Efficient space-frequency block coded pilot-aided channel estimation method for multiple-input-multiple-output orthogonal frequency division multiplexing systems over mobile frequency-selective fading channels

© 2014 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.An iterative pilot-aided channel estimation technique for space-frequency block coded (SFBC) multiple-input multiple-output orthogonal frequency division multiplexing systems is proposed. Traditionally, when channel estimation techniques are utilised, the SFBC information signals are decoded one block at a time. In the proposed algorithm, multiple blocks of SFBC information signals are decoded simultaneously. The proposed channel estimation method can thus significantly reduce the amount of time required to decode information signals compared to similar channel estimation methods proposed in the literature. The proposed method is based on the maximum likelihood approach that offers linearity and simplicity of implementation. An expression for the pairwise error probability (PEP) is derived based on the estimated channel. The derived PEP is then used to determine the optimal power allocation for the pilot sequence. The performance of the proposed algorithm is demonstrated in high frequency selective channels, for different number of pilot symbols, using different modulation schemes. The algorithm is also tested under different levels of Doppler shift and for different number of transmit and receive antennas. The results show that the proposed scheme minimises the error margin between slow and high speed receivers compared to similar channel estimation methods in the literature.Peer reviewe

Técnicas de processamento com múltiplas antenas para o sistema LTE

Mestrado em Engenharia Electrónica e TelecomunicaçõesPerformance, mobilidade e partilha podem ser consideras como as três palavras-chave nas comunicações móveis de hoje em dia. Uma das necessidades fundamentais do ser humano é a partilha de experiencias e informação. Com a evolução ao nível do hardware móvel, a crescente popularidade de smartphones, tablets e outros dispositivos moveis, fez com que a exigência em termos de capacidade e taxa de transferência por parte das redes móveis não parasse de crescer. As limitações das redes 3G fizeram com que não conseguissem corresponder a tais exigências e como tal, a transição para uma tecnologia mais robusta e eficiente passou a ser inevitável. A resposta escolhida como solução a longo prazo é a rede designada por LTE, desenvolvida pela organização 3GPP é assumido que será a rede de telecomunicações predominante no futuro. As vantagens mais sonantes são, naturalmente, elevadas taxas de transmissão, maior eficiência espectral, redução da latência e de custos de operação. As principais tecnologias em que o LTE se baseia, são o OFDM e sua variante para múltiplo acesso, OFDMA, usado para o downlink e o SC-FDMA para o uplink. Além disso, usa sistemas com múltiplas antenas para impulsionar a eficiência espectral. Apesar de já implementado em alguns países por diversas operadoras, constantes pesquisas continuam a ser realizadas com o intuito de melhorar a sua performance. Nesta dissertação é proposto um esquema duplo de codificação na frequência e no espaço (D-SFBC) para um cenário baseado em OFDM com 4 antenas de transmissão e duas antenas de recepção (4 × 2 D-SFBC) para o downlink. No cenário considerado, 4 símbolos de dados são transmitidos utilizando unicamente 2 sub-portadoras, fazendo com que, este sistema seja limitado pela interferência. Para de forma eficiente descodificar os símbolos de dados transmitidos, foi desenvolvido um equalizador iterativo no domínio da frequência. Duas abordagens são consideradas: cancelamento da interferência em paralelo (PIC) e sucessivo cancelamento de interferência (SIC). Uma vez que apenas 2 sub-portadoras são usadas para transmitir quatro símbolos de dados em paralelo, o esquema desenvolvido duplica a taxa de dados quando comparado com o esquema 2 × 2 SFBC, especificado no standard do LTE. Os esquemas desenvolvidos foram avaliados sob as especificações para LTE e usando codificação de canal. Os resultados mostram que os esquemas implementados neste trabalho utilizando um equalizador iterativo supera os convencionais equalizadores lineares na eliminação da interferência adicional introduzida, em apenas 2 ou 3 iterações.Performance, mobility and sharing can be assumed as the three keywords in the mobile communications nowadays. One of the fundamental needs of human beings is to share experiences and information. With the evolution of mobile hardware level, the growing popularity of smartphones, tablets and other mobile devices, has made that the demand in terms of capacity and throughput by mobile networks did not stop growing. Thus, the limitations of 3G stops it of being the answer of such demand, and a transition to a powerful technology has become unavoidable. The answer chosen is LTE, developed by the 3GPP organization is assumed to be the predominant telecommunications network in the future. The most relevant advantages are high transmission rates, higher spectral efficiency, reducing latency and operating costs. The key technologies in which LTE is based, are OFDM and its variant schemes for multiple access, OFDMA, used for downlink, and SC-FDMA for the uplink. It also uses multiple antennas systems in order to improve spectral efficiency. Although already implemented in some countries by several operators, continuous research is conducted in order to improve their performance. In this dissertation it is proposed a double space-frequency block coding (D-SFBC) scheme for an OFDM based scenario with 4 transmit antennas and 2 receive antennas (4×2 D-SFBC) for the downlink. In the considered scenario, 4 data symbols are transmitted by using only 2 subcarriers and thus the system is interference limited. To efficiently decode the transmitted data symbols an iterative equalizer designed in frequency domain is developed. Two approaches are considered: parallel interference cancellation (PIC) and successive interference cancellation (SIC). Since only 2 subcarriers are used to transmit 4 data symbols in parallel the developed scheme achieve the double data rate when compared with the 2×2 SFBC, specified in the LTE standard. The developed schemes were evaluated under the main LTE specifications and using channel coding. The results have show that the schemes implemented in this work using an interactive equalizer outperforms the conventional linear equalizers in the interference removal, just by using 2 or 3 iterations

SGD Frequency-Domain Space-Frequency Semiblind Multiuser Receiver with an Adaptive Optimal Mixing Parameter

A novel stochastic gradient descent frequency-domain (FD) space-frequency (SF) semiblind multiuser receiver with an adaptive optimal mixing parameter is proposed to improve performance of FD semiblind multiuser receivers with a fixed mixing parameters and reduces computational complexity of suboptimal FD semiblind multiuser receivers in SFBC downlink MIMO MC-CDMA systems where various numbers of users exist. The receiver exploits an adaptive mixing parameter to mix information ratio between the training-based mode and the blind-based mode. Analytical results prove that the optimal mixing parameter value relies on power and number of active loaded users existing in the system. Computer simulation results show that when the mixing parameter is adapted closely to the optimal mixing parameter value, the performance of the receiver outperforms existing FD SF adaptive step-size (AS) LMS semiblind based with a fixed mixing parameter and conventional FD SF AS-LMS training-based multiuser receivers in the MSE, SER and signal to interference plus noise ratio in both static and dynamic environments

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Quasi-orthogonal SFBC for monostatic MIMO ISAC scenarios

This paper studies the performance of the quasi-orthogonal Tirkkonen spatial-frequency block code (SFBC) for integrated sensing and communication (ISAC) scenarios. The considered scenario is a MIMO monostatic ISAC base station (BS), where transmitter and radar antenna arrays are co-located enabling the virtual array concept. The quasi-orthogonal Tirkkonen SFBC is encapsulated in an OFDM waveform, the radar processing is performed over the resulting OFDM frame. The performance in terms of radar and communication metrics of Tirkkonen SFBC is presented and compared with orthogonal Alamouti SFBC and the spectrally interleaved waveform approach, widely used in radar-like scenarios. The resulting Mean Square Error (MSE) of the Angle of Arrival (AoA) is chosen as the radar metric while the bit-error-rate (BER) is used to present the communication performance. The results show that Tirkkonen is a good candidate for future ISAC scenarios.publishe

Filtered OFDM: an insight into intrinsic in-band interference and filter frequency response selectivity

The future mobile networks will face challenges in support of heterogeneous services over a unified physical layer, calling for a waveform with good frequency localization. Filtered orthogonal frequency division multiplexing (f-OFDM), as a representative subband filtered waveform, can be employed to improve the spectrum localization of orthogonal frequency-division multiplexing (OFDM) signal. However, the applied filtering operations will impact the performance in various aspects, especially for narrow subband cases. Unlike existing studies which mainly focus its benefits, this paper investigates two negative consequences inflicted on single subband f-OFDM systems: in-band interference and filter frequency response (FFR) selectivity. The exact-form expression for the in-band interference is derived, and the effect of FFR selectivity is analyzed for both single antenna and multiple antenna cases. The in-band interference-free and nearly-free conditions for f-OFDM systems are studied. A low-complexity blockwise parallel interference cancellation (BwPIC) algorithm and a pre-equalizer are proposed to tackle the two issues caused by the filtering operations, respectively. Numerical results show that narrower subbands suffer more performance degradation compared to wider bands. In addition, the proposed BwPIC algorithm effectively suppresses interference, and pre-equalized f-OFDM (pf-OFDM) considerably outperforms f- OFDM in both single antenna and multi-antenna systems

On SFBC schemes for enabling virtual array concept in monostatic ISAC scenarios

The integrated sensing and communication (ISAC) paradigm is being proposed for 6G as a new feature of the physical layer (PHY), for tackling dual-functional applications, i.e., demanding radio-sensing and communication functions, such as the Internet of Things (IoT) and autonomous driving systems. This work considers the integration of sensing and communications functionalities in a unique platform. To achieve this goal, the use of orthogonal space frequency block codes (SFBC) is proposed. SFBC code orthogonality enables both the separation of communications data streams at a user terminal and the estimation of target parameters. The SFBC enhances the communications link diversity without requiring channel state information knowledge at the transmitter and enable the virtual antenna array concept for enhancing the direction-finding resolution. The use of different SFBCs provides a tradeoff between achieved diversity and sensing resolution. For example, an Alamouti code, applicable for the case with two transmitting antennas, duplicates sensing resolution and achieves a diversity order of two while the use of a Tarokh code, applicable for a scenario with four transmitting antennas, provides a fourfold better resolution and diversity order of four. However, the code rate achieved with the Tarokh code is half of the one achieved with the Alamouti code. Furthermore, the unambiguous range is reduced since the bandwidth is divided to multiplex the different antenna signals. For its simplicity, good performance and reduced integration requirements, the method is promising for future ISAC systems.publishe

IMPROVED RECEIVER FOR WIRELESS COMMUNICATIONS NETWORKS

An iterative receiver is proposed for receiving in a cell a signal (A) and for providing information carried on said signal (A) by the execution of at least one processing iteration. The receiver comprises: an estimate assembly for receiving the signal (A) and providing, at each one of said processing iterations, a respective information estimate ; a regeneration assembly for receiving, at each processing iteration, said information estimate provided by the estimate assembly at that iteration, and for providing a regenerated signal (B) therefore based on said information estimate and on attenuation of radio channels over which the signal (A) has been transmitted; an interference estimate unit for providing, at each iteration, an interference estimate (C) based on the signal (A) and the regenerated signal (B), the estimate assembly providing, starting from a second processing iteration of said processing iterations, said information estimate based on said interference estimate; and an extraction unit for extracting said information from said information estimate

Residue number system coded differential space-time-frequency coding.

Thesis (Ph.D.)-University of KwaZulu-Natal, Durban, 2007.The rapidly growing need for fast and reliable transmission over a wireless channel motivates the development of communication systems that can support high data rates at low complexity. Achieving reliable communication over a wireless channel is a challenging task largely due to the possibility of multipaths which may lead to intersymbol interference (ISI). Diversity techniques such as time, frequency and space are commonly used to combat multipath fading. Classical diversity techniques use repetition codes such that the information is replicated and transmitted over several channels that are sufficiently spaced. In fading channels, the performance across some diversity branches may be excessively attenuated, making throughput unacceptably small. In principle, more powerful coding techniques can be used to maximize the diversity order. This leads to bandwidth expansion or increased transmission power to accommodate the redundant bits. Hence there is need for coding and modulation schemes that provide low error rate performance in a bandwidth efficient manner. If diversity schemes are combined, more independent dimensions become available for information transfer. The first part of the thesis addresses achieving temporal diversity through employing error correcting coding schemes combined with interleaving. Noncoherent differential modulation does not require explicit knowledge or estimate of the channel, instead the information is encoded in the transitions. This lends itself to the possibility of turbo-like serial concatenation of a standard outer channel encoder with an inner modulation code amenable to noncoherent detection through an interleaver. An iterative approach to joint decoding and demodulation can be realized by exchanging soft information between the decoder and the demodulator. This has been shown to be effective and hold hope for approaching capacity over fast fading channels. However most of these schemes employ low rate convolutional codes as their channel encoders. In this thesis we propose the use of redundant residue number system codes. It is shown that these codes can achieve comparable performance at minimal complexity and high data rates. The second part deals with the possibility of combining several diversity dimensions into a reliable bandwidth efficient communication scheme. Orthogonal frequency division multiplexing (OFDM) has been used to combat multipaths. Combining OFDM with multiple-input multiple-output (MIMO) systems to form MIMO-OFDM not only reduces the complexity by eliminating the need for equalization but also provides large channel capacity and a high diversity potential. Space-time coded OFDM was proposed and shown to be an effective transmission technique for MIMO systems. Spacefrequency coding and space-time-frequency coding were developed out of the need to exploit the frequency diversity due to multipaths. Most of the proposed schemes in the literature maximize frequency diversity predominantly from the frequency-selective nature of the fading channel. In this thesis we propose the use of residue number system as the frequency encoder. It is shown that the proposed space-time-frequency coding scheme can maximize the diversity gains over space, time and frequency domains. The gain of MIMO-OFDM comes at the expense of increased receiver complexity. Furthermore, most of the proposed space-time-frequency coding schemes assume frequency selective block fading channels which is not an ideal assumption for broadband wireless communications. Relatively high mobility in broadband wireless communications systems may result in high Doppler frequency, hence time-selective (rapid) fading. Rapidly changing channel characteristics impedes the channel estimation process and may result in incorrect estimates of the channel coefficients. The last part of the thesis deals with the performance of differential space-time-frequency coding in fast fading channels