusions and the future research lines are discussed.Esta tesis doctoral se presenta bajo la modalidad de compendio de publicaciones. Está formada por un total de cuatro artículos. Article 1.-: A. Gil-Martinez, M. Poveda-Garcia, J. A. Lopez-Pastor, J. C. Sanchez-Aarnoutse and J. L. Gomez-Tornero, Wi-Fi Direction Finding with Frequency-Scanned Antenna and Channel Hopping Scheme IEEE sensors Journal, , vol. 22, no. 6, pp. 5210-5222, 2022. DOI: 10.1109/JSEN.2021.3122232. Article 2.-: A. Gil-Martinez, M. Poveda-Garcia, D. Cañete-Rebenaque, and J. L. Gomez-Tornero, Frequency-Scanned Monopulse Antenna for RSSI-based Direction Finding of UHF RFID tags IEEE Antennas and Wireless Propagation Letters,, vol. 21, no. 1, pp. 158-162, 2022. DOI: 10.1109/LAWP.2021.3122232. Article 3.-: A. Gil-Martinez, M. Poveda-Garcia, J. Garcia-Fernandez, M. Campo-Valera, D. Cañete-Rebenaque, and J. L. Gomez-Tornero, Direction Finding of RFID tags in UHF Band Using a Passive Beam-Scanning Leaky-Wave Antenna IEEE Journal of Radio Frequency Identi cation, doi: 10.1109/JRFID.2021.3122233. Article 4.-: J. L. Gomez-Tornero, A. Gil-Martinez, M. Poveda-Garcia and D. Cañete-Rebenaque, ARIEL: Passive Beam-Scanning Antenna TeRminal for Iridiscent and E cient LEO Satellite Connectivity in IEEE Antennas and Wireless Propagation Letters, doi: 10.1109/LAWP.2022.3193040.Escuela Internacional de Doctorado de la Universidad Politécnica de CartagenaUniversidad Politécnica de CartagenaPrograma Doctorado en Tecnologías de la Información y las Comunicacione

Indoor Radio Measurement and Planning for UMTS/HSPDA with Antennas

Over the last decade, mobile communication networks have evolved tremendously with a key focus on providing high speed data services in addition to voice. The third generation of mobile networks in the form of Universal Mobile Telecommunications System (UMTS) is already offering revolutionary mobile broadband experience to its users by deploying High Speed Downlink Packet Access (HSDPA) as its packet-data technology. With data speeds up to 14.4 Mbps and ubiquitous mobility, HSDPA is anticipated to become a preferred broadband access medium for end-users via mobile phones, laptops etc. While majority of these end-users are located indoors most of the time, approximately 70-80% of the HSDPA traffic is estimated to originate from inside buildings. Thus for network operators, indoor coverage has become a necessity for technical and business reasons. Macro-cellular (outdoor) to indoor coverage is a natural inexpensive way of providing network coverage inside the buildings. However, it does not guarantee sufficient link quality required for optimal HSDPA operation. On the contrary, deploying a dedicated indoor system may be far too expensive from an operator\u27s point of view. In this thesis, the concept is laid for the understanding of indoor radio wave propagation in a campus building environment which could be used to plan and improve outdoor-to-indoor UMTS/HSDPA radio propagation performance. It will be shown that indoor range performance depends not only on the transmit power of an indoor antenna, but also on the product\u27s response to multipath and obstructions in the environment along the radio propagation path. An extensive measurement campaign will be executed in different indoor environments analogous to easy, medium and hard radio conditions. The effects of walls, ceilings, doors and other obstacles on measurement results would be observed. Chapter one gives a brief introduction to the evolution of UMTS and HSDPA. It goes on to talk about radio wave propagation and some important properties of antennas which must be considered when choosing an antenna for indoor radio propagation. The challenges of in-building network coverage and also the objectives of this thesis are also mentioned in this chapter. The evolution and standardization, network architecture, radio features and most importantly, the radio resource management features of UMTS/HSDPA are given in chapter two. In this chapter, the reason why Wideband Code Division Multiple Access (WCDMA) was specified and selected for 3G (UMTS) systems would be seen. The architecture of the radio access network, interfaces with the radio access network between base stations and radio network controllers (RNC), and the interface between the radio access network and the core network are also described in this chapter. The main features of HSDPA are mentioned at the end of the chapter. In chapter three the principles of the WCDMA air interface, including spreading, Rake reception, signal fading, power control and handovers are introduced. The different types and characteristics of the propagation environments and how they influence radio wave propagation are mentioned. UMTS transport, logical and physical channels are also mentioned, highlighting their significance and relationship in and with the network. Radio network planning for UMTS is discussed in chapter four. The outdoor planning process which includes dimensioning, detailed planning, optimization and monitoring is outlined. Indoor radio planning with distributed antenna systems (DAS), which is the idea and motivation behind this thesis work, is also discussed. The various antennas considered and the antenna that was selected for this thesis experiment was discussed in chapter five. The antenna radiation pattern, directivity, gain and input impedance were the properties of the antenna that were taken into consideration. The importance of the choice of the antenna for any particular type of indoor environment is also mentioned. In chapter six, the design and fabrication of the monopole antennas used for the experimental measurement is mentioned. The procedure for measurement and the equipment used are also discussed. The results gotten from the experiment are finally analyzed and discussed. In this chapter the effect of walls, floors, doors, ceilings and other obstacles on radio wave propagation will be seen. Finally, chapter seven concludes this thesis work and gives some directions for future work

Robust Wearable UHF Antennas for Security Applications

Wearable electronics are occupying an increasing portion of our daily activities. The span of wearable applications extends from purely medical, over different security services to various sports and fashion devices. Antennas play one of the most important roles in wearable networks as they have a key contribution to the overall efficiency of a wearable wireless link. This work focuses on the design and practical realization of robust wearable antennas intended for voice communication inside the Ultra High Frequency (UHF) band. The proposed antennas are mainly envisioned for security services such as military, police or rescue services. To this aim, several questions have been addressed while analyzing and designing the proposed antennas. The on-body environment significantly affects the characteristics of an antenna. The coupling between the antenna and the host body influences both the antenna and the body characteristics. On one hand, the complex lossy nature of the hosting body tends to deteriorate the radiation performances of the wearable antenna, while on the other hand, the radiation from the antenna can cause an increase of the temperature of the wearerâs body (localy and/or of the entire body). The wearability aspect also requires that the size and the profile of the antenna are appropriate so that it can be easily integrated into the wearerâs garment. The size of the wearable antennas becomes more critical at lower frequencies (for instance UHF), where the wavelengths become comparable with the size of the body, thus adding an additional limitation while selecting the type of the antenna. A Planar Inverted F Antenna (PIFA) was selected as an appropriate antenna candidate addressing the introduced specifications. In parallel with the antenna prototype, a suitable technology, combining flexible conductors and stretchable substrates, has been proposed. The suggested technology also enables an adjustment of the electric properties of the designated substrate materials. Several antenna prototypes were successfully designed, fabricated and characterized. Finally, a set of tests in realistic everyday conditions were performed, thus validating the performance of the proposed antenna concepts along with the proposed technology and assessing their potential of being used for commercial purposes. We believe that the obtained results provide useful guidelines for future design of robust flexible wearable antennas

Computational Electromagnetic Studies for Low-Frequency Compensation of the Reflector Impulse-Radiating Antenna

The reflector impulse-radiating antenna (IRA) is considered to meet the requirement for a wideband, directional antenna with short temporal response and small electrical footprint. Standard reflector IRA designs are modeled and performance is simulated using full-wave computational electromagnetic (CEM) software. Characterization of the standard designs reveals the possible existence of wide, frequency-independent backlobes containing nearly 40% of the radiated power at high frequencies. These undesirable backlobes have never been hypothesized, predicted or measured, likely due in part to their alignment outside the primary measurement planes. At the lowest operating frequencies, the reflector IRA is unaffected by backlobes, but is characterized by low radiation efficiency and high resistive losses. Simulated studies are conducted to identify options for enhancing the low-frequency performance of the reflector IRA, including novel multi-arm feed structures and varied resistor distributions and values in the matching circuit component of the antenna design. Both techniques are predicted to provide viable options for enhancing and tuning the performance of the reflector IRA at low frequencies

Adaptations and Analysis of the AFIT Noise Radar Network for Indoor Navigation

After several years of development, the AFIT Noise Radar Network (NoNET) has proven to be an extremely versatile system for many standard radar functions. This pallet of capabilities includes through the wall target tracking capabilities due to its wide bandwidth and UHF operations. Utilizing White Gaussian Noise as its waveform, the NoNET can operate at much lower power levels than other comparable systems while remaining extremely covert. In an effort to explore new applications, the question arose could the NoNET provide a viable option for navigation capability in GPS denied and indoor environments? This research aims to provide proof of concept and demonstration of the navigation function execution with the NoNET in indoor, multipath-ridden environments. Results demonstrate that the NoNET is currently capable of locating a receiver to accuracies of approximately 1 foot. Multipath, background RF interference, and network timing were investigated and solutions to mitigate the limitations imposed by each were developed with the potential to significantly improve accuracy. Future upgrades to the current NoNET hardware package were also investigated in order to provide a near real-time, portable solution to navigation in GPS denied environments

Microwave and Millimeter Wave Technologies A New X-Band Mobile Direction Finder

Non

Design and Modelling of Wireless Power Transfer and Energy Harvesting Systems

The escalation of the Internet-of-Everything topicality has motivated an increased interest in both academia and industry research for efficient solutions enabling self-sustained smart operations. From the maintenance point of view, indeed, battery-less strategies represent the most valuable way for distributed zero-power standalone electronics. With this purpose, different scavenging techniques are being adopted, gathering energy from different sources such as mechanical, solar, thermal and electromagnetic waves. Due to the wide spread of wireless communication systems, the latter technology has recently benefited a renewed interest. This Ph.D. research activity has been focused on the investigation of new efficient solutions for radiofrequency energy harvesting and wireless power transmission techniques, aiming at improving the state of the art, by also taking into account the imperative necessity of eco-friendly materials for the development of green electronics. The combination of radiofrequency energy harvesting and ultra-wideband techniques is also proposed as possible candidate for future RFID systems. These functionalities are integrated in a novel, compact and low-profile tag, whose details are provided thoroughly from both electromagnetic and nonlinear circuit viewpoints. Results validation is provided through experimental characterization. Compatibility with the environment is assured by implementation with recyclable material. This concept is then extended with the investigation of more elaborated energy scavenging architectures, including rectenna arrays. Finally, a near-field wireless power transmission system is presented on low-cost materials, therefore suitable for possible mass-market deployment

Advances in Antennas and High-Frequency Material Characterization for Wireless Body-Area Networks

The development of the personal body-centric communication system is an essential part of the novel generation of wireless communication systems and one of the communication technology challenges. The versatility of body-centric communication revolutionizes healthcare by allowing continuous and in-all- conditions human health monitoring and human-centered authentication. Recently, with the extra-low power consumption and low-complexity backscatter communications, the passive ultra-high-frequency (UHF) radio-frequency identification (RFID) technology has been considered a promising approach for the wireless body area network. An inevitable part of this system is the wearable antenna, which plays a critical role in ensuring the efficient wireless link of the signal in the presence of the wearer. The wearable antenna should be fabricated with textile materials and equipped with various radiation configurations to enhance robustness and the operation’s versatility for long-term use. The difficulty of the wearable antenna development is to obtain the property information of the unknown textile substrate and conductor. To address the above-mentioned challenges, this thesis starts with the novel textile material characterization method to single out the relative permittivity and loss tangent of the substrate and bulk conductivity of the conductor. Unlike conventional approaches, our method simply applied the testing structure of the microstrip line composed of the textile material and simple data processing with the least square estimation. Then, a variation of the textile wearable antenna development with a low-profile planar in geometry is proposed in the next part of the thesis. The headgear RFID tag and forearm RFID reader antennas were developed based on quasi-Yagi configurations and periodic surface to obtain a directive pattern along the body surface. Another type of antenna configuration developed in this thesis is the circular polarization patch antenna for the wearable RFID tag. This type of antenna significantly reduced the polarization mismatch between the reader and the tag; hence, the detection capability and radiation efficiency are remarkably upgraded. The promising performance of the antennas was rigorously analyzed in simulation and verified with on-body measurement