Stabilization and control of teleoperation systems with time delays

A control scheme for teleoperation systems with time delay is developed based on the concept of passivity. This control method requires neither detailed knowledge of the manipulator systems nor the mathematical models of the environments, and it is applicable for any time delays. The main contribution of this method is that it is less conservative than the traditional passivity based method. In this method, the passivity controller only operates when the system loses passivity, while in a traditional passivity formulation, the controller works at all times during operation and thus adversely affect the performance of the system.;Using the proposed control scheme, a sub-system is defined that is composed of the communication channel, slave robot and the manipulated environment. This sub system is treated as a one-port network component, and passivity theory is applied to this component to assure stability. The energy flowing into the one-port network, in the form of the control command and the force feedback, is monitored. A passivity regulator is activated to maintain the passivity of the network by modifying the feedback force to the master, and thus adjust the energy exchange between the master and the communication channel.;When this method is applied, only the information at the interface between the master manipulator and the communication channel is collected and observed, there is no need for accurate or detailed knowledge of the structure or timing of the communication channel. The method can make the system lossless regardless of the feedback force, the coordinating force controlling the slave joint motions or the contact force. The approach can stabilize the system regardless of the time delay, discontinuities with environmental contact, or discretization of the physical plant. It will pose no problem when the environmental contact force is directly fed back. The results of this work show that it is advantageous to use the measured environmental force as the feedback, providing superior performance for free motion and more realistic haptic feedback for the operator from the remote environment.;Simulation and experimental results are presented to verify the proposed control scheme

KONTUR-2: Force-feedback Teleoperation from the International Space Station

This paper presents a new robot controller for space telerobotics missions specially designed to meet the requirements of KONTUR-2, a German & Russian telerobotics mission that addressed scientific and technological questions for future planetary explorations. In KONTUR-2, Earth and ISS have been used as a test-bed to evaluate and demonstrate a new technology for real-time telemanipulation from space. During the August 2015' experiments campaign, a cosmonaut teleoperated a robot manipulator located in Germany, using a force-feedback joystick from the Russian segment of the International Space Station (ISS). The focus of the paper is on the design and performance of the bilateral controller between ISS joystick and Earth robot. The controller is based on a 4-Channels architecture in which stability is guaranteed through passivity and the Time Delay Power Network (TDPN) concept. We show how the proposed approach successfully fulfills mission requirements, specially those related to system operation through space links and internet channels, involving time delays and data losses of different nature

Control in the operational space of bilateral teleoperators with time-delays and without velocity measurements¿

This paper proposes a control scheme in the operational space for bilateral teleoperation systems composed of heterogeneous robots (kinematically and dynamically different) without velocity sensors and considering variable time-delays in the interconnection. The proposed control scheme use a second order dynamical controller that back-propagates damping to the local and the remote manipulators. Under the assumptions that the human operator and the environment define passive maps from force to velocity, it is proved that velocities and pose (position and orientation) errors between the local and the remote manipulators are bounded. Moreover, in the case that the human and the environment forces are zero, the velocities and pose errors converge asymptotically to zero. The proposed approach employs, the singularity-free, unit-quaternions to represent the orientation of the end-effectors. The performance of the proposed controller is illustrated via simulations with a teleoperation system composed of robots with 3-DoF and 7-DoF.Peer ReviewedPostprint (published version

Control of Cooperative Haptics-Enabled Teleoperation Systems with Application to Minimally Invasive Surgery

Robot-Assisted Minimally Invasive Surgical (RAMIS) systems frequently have a structure of cooperative teleoperator systems where multiple master-slave pairs are used to collaboratively execute a task. Although multiple studies indicate that haptic feedback improves the realism of tool-tissue interaction to the surgeon and leads to better performance for surgical procedures, current telesurgical systems typically do not provide force feedback, mainly because of the inherent stability issues. The research presented in this thesis is directed towards the development of control algorithms for force reflecting cooperative surgical teleoperator systems with improved stability and transparency characteristics. In the case of cooperative force reflecting teleoperation over networks, conventional passivity based approaches may have limited applicability due to potentially non-passive slave-slave interactions and irregular communication delays imposed by the network. In this thesis, an alternative small gain framework for the design of cooperative network-based force reflecting teleoperator systems is developed. Using the small gain framework, control algorithms for cooperative force-reflecting teleoperator systems are designed that guarantee stability in the presence of multiple network-induced communication constraints. Furthermore, the design conservatism typically associated with the small-gain approach is eliminated by using the Projection-Based Force Reflection (PBFR) algorithms. Stability results are established for networked cooperative teleoperator systems under different types of force reflection algorithms in the presence of irregular communication delays. The proposed control approach is consequently implemented on a dual-arm (two masters/two slaves) robotic MIS testbed. The testbed consists of two Haptic Wand devices as masters and two PA10-7C robots as the slave manipulators equipped with da Vinci laparoscopic surgical instruments. The performance of the proposed control approach is evaluated in three different cooperative surgical tasks, which are knot tightening, pegboard transfer, and object manipulation. The experimental results obtained indicate that the PBFR algorithms demonstrate statistically significant performance improvement in comparison with the conventional direct force reflection algorithms. One possible shortcoming of using PBFR algorithms is that implementation of these algorithms may lead to attenuation of the high-frequency component of the contact force which is important, in particular, for haptic perception of stiff surfaces. In this thesis, a solution to this problem is proposed which is based on the idea of separating the different frequency bands in the force reflection signal and consequently applying the projection-based principle to the low-frequency component, while reflecting the high-frequency component directly. The experimental results demonstrate that substantial improvement in transient fidelity of the force feedback is achieved using the proposed method without negative effects on the stability of the system