Multi-Terabit/s IP Switching with Guaranteed Service for Streaming Traffic

traffic on the Internet continues to grow exponentially, there is a real need to solve transmission and switching scalability. Moreover, future Internet traffic will be dominated by streaming media flows, such as video-telephony, video-conferencing, 3D video, virtual reality, and many more. Consequently, network solutions will need to offer quality of service and traffic engineering together with the above mentioned scalability - i.e., over-provisioning is not likely be a viable solution to accommodate streaming media traffic. This paper describes the architecture of a ultra-scalable IP switch and the first experiments with a prototypal implementation. The switch scalability is a consequence of it operating pipeline forwarding of packets, which also results in quality of service guarantees for UDP-based streaming applications, while preserving elastic TCP-based traffic as is, i.e., without affecting any existing applications based on "best- effort" services. Moreover, the prototype demonstrates the low complexity of pipeline forwarding implementation as the deployed network gear was realized from off-the-shelf components in only nine months through the design, implementation, and testing efforts of the authors

The ARIEL Instrument Control Unit design for the M4 Mission Selection Review of the ESA's Cosmic Vision Program

The Atmospheric Remote-sensing Infrared Exoplanet Large-survey mission (ARIEL) is one of the three present candidates for the ESA M4 (the fourth medium mission) launch opportunity. The proposed Payload will perform a large unbiased spectroscopic survey from space concerning the nature of exoplanets atmospheres and their interiors to determine the key factors affecting the formation and evolution of planetary systems. ARIEL will observe a large number (>500) of warm and hot transiting gas giants, Neptunes and super-Earths around a wide range of host star types, targeting planets hotter than 600 K to take advantage of their well-mixed atmospheres. It will exploit primary and secondary transits spectroscopy in the 1.2-8 um spectral range and broad-band photometry in the optical and Near IR (NIR). The main instrument of the ARIEL Payload is the IR Spectrometer (AIRS) providing low-resolution spectroscopy in two IR channels: Channel 0 (CH0) for the 1.95-3.90 um band and Channel 1 (CH1) for the 3.90-7.80 um range. It is located at the intermediate focal plane of the telescope and common optical system and it hosts two IR sensors and two cold front-end electronics (CFEE) for detectors readout, a well defined process calibrated for the selected target brightness and driven by the Payload's Instrument Control Unit (ICU).Comment: Experimental Astronomy, Special Issue on ARIEL, (2017

LIONS: An AWGR-Based Low-Latency Optical Switch for High-Performance Computing and Data Centers

This paper discusses the architecture of an arrayed waveguide grating router (AWGR)-based low-latency interconnect optical network switch called LIONS, and its different loopback buffering schemes. A proof of concept is demonstrated with a 4 x 4 experimental testbed. A simulator was developed to model the LIONS architecture and was validated by comparing experimentally obtained statistics such as average end-to-end latency with the results produced by the simulator. Considering the complexity and cost in implementing loopback buffers in LIONS, we propose an all-optical negative acknowledgement (AO-NACK) architecture in order to remove the need for loopback buffers. Simulation results for LIONS with AO-NACK architecture and distributed loopback buffer architecture are compared with the performance of the flattened butterfly electrical switching network

CROSS-LAYER DESIGN, OPTIMIZATION AND PROTOTYPING OF NoCs FOR THE NEXT GENERATION OF HOMOGENEOUS MANY-CORE SYSTEMS

This thesis provides a whole set of design methods to enable and manage the runtime heterogeneity of features-rich industry-ready Tile-Based Networkon- Chips at different abstraction layers (Architecture Design, Network Assembling, Testing of NoC, Runtime Operation). The key idea is to maintain the functionalities of the original layers, and to improve the performance of architectures by allowing, joint optimization and layer coordinations. In general purpose systems, we address the microarchitectural challenges by codesigning and co-optimizing feature-rich architectures. In application-specific NoCs, we emphasize the event notification, so that the platform is continuously under control. At the network assembly level, this thesis proposes a Hold Time Robustness technique, to tackle the hold time issue in synchronous NoCs. At the network architectural level, the choice of a suitable synchronization paradigm requires a boost of synthesis flow as well as the coexistence with the DVFS. On one hand this implies the coexistence of mesochronous synchronizers in the network with dual-clock FIFOs at network boundaries. On the other hand, dual-clock FIFOs may be placed across inter-switch links hence removing the need for mesochronous synchronizers. This thesis will study the implications of the above approaches both on the design flow and on the performance and power quality metrics of the network. Once the manycore system is composed together, the issue of testing it arises. This thesis takes on this challenge and engineers various testing infrastructures. At the upper abstraction layer, the thesis addresses the issue of managing the fully operational system and proposes a congestion management technique named HACS. Moreover, some of the ideas of this thesis will undergo an FPGA prototyping. Finally, we provide some features for emerging technology by characterizing the power consumption of Optical NoC Interfaces

Unified Synchronized Data Acquisition Networks

The permanently evolving technical area of communication technology and the presence of more and more precise sensors and detectors, enable options and solutions to challenges in science and industry. In high-energy physics, for example, it becomes possible with accurate measurements to observe particles almost at the speed of light in small-sized dimensions. Thereby, the enormous amounts of gathered data require modern high performance communication networks. Potential and efficient implementation of future readout chains will depend on new concepts and mechanisms. The main goals of this dissertation are to create new efficient synchronization mechanisms and to evolve readout systems for optimization of future sensor and detector systems. This happens in the context of the Compressed Baryonic Matter experiment, which is a part of the Facility for Antiproton and Ion Research, an international accelerator facility. It extends an accelerator complex in Darmstadt at the GSI Helmholtzzentrum für Schwerionenforschung GmbH. Initially, the challenges are specified and an analysis of the state of the art is presented. The resulting constraints and requirements influenced the design and development described within this dissertation. Subsequently, the different design and implementation tasks are discussed. Starting with the basic detector read system requirements and the definition of an efficient communication protocol. This protocol delivers all features needed for building of compact and efficient readout systems. Therefore, it is advantageous to use a single unified connection for processing all communication traffic. This means not only data, control, and synchronization messages, but also clock distribution is handled. Furthermore, all links in this system have a deterministic latency. The deterministic behavior enables establishing a synchronous network. Emerging problems were solved and the concept was successfully implemented and tested during several test beam times. In addition, the implementation and integration of this communication methodology into different network devices is described. Therefore, a generic modular approach was created. This enhances ASIC development by supporting them with proven hardware IPs, reducing design time, and risk of failure. Furthermore, this approach delivers flexibility concerning data rate and structure for the network system. Additionally, the design and prototyping for a data aggregation and concentrator ASIC is described. In conjunction with a dense electrical to optical conversion, this ASIC enables communication with flexible readout structures for the experiment and delivers the planned capacities and bandwidth. In the last part of the work, analysis and transfer of the created innovative synchronization mechanism into the area of high performance computing is discussed. Finally, a conclusion of all reached results and an outlook of possible future activities and research tasks within the Compressed Baryonic Matter experiment are presented