Pipelining of register transfer netlists

This paper describes a method for pipelining of register-to-register netlists. We define algorithms for inserting latches in a data path, both inside each unit and between the units as well as between control logic and the data path and for readjusting the state transition table. Experimental results on several benchmarks show 30%-40% improvement in performance

A Methodology to Design Pipelined Simulated Annealing Kernel Accelerators on Space-Borne Field-Programmable Gate Arrays

Increased levels of science objectives expected from spacecraft systems necessitate the ability to carry out fast on-board autonomous mission planning and scheduling. Heterogeneous radiation-hardened Field Programmable Gate Arrays (FPGAs) with embedded multiplier and memory modules are well suited to support the acceleration of scheduling algorithms. A methodology to design circuits specifically to accelerate Simulated Annealing Kernels (SAKs) in event scheduling algorithms is shown. The main contribution of this thesis is the low complexity scoring calculation used for the heuristic mapping algorithm used to balance resource allocation across a coarse-grained pipelined data-path. The methodology was exercised over various kernels with different cost functions and problem sizes. These test cases were benchedmarked for execution time, resource usage, power, and energy on a Xilinx Virtex 4 LX QR 200 FPGA and a BAE RAD 750 microprocessor

Vector processor virtualization: distributed memory hierarchy and simultaneous multithreading

Taking advantage of DLP (Data-Level Parallelism) is indispensable in most data streaming and multimedia applications. Several architectures have been proposed to improve both the performance and energy consumption for such applications. Superscalar and VLIW (Very Long Instruction Word) processors, along with SIMD (Single-Instruction Multiple-Data) and vector processor (VP) accelerators, are among the available options for designers to accomplish their desired requirements. On the other hand, these choices turn out to be large resource and energy consumers, while also not being always used efficiently due to data dependencies among instructions and limited portion of vectorizable code in single applications that deploy them. This dissertation proposes an innovative architecture for a multithreaded VP which separates the path for performing data shuffle and memory-indexed accesses from the data path for executing other vector instructions that access the memory. This separation speeds up the most common memory access operations by avoiding extra delays and unnecessary stalls. In this multilane-based VP design, each vector lane uses its own private memory to avoid any stalls during memory access instructions. More importantly, the proposed VP has an innovative multithreaded architecture which makes it highly suitable for concurrent sharing in multicore environments. To this end, the VP which is developed in VHDL and prototyped on an FPGA (Field-Programmable Gate Array), serves as a coprocessor for one or more scalar cores in various system architectures presented in the dissertation. In the first system architecture, the VP is allocated exclusively to a single scalar core. Benchmarking shows that the VP can achieve very high performance. The inclusion of distributed data shuffle engines across vector lanes has a spectacular impact on the execution time, primarily for applications like FFT (Fast-Fourier Transform) that require large amounts of data shuffling. In the second system architecture, a VP virtualization technique is presented which, when applied, enables the multithreaded VP to simultaneously execute many threads of various vector lengths. The threads compete simultaneously for the VP resources having as a goal an improved aggregate VP utilization. This approach yields high VP utilization even under low utilization for the individual threads. A vector register file (VRF) virtualization technique dynamically allocates physical vector registers to running threads. The technique is implemented for a multi-core processor embedded in an FPGA. Under the dynamic creation of threads, benchmarking demonstrates large VP speedups and drastic energy savings when compared to the first system architecture. In the last system architecture, further improvements focus on VP virtualization relying exclusively on hardware. Moreover, a pipelined data shuffle network replaces the non-pipelined shuffle engines. The VP can then take advantage of identical instruction flows that may be present in different vector applications by running in a fused instruction mode that increases its utilization. A power dissipation model is introduced as well as two optimization policies towards minimizing the consumed energy, or the product of the energy and runtime for a given application. Benchmarking shows the positive impact of these optimizations

An efficient implementation of lattice-ladder multilayer perceptrons in field programmable gate arrays

The implementation efficiency of electronic systems is a combination of conflicting requirements, as increasing volumes of computations, accelerating the exchange of data, at the same time increasing energy consumption forcing the researchers not only to optimize the algorithm, but also to quickly implement in a specialized hardware. Therefore in this work, the problem of efficient and straightforward implementation of operating in a real-time electronic intelligent systems on field-programmable gate array (FPGA) is tackled. The object of research is specialized FPGA intellectual property (IP) cores that operate in a real-time. In the thesis the following main aspects of the research object are investigated: implementation criteria and techniques. The aim of the thesis is to optimize the FPGA implementation process of selected class dynamic artificial neural networks. In order to solve stated problem and reach the goal following main tasks of the thesis are formulated: rationalize the selection of a class of Lattice-Ladder Multi-Layer Perceptron (LLMLP) and its electronic intelligent system test-bed – a speaker dependent Lithuanian speech recognizer, to be created and investigated; develop dedicated technique for implementation of LLMLP class on FPGA that is based on specialized efficiency criteria for a circuitry synthesis; develop and experimentally affirm the efficiency of optimized FPGA IP cores used in Lithuanian speech recognizer. The dissertation contains: introduction, four chapters and general conclusions. The first chapter reveals the fundamental knowledge on computer-aideddesign, artificial neural networks and speech recognition implementation on FPGA. In the second chapter the efficiency criteria and technique of LLMLP IP cores implementation are proposed in order to make multi-objective optimization of throughput, LLMLP complexity and resource utilization. The data flow graphs are applied for optimization of LLMLP computations. The optimized neuron processing element is proposed. The IP cores for features extraction and comparison are developed for Lithuanian speech recognizer and analyzed in third chapter. The fourth chapter is devoted for experimental verification of developed numerous LLMLP IP cores. The experiments of isolated word recognition accuracy and speed for different speakers, signal to noise ratios, features extraction and accelerated comparison methods were performed. The main results of the thesis were published in 12 scientific publications: eight of them were printed in peer-reviewed scientific journals, four of them in a Thomson Reuters Web of Science database, four articles – in conference proceedings. The results were presented in 17 scientific conferences

Estimation of WCET using a little language to describe microcontrollers and DSPs architectures

A method for analysing and predicting the timing properties of a program fragment will be described. First a little language implemented to describe a processor’s architecture is presented followed by the presentation of a new static WCET estimation method. The timing analysis starts by compiling a processor’s architecture program followed by the disassembling of the program fragment. After sectioning the assembler program into basic blocks call graphs are generated and these data are later used to evaluate the pipeline hazards and cache miss that penalize the real-time performance. Some experimental results of using the developed tool to predict the WCET of code segments using some Intel microcontroller are presented. Finally, some conclusions and future work are presented

Power-Aware Design Methodologies for FPGA-Based Implementation of Video Processing Systems

The increasing capacity and capabilities of FPGA devices in recent years provide an attractive option for performance-hungry applications in the image and video processing domain. FPGA devices are often used as implementation platforms for image and video processing algorithms for real-time applications due to their programmable structure that can exploit inherent spatial and temporal parallelism. While performance and area remain as two main design criteria, power consumption has become an important design goal especially for mobile devices. Reduction in power consumption can be achieved by reducing the supply voltage, capacitances, clock frequency and switching activities in a circuit. Switching activities can be reduced by architectural optimization of the processing cores such as adders, multipliers, multiply and accumulators (MACS), etc. This dissertation research focuses on reducing the switching activities in digital circuits by considering data dependencies in bit level, word level and block level neighborhoods in a video frame. The bit level data neighborhood dependency consideration for power reduction is illustrated in the design of pipelined array, Booth and log-based multipliers. For an array multiplier, operands of the multipliers are partitioned into higher and lower parts so that the probability of the higher order parts being zero or one increases. The gating technique for the pipelined approach deactivates part(s) of the multiplier when the above special values are detected. For the Booth multiplier, the partitioning and gating technique is integrated into the Booth recoding scheme. In addition, a delay correction strategy is developed for the Booth multiplier to reduce the switching activities of the sign extension part in the partial products. A novel architecture design for the computation of log and inverse-log functions for the reduction of power consumption in arithmetic circuits is also presented. This also utilizes the proposed partitioning and gating technique for further dynamic power reduction by reducing the switching activities. The word level and block level data dependencies for reducing the dynamic power consumption are illustrated by presenting the design of a 2-D convolution architecture. Here the similarities of the neighboring pixels in window-based operations of image and video processing algorithms are considered for reduced switching activities. A partitioning and detection mechanism is developed to deactivate the parallel architecture for window-based operations if higher order parts of the pixel values are the same. A neighborhood dependent approach (NDA) is incorporated with different window buffering schemes. Consideration of the symmetry property in filter kernels is also applied with the NDA method for further reduction of switching activities. The proposed design methodologies are implemented and evaluated in a FPGA environment. It is observed that the dynamic power consumption in FPGA-based circuit implementations is significantly reduced in bit level, data level and block level architectures when compared to state-of-the-art design techniques. A specific application for the design of a real-time video processing system incorporating the proposed design methodologies for low power consumption is also presented. An image enhancement application is considered and the proposed partitioning and gating, and NDA methods are utilized in the design of the enhancement system. Experimental results show that the proposed multi-level power aware methodology achieves considerable power reduction. Research work is progressing In utilizing the data dependencies in subsequent frames in a video stream for the reduction of circuit switching activities and thereby the dynamic power consumption