4,602 research outputs found
Towards a universal end effector : the design and development of production technology's intelligent robot hand : a thesis presented in partial fulfilment of the requirements for the degree of Master of Technology in Engineering and Automation at Massey University
Research into robot hands for industrial use began in the early 1980s and there are now many examples of robot hands in existence. The reason for research into robot hands is that standard robot end effectors have to be designed for each application and are therefore costly. A universal end effector is needed that will be able to perform any parts handling operation or use other tools for other industrial operations. Existing robot hand research would therefore benefit from new concepts, designs and control systems. The Department of Production Technology is developing an intelligent robot hand of a novel configuration, with the ultimate aim of producing a universal end effector. The concept of PTIRH (Production Technology's Intelligent Robot Hand) is that it is a multi-fingered manipulator with a configuration of two thumbs and two fingers. Research by the author for this thesis concentrated on five major areas. First, the background research into the state of the art in robot hand research. Second, the initiation, development and analysis of the novel configuration concept of PTIRH. Third, specification, testing and analysis of air muscle actuation, including design, development and testing of a servo pneumatic control valve for the air muscles. Fourth, choice of sensors for the robot hand, including testing and analysis of two custom made air pressure sensors. Fifth, definition, design, construction, development, testing and analysis of the mechanical structure for an early prototype of PTIRH. Development of an intelligent controller for PTIRH was outside the scope of the author's research. The results of the analysis on the air muscles showed that they could be a suitable direct drive actuator for an intelligent robotic hand. The force, pressure and position sensor results indicate that the sensors could form the basis of the feedback loop for an intelligent controller. The configuration of PTIRH enables it to grasp objects with little reliance on friction. This was demonstrated with an early prototype of the robot hand, which had one finger with actuation and three other static digits, by successfully manually arranging the digits into stable grasps of various objects
Multi-fingered robotic hand
A robotic hand is presented having a plurality of fingers, each having a plurality of joints pivotally connected one to the other. Actuators are connected at one end to an actuating and control mechanism mounted remotely from the hand and at the other end to the joints of the fingers for manipulating the fingers and passing externally of the robot manipulating arm in between the hand and the actuating and control mechanism. The fingers include pulleys to route the actuators within the fingers. Cable tension sensing structure mounted on a portion of the hand are disclosed, as is covering of the tip of each finger with a resilient and pliable friction enhancing surface
Design and control of a multi-fingered robot hand provided with tactile feedback
The design, construction, control and application of a three fingered robot hand with nine degrees of freedom and built-in multi-component force sensors is described. The adopted gripper kinematics are justified and optimized with respect to grasping and manipulation flexibility. The hand was constructed with miniature motor drive systems imbedded into the fingers. The control is hierarchically structured and is implemented on a simple PC-AT computer. The hand's dexterity and intelligence are demonstrated with some experiments
Practice of law in the provisioning of accessibility facilities for person with disabilities in Malaysia
Malaysia’s significant changes can be seen clearly through the improvement of social welfare of the disabled and people with disabilities. Although the governments has carried out various policies and provide facilities as well as provision for the disabled but there are still many obstacles encountered by people with disabilities, especially the legal and the accessibility of facilities and services. Therefore, this paper attempts to discuss the practice of law relating of legal procedure particularly for disabled users which affects the movement of these people from one destination to another. This paper discusses the practice of law adopted in the preparation of facilities for disabled people to help them make movement independently. The study was conducted by secondary data to the Malaysia legal and policies for disabled person by comparing with United Kingdom (UK). Malaysia has come out with a strong legal framework for disabled person through People with Disabilities Act 2008 (Act 685). There are several areas in the act that still can be improved to support disabled person
Ground Robotic Hand Applications for the Space Program study (GRASP)
This document reports on a NASA-STDP effort to address research interests of the NASA Kennedy Space Center (KSC) through a study entitled, Ground Robotic-Hand Applications for the Space Program (GRASP). The primary objective of the GRASP study was to identify beneficial applications of specialized end-effectors and robotic hand devices for automating any ground operations which are performed at the Kennedy Space Center. Thus, operations for expendable vehicles, the Space Shuttle and its components, and all payloads were included in the study. Typical benefits of automating operations, or augmenting human operators performing physical tasks, include: reduced costs; enhanced safety and reliability; and reduced processing turnaround time
On Neuromechanical Approaches for the Study of Biological Grasp and Manipulation
Biological and robotic grasp and manipulation are undeniably similar at the
level of mechanical task performance. However, their underlying fundamental
biological vs. engineering mechanisms are, by definition, dramatically
different and can even be antithetical. Even our approach to each is
diametrically opposite: inductive science for the study of biological systems
vs. engineering synthesis for the design and construction of robotic systems.
The past 20 years have seen several conceptual advances in both fields and the
quest to unify them. Chief among them is the reluctant recognition that their
underlying fundamental mechanisms may actually share limited common ground,
while exhibiting many fundamental differences. This recognition is particularly
liberating because it allows us to resolve and move beyond multiple paradoxes
and contradictions that arose from the initial reasonable assumption of a large
common ground. Here, we begin by introducing the perspective of neuromechanics,
which emphasizes that real-world behavior emerges from the intimate
interactions among the physical structure of the system, the mechanical
requirements of a task, the feasible neural control actions to produce it, and
the ability of the neuromuscular system to adapt through interactions with the
environment. This allows us to articulate a succinct overview of a few salient
conceptual paradoxes and contradictions regarding under-determined vs.
over-determined mechanics, under- vs. over-actuated control, prescribed vs.
emergent function, learning vs. implementation vs. adaptation, prescriptive vs.
descriptive synergies, and optimal vs. habitual performance. We conclude by
presenting open questions and suggesting directions for future research. We
hope this frank assessment of the state-of-the-art will encourage and guide
these communities to continue to interact and make progress in these important
areas
Learning and Acting in Peripersonal Space: Moving, Reaching, and Grasping
The young infant explores its body, its sensorimotor system, and the
immediately accessible parts of its environment, over the course of a few
months creating a model of peripersonal space useful for reaching and grasping
objects around it. Drawing on constraints from the empirical literature on
infant behavior, we present a preliminary computational model of this learning
process, implemented and evaluated on a physical robot. The learning agent
explores the relationship between the configuration space of the arm, sensing
joint angles through proprioception, and its visual perceptions of the hand and
grippers. The resulting knowledge is represented as the peripersonal space
(PPS) graph, where nodes represent states of the arm, edges represent safe
movements, and paths represent safe trajectories from one pose to another. In
our model, the learning process is driven by intrinsic motivation. When
repeatedly performing an action, the agent learns the typical result, but also
detects unusual outcomes, and is motivated to learn how to make those unusual
results reliable. Arm motions typically leave the static background unchanged,
but occasionally bump an object, changing its static position. The reach action
is learned as a reliable way to bump and move an object in the environment.
Similarly, once a reliable reach action is learned, it typically makes a
quasi-static change in the environment, moving an object from one static
position to another. The unusual outcome is that the object is accidentally
grasped (thanks to the innate Palmar reflex), and thereafter moves dynamically
with the hand. Learning to make grasps reliable is more complex than for
reaches, but we demonstrate significant progress. Our current results are steps
toward autonomous sensorimotor learning of motion, reaching, and grasping in
peripersonal space, based on unguided exploration and intrinsic motivation.Comment: 35 pages, 13 figure
- …