Development of PV powered consumer products using future scenarios

Given the high potential of PV technology to reduce the environmental impact of electricity use of consumer products, it would be worthwhile to advance the application of PV systems in mass produced products. To date this field of application has been explored only to a limited extent. For this reason the developers of consumer products, the industrial designers, might be unaware of the possibilities of product-integrated PV systems [1][2]. Their focus on the utility of consumer products might have an added value to existing R&D of PV technology which emphasizes on increased performance and decreased production cost. In the nearby future integration of both points of view might be important to better integrate PV cells in consumer products. Therefore, in this paper, we will assess industrial product design of integrated PV technology in the context of future scenarios. In our project about 25 product designers have conceptually designed products with integrated flexible PV cells within a future scenario. By observing the resulting cases we can evaluate how the design process was established in the framework of integrated technology design, the product phase model and future scenarios. The PV-powered products that will be evaluated are an electronic book, an information bracelet, a floating platform, sports garment and a robotic monitoring device. Each product is supported by visual materials such as renderings and an explanation of the design process based on scenarios

Integrated product and process models: towards an integrated framework and review

While product models and process models have a long standing transiting, there are few models that integrate the two type of models. Those that exist are research systems, which even if validated in industry do not have a broad uptake to date. This paper develops an integrated framework for product and process models based on the purpose the models are put it building on a model of Browning and Ramasesh. Selected integrated model are classified according to the framework. This revealed the no model to date gives equal weight to product and process models

Hybridation of Bayesian networks and evolutionary algorithms for multi-objective optimization in an integrated product design and project management context

A better integration of preliminary product design and project management processes at early steps of system design is nowadays a key industrial issue. Therefore, the aim is to make firms evolve from classical sequential approach (first product design the project design and management) to new integrated approaches. In this paper, a model for integrated product/project optimization is first proposed which allows taking into account simultaneously decisions coming from the product and project managers. However, the resulting model has an important underlying complexity, and a multi-objective optimization technique is required to provide managers with appropriate scenarios in a reasonable amount of time. The proposed approach is based on an original evolutionary algorithm called evolutionary algorithm oriented by knowledge (EAOK). This algorithm is based on the interaction between an adapted evolutionary algorithm and a model of knowledge (MoK) used for giving relevant orientations during the search process. The evolutionary operators of the EA are modified in order to take into account these orientations. The MoK is based on the Bayesian Network formalism and is built both from expert knowledge and from individuals generated by the EA. A learning process permits to update probabilities of the BN from a set of selected individuals. At each cycle of the EA, probabilities contained into the MoK are used to give some bias to the new evolutionary operators. This method ensures both a faster and effective optimization, but it also provides the decision maker with a graphic and interactive model of knowledge linked to the studied project. An experimental platform has been developed to experiment the algorithm and a large campaign of tests permits to compare different strategies as well as the benefits of this novel approach in comparison with a classical EA

An integrated product and process information modelling system for on-site construction

The inadequate infrastructure that exists for seamless project team communications has its roots in the problems arising from fragmentation, and the lack of effective co-ordination between stages of the construction process. The use of disparate computer-aided engineering (CAE) systems by most disciplines is one of the enduring legacies of this problem and makes information exchange between construction team members difficult and, in some cases, impossible. The importance of integrating modelling techniques with a view to creating an integrated product and process model that is applicable to all stages of a construction project's life cycle, is being recognised by the Construction Industry. However, improved methods are still needed to assist the developer in the definition of information model structures, and current modelling methods and standards are only able to provide limited assistance at various stages of the information modelling process. This research investigates the role of system integration by reviewing product and process information models, current modelling practices and modelling standards in the construction industry, and draws conclusions with similar practices from other industries, both in terms of product and process representation, and model content. It further reviews various application development tools and information system requirements to support a suitable integrated information structure, for developing an integrated product and process model for design and construction, based on concurrent engineering principles. The functional and information perspectives of the integrated model, which were represented using IDEFO and the unified modelling language (UML), provided the basis for developing a prototype hyper-integrated product and process information modelling system (HIPPY). Details of the integrated conceptual model's implementation, practical application of the prototype system, using house-building as an example, and evaluation by industry practitioners are also presented. It is concluded that the effective integration of product and process information models is a key component of the implementation of concurrent engineering in construction, and is a vital step towards providing richer information representation, better efficiency, and the flexibility to support life cycle information management during the construction stage of small to medium sized-building projects

A computer-based product classification and component detection for demanufacturing processes

This is an Author's Accepted Manuscript of an article published in International Journal of Computer Integrated Manufacturing, 24(10), 900-914, 2011 [copyright Taylor & Francis], available online at: http://www.tandfonline.com/10.1080/0951192X.2011.579169.The aim of this paper is to propose a novel computer-based product classification, component detection and tracking for demanufacturing and disassembly process. This is achieved by introducing a series of automated and sequential product scanning, component identification, image analysis and sorting – leading to the development of a bill of material (BOM). The produced BOM can then be associated with the relevant disassembly/demanufacture proviso. The proposed integrated image sorting and product classification (ISPC) approach can be considered as a step forward in automation of demanufacturing activities. The ISPC model proposed in this paper utilises and builds on the state-of-the-art technology and current body of research in computer-integrated demanufacturing and remanufacturing (CIDR). An appraisal of the latest research material and the factors that inhibit CIDR methods inpractice are presented. A novel solution for the integration of imaging and material identification techniques toovercome some of the existing shortcomings of automated recycling processes is proposed in this paper. The proposed product scanning and component detection ISPC software consists of four distinct models: the repertory database, the search engine, the product-attributes updater and the image sorting and classification algorithm. The software framework that integrates the four components is presented in this paper. Finally, an overall assessment of applying ISPC at various stages of CIDR processes concludes the article.University of Ibadan MacArthur Foundation Gran

Principles for aerospace manufacturing engineering in integrated new product introduction

This article investigates the value-adding practices of Manufacturing Engineering for integrated New Product Introduction. A model representing how current practices align to support lean integration in Manufacturing Engineering has been defined. The results are used to identify a novel set of guiding principles for integrated Manufacturing Engineering. These are as follows: (1) use a data-driven process, (2) build from core capabilities, (3) develop the standard, (4) deliver through responsive processes and (5) align cross-functional and customer requirements. The investigation used a mixed-method approach. This comprises case studies to identify current practice and a survey to understand implementation in a sample of component development projects within a major aerospace manufacturer. The research contribution is an illustration of aerospace Manufacturing Engineering practices for New Product Introduction. The conclusions will be used to indicate new priorities for New Product Introduction and the cross-functional interactions to support flawless and innovative New Product Introduction. The final principles have been validated through a series of consultations with experts in the sponsoring company to ensure that correct and relevant content has been defined

New Vistas in Chemical Product and Process Design

Design of chemicals-based products is broadly classified into those that are process centered and those that are product centered. In this article, the designs of both classes of products are reviewed from a process systems point of view; developments related to the design of the chemical product, its corresponding process, and its integration are highlighted. Although significant advances have been made in the development of systematic model-based techniques for process design (also for optimization, operation, and control), much work is needed to reach the same level for product design. Timeline diagrams illustrating key contributions in product design, process design, and integrated product-process design are presented. The search for novel, innovative, and sustainable solutions must be matched by consideration of issues related to the multidisciplinary nature of problems, the lack of data needed for model development, solution strategies that incorporate multiscale options, and reliability versus predictive power. The need for an integrated model-experiment-based design approach is discussed together with benefits of employing a systematic computer-aided framework with built-in design templates. </jats:p

Optimizing campaign sizing policies: an application to a real-life setting.

This paper presents an integrated production inventory model that enables to capture the tradeoffs between average inventory, production capacity and customer service level in a semiprocess industry setting. The model includes different features that are specific for such a setting, such as differences in reactor yield and quality requirements across products, the need for cleaning reactors when switching between product types, and the requirement to produce products in campaign sizes that are an integer multiple of the reactor’s batch size. The model can be used to support midterm planning procedures. In this paper, we illustrate the application of the model to real-life data of two product families at a large specialty chemicals company, which for reasons of confidentiality is further referred to as Company C.Queueing; Campaign sizing; (Semi)process industries;

Multiple viewpoint modelling framework enabling integrated product-process design

Nowadays, companies have to cope with numerous constraints at organisational and technical levels in order to improve their competitiveness edges such as productivity, efficiency, and flexibility. Integrated product-process design becomes more and more complex to manage because of increasingly customized products related to various stakeholders and concerns geographically distributed. It is still represents a huge challenge, especially in the early phases of product development process. In such a context, the management of information within integrated product-process design highlights needs in a consistent engineering model that enables product lifecycle management (PLM) integration. The paper presents a novel multiple viewpoint framework called multiple viewpoint assembly oriented, considering product design and assembly process domains in the broader context of concurrent engineering and PLM. The proposed framework describes the consistency, the propagation of information change, and mechanisms of views generation among the product lifecycle stages in order to support assembly oriented design philosophy. A new modelling language called System Modeling Language is used to describe the proposed model from a systems engineering point of view. The implementation of the model in a Web-service called PEGASUS as an application for PLM systems is describe